PureLink PureTools PT-HDBT-200 User manual

User Manual
PT-HDBT-200
User Manual
HDBaseT Extender, 4K (60Hz 4:4:4) HDR with VLC
Model PT-HDBT-200
Designed in Germany
© 2017 PureLink GmbH All rights reserved. VersionV1.0

User Manual
PT-HDBT-200
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual are for reference only. Different model layouts and specifications are subject
to the physical product.
This manual is for operation instructions only, not for any maintenance usage.
In the constant effort to improve our product, we reserve the right to make changes in
functions or parameters without prior notice or obligation.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this
manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in
a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever measures
may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

User Manual
PT-HDBT-200
REACH | 1907/2006/EU
ROHS | 2011/65/EU
PureLink hereby declares that this product PureTools PT-HDBT-200 complies with
Directives 1907/2006/EU und 2011/65/EU.
EMC / LVD (Electro Magnetic Compatibility / Low Voltage Directive)
PureLink GmbH hereby declares that this product PureTools PT-HDBT-200 complies
with Directives 2014/30/EU and 2014/35/EU. The full text of the EU Declaration of
Conformity is available at the following Internet address:
http://www.purelink.de/ce/4251364706787_CE.pdf

User Manual
PT-HDBT-200
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before
using the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material
for possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
Do not dismantle the housing or modify the module. It may result in electrical
shock or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module
immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power
to the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

User Manual
PT-HDBT-200
1
Introduction to PT-HDBT-200
The PT-HDBT-200 is an ultra-thin HDMI2.0 Extender consist of PT-HDBT-200-TX
transmitter and PT-HDBT-200-RX receiver. It extends 1080p/4K HDMI signal over
CAT5e/CAT6a cable up to 70m /40m (PoC), and enables IR and RS232 pass-through to
control source or display device remotely. It also adopt a visually lossless video
compression technology (VLC) to ensure the HD lossless transmission of HDR and
4K@60Hz/4:4:4 over CAT5e/CAT6a cable.
Feature
Supports 4K/UHD/60Hz/4:4:4.
Supports HDMI2.0 & HDCP2.2, and is backward compatible to the previous
version.
Maximum transmission distance is up to 40m for 4Kx2K, and 70m for 1080p.
Supports CEC, IR and RS232 pass-through for long-distance control.
Supports bi-directional PoC for simplified wiring.
Supports HDR.
Features DIP switch for choosing mode from: Control, Update A, Update B.
Package List
1 x PT-HDBT-200-TX Transmitter
1 x PT-HDBT-200-RX Receiver
4 x Mounting Ears & 4 x Screws
8 x Plastic Cushions
2 x 3-pin Phoenix Connector
1 x Power Adaptor (12VDC, 2A)
1 x User Manual
Panel Description
Transmitter
CTRL
UPDATE B UPDATE A
Tx Rx DC 12V
IROUT IRIN
HDBT OUT
HDMIIN
12345678

User Manual
PT-HDBT-200
2
Receiver
No.
Name
Description
①
MODE Switcher
CTRL: RS232 pass-through control mode.
UPDATE A: Update Valens IC program, connect a PC
to the RS232 port, and then double-click the
update file (.bat).
UPDATE B: Update compression IC program, the
upgrade method is the same as the above UPDATE
A.
②
Power LED
RED: DC power present.
③
HDMI IN (Transmitter)
Connect with HDMI source.
HDMI OUT(Receiver)
Connect with HDMI display.
④
3-pin Terminal Block
If one is connected with control device (e.g. PC), and
the other should be connected with the third-party
that need to be controlled.
⑤
IR IN
Work with far-end IR OUT port, connect with IR
Receiver (with carrier) to collect IR signal to control
far-end display device from local.
⑥
IR OUT
Work with far-end IR IN port, connect with IR Emitter
to send IR signal to control input source device from
remote.
⑦
HDBT
OUT(Transmitter)
Connect to the HDBT IN socket on Receiver via
CAT5e/6a cable.
HDBT IN (Receiver)
Connect to the HDBT OUT socket on Transmitter
CAT5e/6a cable.
⑧
DC 12V Power Port
Support bi-directional PoC, either ports should be
connected with 12V DC 2A power adaptor.
CTRL
UPDATE B UPDATE A
DC 12V
Tx Rx HDMIOUT
HDBT IN
IROUT
IRIN
12345678

User Manual
PT-HDBT-200
3
Specification
PT-HDBT-200-TX Transmitter
Input
HDMI IN
Output
HDBT OUT
Control Ports
IR IN, IR OUT, RS232
PT-HDBT-200-RX Receiver
Input
HDBT IN
Output
HDMI OUT
Control Ports
IR IN, IR OUT, RS232
General
Transmission Mode &
Distance
HDBaseT; 1080p ≤ 70m; 4K×2K ≤ 40m
Resolution
Up to 4K×2K@60Hz 4:4:4
Bandwidth
18Gbps
HDMI Standard
HDMI2.0 & HDCP2.2
Power Consumption
14W (max)
Operation Temperature
0 ~ +40℃
Storage Temperature
-10 ~ +50℃
Relative Humidity
0% ~ 90%
External Power Supply
Input: 100VAC~240VAC, 50/60Hz; Output: 12VDC 2A
Dimension (W*H*D)
115mm x 16 mm x 84mm
Net Weight (g)
Transmitter: 150