PURE Contour 100Di User manual

1
ES
FR
IT
ES
NL
DA
FR
ENGLISH
ES
DA
IT
DE
Thank you for choosing Contour 100Di. This manual
will get you up and running in no time, and explains
how to make the most of your Contour 100Di. We’re
constantly improving and adding new features to our
products. To take advantage of any enhancements
made since your product was shipped, please visit
support.pure.com where you can download the latest
version of this user guide in PDF format.

2
Safety Instructions
1. Keep the unit away from heat sources.
2. Avoid objects or liquids getting into the unit.
3. Do not remove screws from or open the unit casing.
4. Fit the mains adaptor to an easily accessible socket, located near the unit and ONLY
use the mains power adapter supplied.
5. Should not be immersed in water, used in shower or bathroom if plugged into the
mains.
Copyright
Copyright 2015 by Imagination Technologies Limited. All rights reserved. No part of this publication may be copied
or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer
language, in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to
third parties without the express written permission of Imagination Technologies Limited.
Trademarks
Contour, Pure, the Pure logo, Imagination Technologies, and the Imagination Technologies logo are trademarks
or registered trademarks of Imagination Technologies Limited. iPad, iPod and iPhone are trademarks of Apple
Inc., registered in the U.S. and other countries. “Made for iPod,” and “Made for iPhone,” mean that an electronic
accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone
may affect wireless performance. All other product names are trademarks of their respective companies. Version 4
November 2015.
Warranty Information
Imagination Technologies Limited warrants to the end user that this product will be free from defects in materials
and workmanship in the course of normal use for a period of two years from the date of purchase. This guarantee
covers breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage,
however caused, wear and tear, negligence, adjustment, modification or repair not authorised by us. Please visit
www.pure.com/register to register your product with us. Should you have a problem with your unit please contact
your supplier or contact Pure Support at the address shown on the rear of this manual. If you need to return your
product please use the original packaging and include all parts and accessories. We reserve the right to refuse
incomplete or badly packaged returns.
Disclaimer
Imagination Technologies Limited makes no representation or warranties with respect to the content of this docu-
ment and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Further, Imagination Technologies Limited reserves the right to revise this publication and to make changes in it
from time to time without obligation of Imagination Technologies Limited to notify any person or organization of
such revisions or changes.

EN
3
Contents
4 Getting started
4 Setting up
5 Controls and connectors
6 Remote control
6 Display
7 Listening to iPod/iPhone/iPad
8 Listening to radio
8 Selecting Digital or FM radio
8 Changing stations
8 Saving and selecting your favourite stations
8 Changing the information displayed on screen
9 Pure Connect app
10 Using the aux input
10 Using the sleep timer
11 Using the alarms
11 Setting an alarm
12 Cancelling a sounding alarm
12 Snoozing a sounding alarm
12 Changing the snooze duration
12 Cancelling a snoozing alarm
13 Options and settings
13 Digital radio options
13 FM radio options
13 General options
15 Help
15 Secondary and inactive stations
15 Hints and tips
15 Software updates
16 Specifications

4
Pull the plastic tab from
the remote control
battery compartment
and remove the
protective film from
remote buttons.
Press and on the remote to view the
available languages (English/French/German/
Italian) used for displaying menus and options
and press Select to confirm your choice.
Fully extend the aerial.
Getting started
Setting up
LANGUAGE
Insert the connector of the
mains power adapter into
the socket on the rear of the
radio.
Attach the appropriate
adapter pins for your region,
if required and plug in to the
mains supply.
4
1 2
3
4
Wait for Contour 100Di to complete an
autotune, which finds all available digital
stations (this takes about one minute).
When the autotune is complete, a digital
station will be selected.
4
5
SCAN 26
DR
DR
bBC R2

EN
5
Controls and connectors
Bass port
Remote
control holder
Storage recess
for remote
control.
Telescopic
Aerial
Power adapter
socket
Connector for supplied
mains power adapter.
Headphone
socket
3.5mm stereo
headphone socket.
Aux In socket
Analogue stereo
input for iPod/
MP3 player.
USB socket
USB connector for
software updates
(mini-B type).
On/
Standby
Source
Press to change
between Digital
radio, FM, iPod,
and Auxiliary input.
Favourites/Snooze
Press and repeat to browse
through your favourite stations.
Press to snooze a sounding
alarm.
Mute
Volume down
Volume up
iPod/iPhone/
iPad dock
Press the right
hand end of
the front panel
to release the
iPod dock.
LCD display

6
Remote control
Display
On/Standby Source
Press to change between
Digital radio, FM, iPod,
and Auxiliary input.
Favourites
Press to view your favourite
stations list. Then press and
hold to save the current
station.
Mute
Volume down
Volume up
Snooze
Press to view the current
Snooze time. Use and
Select to change. Press to
snooze a sounding alarm.
Sleep
Press and repeat to set a
sleep timer.
Alarm
Press and repeat to view
alarm status. Press Select
to change status or alarm
settings.
Menu
Press to view options menu
to change settings.
In iPod source press to
navigate iPod menu. Press
and hold to view options
menu.
and Select
Browse and select tracks and
menu options.
In FM step down and
up the frequency range in
steps of 0.05 MHz. Press and
hold to seek tune to the next
station.
Repeat
Toggle to repeat current track,
repeat all or no repeat.
Shuffle
Shuffle the track playback
order.
and Skip to start
of current track or go
to previous/next track.
Hold to fast rewind
or fast forward. In FM
seek tune to the next
station.
Play/Pause
Play/pause current track.
Volume
Source
indicators
Repeat one
Repeat all
Sleep
timer set
Alarm
snoozed
Alarm
1/2 set
Signal strength
Text area
Scroll
indicator
Scroll
indicator
Shuffle
bBC R2
DR iPod
1
A X
2
1
FM

EN
7
Listening to iPod/iPhone/iPad
Compatibility
Contour 100Di is compatible with most iPod, iPhone and iPad models. For the
latest information, check the compatibility table on our website:
www.pure.com/products/ipod-compatibility.
Docking your device
1. Push the right hand end of the front panel as shown to release the dock.
2. Carefully dock your device onto the connector.
Your device will start charging as soon as it is docked and will continue
charging whether Contour 100Di is switched on or in standby*.
Note The headphone socket is disabled when an iPhone/iPod/iPad is docked.
Selecting the iPod source
Press the Source button to select IPOD. On devices with apps you can also play
audio from other apps e.g. the Pure Connect internet radio app, if you pause the
iPod playback.
Controlling your device
When the iPod source is selected your device will start playing the last iPod track
you were listening to. Use the remote or controls on your Apple device to navigate
menus and control playback.
To access the Contour 100Di options menu while you have an iPod/iPhone
docked, press and hold the Menu button on the remote.
Changing the information displayed on screen
Press and hold the Menu button, press Select to choose the DISPLAY option.
Choose one of the following options:
TITLE/ARTIST Track title and artist name.
TIME Full screen clock.

8
Listening to radio
Selecting Digital or FM radio
Press the Source button to select DIGITAL or FM. You’ll see the relevant icon.
Changing stations
Digital
Press and to browse the available station and press Select to tune to a station.
FM
Press or (or hold or ) to seek to the next station with a strong signal.
Press or to change the frequency in steps of 0.05 MHz.
Saving and selecting your favourite stations
You can save up to 40 (FM or digital) stations in a list for easy access.
Saving
1. Tune to the station you want to save as a favourite.
2. Press on the remote to view the favourites list.
3. Press or on the remote to decide where you want to save the favourite (if
you choose an existing favourite it will be replaced).
4. Press and hold down or Select on the remote until you see ‘SAVED’ on the
screen.
Selecting
Press on the unit or remote to view the favourites list.
Press again on the unit to cycle through the list or press or on the remote.
Wait for the station to change if using the main unit or press Select on the remote
to change immediately.
Changing the information displayed on screen
Press the Menu button, press and to browse and press Select to choose the
DISPLAY option.
Choose one of the following options:
STATION Station name or frequency.
TEXT Scrolling text broadcast by the station.
TIME Full screen clock updated by the radio broadcast.

EN
9
Pure Connect app
Make the most of Contour’s high quality audio by installing the free Pure Connect
app on your iPod touch or iPhone. The Pure Connect app gives you free access to
thousands of internet radio stations, on demand content (podcasts and listen again
programmes) and ambient sounds.
iOS Pure Connect App

10
Using the aux input
Connecting an auxiliary device
Connect the line out or headphone socket of your auxiliary device to the Aux-In
socket on your Contour 100Di using a suitable cable.
Selecting the auxiliary input
Press the Source button to select AUX.
Using the sleep timer
The sleep timer switches your radio into standby after a number of minutes has
elapsed.
Setting the sleep timer
1. Press the Sleep button on the remote and repeat to increase the duration of
the sleep timer from 15 to 90 minutes.
2. Push Select, or wait to start the sleep timer.
The icon on the screen indicates when the sleep timer is set.
Tip Push the Sleep button again at any time to view the time remaining.
Cancelling the sleep timer
Press the Sleep button and set the timer duration to OFF.

EN
11
Using the alarms
Contour 100Di has two alarms which you can set to sound a tone, tune to a radio
station or play a track from your iPod/iPhone.
Setting an alarm
Press the Alarm button on the remote to show the
status of Alarm 1, press or to show the status of
Alarm 2.
Press the Select button to choose and adjust either
alarm and press or and Select to adjust the
following settings:
Alarm on/off
Press or to choose between ‘ON’ (alarm sounds)
or ‘OFF’ (alarm does not sound) and press Select.
Time
Set the alarm time. Press or to adjust the hours
then press Select. Repeat to set the minutes then
press Select.
Days
Set the days that the alarm sounds. Press or
to choose between: DAILY (every day), ONCE (no
repeat), WEEKENDS or WEEKDAYS (Monday to
Friday) then press Select.
Type
Press or to choose between: DIGITAL, FM, IPOD
or TONE (buzzer).
Station
If you’ve set alarm mode as DIGITAL or FM, press
or to choose between: LAST USED (Last station
tuned to) or select a favourite if you have any saved.
Note: NO PRESETS is displayed if you have not
created any favourites.
Volume
Press or to change the alarm volume then press
Select.
DR
DR
DAILY
DR
LAST USE
DR
DR
DIGITAL
DR
DR
ON

12
You see the message ‘SAVED’ once you have
completed all the alarm settings.
The
1
and
2
icons on the screen indicate when an alarm is set.
Cancelling a sounding alarm
To cancel a tone alarm press the Alarm, Select or Standby button.
To cancel a radio alarm press any button except volume.
Note A sounding alarm will switch off after one hour unless you cancel it.
Snoozing a sounding alarm
To snooze a sounding alarm press the Favourites button on Contour or the
Snooze button on the remote. The alarm will be silenced for 10 minutes (the
default snooze time) then sound again.
The icon on the screen indicates when an alarm is snoozed.
Changing the snooze duration
The default snooze time for the alarms is 10 minutes. To change the snooze time:
Press the Snooze button on the remote and press or to choose a snooze
duration then press Select to confirm.
Cancelling a snoozing alarm
To cancel a snoozing alarm press the Alarm or Select button.
SAVED
DR
1

EN
13
Options and settings
Press the Menu button to access the options menu, press or to scroll through
and change the options and press Select to confirm. Current value of settings are
indicated by an asterisk ( ).
Digital radio options
Autotune
Scans all digital frequencies for stations, automatically adds any new stations found
to the station list and removes inactive stations. To stop an autotune press Menu.
FM radio options
FM Stereo
Choose from Stereo or Mono (default). Mono may improve audio clarity where
stereo signals are weak.
General options
Clock
The clock is automatically set if you have a good digital or FM (RDS) signal and will
automatically update for daylight saving time. You can adjust the following settings:
SET TIME Manually set the time and date if required.
12/24HR Choose between 12 or 24 hour time display.
SNOOZE Set your preferred snooze duration for alarms.
SYNC TO Choose the radio source that you want to use for setting the
time.
BOTH (Default) Set the time by using both the digital and FM
(RDS) radio signal.
DIGITAL Set the time using the digital radio signal.
FM Set the time using the FM (RDS) signal.

14
Backlight
DURATION
Choose how long the backlight remains switched on:
TIMED The backlight turns on for 7 seconds when any button is pressed
(default).
OFF The backlight does not switch on.
ON The backlight is always on when the radio is on.
LEVEL
Choose the brightness of the backlight:
AUTO Adjusts automatically depending on the light level in your
room (default).
1-5 Set a brightness level between 1 (dim) and 5 (bright).
Audio
Adjust the bass and treble:
BASS Adjust the bass between -3 (minimal bass), 0 (neutral) and 3
(maximum bass).
TREBLE Adjust the treble between -3 (minimal treble), 0 (neutral) and
3 (high treble).
Language
Choose from English, French, German or Italian.
Reset
Reset removes all saved favourites and resets all options to their defaults.
Choose YES to confirm the reset or NO to cancel the reset.

EN
15
*Requires a PC (not Mac) with internet access running Windows XP/Vista/7 and a suitable USB cable (not included).
Help
Secondary and inactive stations
Secondary digital services
Secondary services accompany some stations, providing extra information or
alternative content and may only be broadcast at certain times. Secondary services
will appear next to the primary station in the list.
Hints and tips
Display says ‘NO SIG’
Use Autotune (page 13) to search for stations. Try adjusting your aerial or radio
position.
Receiving new digital stations that have started broadcasting
Use Autotune (page 13) to scan for new stations and add any new stations to
the station list.
Software updates
Software updates for your Contour 100Di may be made available in the future.
If you register your product and include a valid e-mail address you will receive
notification of software updates (register at www.pure.com/register). Available
software updates are also listed at: http://support.pure.com.*
To upgrade:
1. From Digital radio, FM or Aux sources, press and hold the Menu button on the
remote for three seconds to access the maintenance menu.
2. Select UPGRADE and follow the instructions provided with the upgrade
software*.

16
Specifications
Radio Digital and FM. UK products receive DAB and FM; non-UK
products receive DAB/DAB+/DMB-Radio/FM depending on
region.
iPod/iPhone/iPad Supports most iPod, iPhone and iPad models.
For the latest information, check the compatibility table on
our website: www.pure.com/products/ipod-compatibility.
Speakers 2 full-range 3" drive units.
Audio output 2 x 10W RMS. Rear bass port.
Input connectors 12V DC power adapter socket. iPod/iPhone/iPad
connector. 3.5mm Aux-in for auxiliary devices. USB (mini-B
type) for software updates.
Output connectors 3.5mm stereo output for headphones.
LCD display Custom auto-dimming LCD display, large text and feature
icons.
Remote control Infrared remote control. CR2025 button cell battery
included.
Mains power supply 100-240V, 50/60Hz 12V DC 2.4A external power adapter.
Dimensions 308mm wide x 174mm high x 145mm deep.
Aerial Telescopic aerial.
Approvals CE marked. Compliant with the EMC and Low Voltage
Directives (2004/108/EC and 2006/95/EC). ETSI EN 300
401 compliant.
Disposal of Waste Electrical & Electronic Equipment
This symbol on the product or on its packaging indicates that this product should
not be treated as household waste. Instead it should be handed over to a suitable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about
recycling of this product, please contact your local council office, your household
waste disposal service or the shop where you purchased the product.

ES
FR
IT
DEUTSCH
ES
NL
DA
ES
FR
EN
ES
DA
IT
1
Vielen Dank, dass Sie sich für das Contour 100Di
entschieden haben. Mit diesem Handbuch ist
das Gerät in kürzester Zeit betriebsbereit. Lesen
Sie hier, wie Sie die fantastischen Funktionen
des Contour 100Di optimal nutzen können. Wir
arbeiten ständig daran, unsere Produkte weiter zu
verbessern und um neue Funktionen zu erweitern.
Um die vielen Erweiterungen zu nutzen, die seit der
Auslieferung Ihres Geräts vorgenommen wurden,
besuchen Sie bitte www.pure.com. Hier können Sie
die neueste Version dieses Benutzerhandbuchs im
PDF-Format herunterladen.

2
Sicherheitsanweisungen
1. Halten Sie das Gerät fern von Wärmequellen.
2. Lassen Sie keine Objekte oder Flüssigkeiten in das Gerät eindringen.
3. Nehmen Sie keine Schrauben vom Gehäuse ab und öffnen Sie das Gehäuse nicht.
4. Verbinden Sie den Netzadapter mit einer leicht erreichbaren Steckdose in der Nähe des
Geräts, und verwenden Sie NUR den mitgelieferten Netzadapter.
5. Das Gerät darf nicht in Wasser getaucht oder in der Dusche oder im Badezimmer
verwendet werden, wenn es an den Netzstrom angeschlossen ist.
Copyright
Copyright 2015, Imagination Technologies Limited. Alle Rechte vorbehalten. Ohne ausdrückliche schriftliche
Zustimmung durch Imagination Technologies Limited ist jede Vervielfältigung dieser Publikation auch
auszugsweise sowie ihre Verbreitung, Übermittlung, Abschrift, Speicherung in einem Datenverarbeitungssystem
oder Übersetzung in eine natürliche Sprache oder Programmiersprache in jeglicher Form, sei sie elektronisch,
mechanisch, magnetisch, manuell oder anderweitig, und jegliche Offenlegung an Dritte verboten.
Marken
Contour, Pure, das Pure Logo, Imagination Technologies und das Imagination Technologies Logo sind
Warenzeichen oder eingetragene Warenzeichen von Imagination Technologies Limited. iPad, iPod und iPhone
sind in den USA und in anderen Ländern eingetragene Warenzeichen von Apple Inc. “Made for iPod” und “Made
for iPhone” bedeuten, dass elektronisches Zubehör eigens für den Anschluss an einen iPod bzw. ein iPhone
entwickelt wurde und der Entwickler die Erfüllung der Leistungsstandards von Apple bestätigt. Apple ist nicht
für die Funktion dieses Geräts und für die Einhaltung der Sicherheits- und sonstigen Auflagen verantwortlich.
Bitte beachten Sie, dass die Verwendung dieses Zubehörs mit iPod bzw. iPhone sich auf die Wireless-Leistung
auswirken kann. Alle anderen Produkte sind Marken der jeweiligen Unternehmen. Version 4. November 2015.
Garantieerklärung
Imagination Technologies Ltd. garantiert dem Endverbraucher, dass dieses Gerät frei von Material- und
Herstellungsfehlern im Rahmen des normalen Gebrauchs ist. Diese Garantie gilt für einen Zeitraum von zwei
Jahren ab Kaufdatum. Die Garantie umfasst Störungen aufgrund von Herstellungs- oder Ausführungsfehlern.
Sie gilt jedoch nicht für Unfallschäden jeglicher Art und Schäden, die auf Verschleiß, Fahrlässigkeit oder von uns
nicht autorisierte Anpassungen, Änderungen oder Reparaturen zurückzuführen sind. Bitte registrieren Sie Ihr
Produkt unter www.pure.com/register. Sollten Probleme mit Ihrem Gerät auftauchen, wenden Sie sich bitte an
Ihren Händler oder an den Pure-Support unter der Adresse, die auf der Rückseite dieses Handbuchs aufgeführt
wird. Verwenden Sie bei Rücksendungen bitte die Originalverpackung und fügen Sie alle Teile und das vollständige
Zubehör bei. Wir behalten uns das Recht vor, unvollständige oder unzureichend verpackte Rücksendungen
abzulehnen.
Haftungsausschluss
Imagination Technologies Limited übernimmt keine Verantwortung oder Garantie bezüglich des Inhalts dieses
Dokuments und weist insbesondere alle konkludenten Zusagen der Marktgängigkeit und der Eignung für
einen bestimmten Zweck zurück. Weiterhin behält sich Imagination Technologies Limited das Recht vor, diese
Veröffentlichung zu überarbeiten und von Zeit zu Zeit Änderungen vorzunehmen, ohne dass Imagination
Technologies Limited dazu verpflichtet ist, Personen oder Organisationen über solche Überarbeitungen oder
Änderungen zu benachrichtigen.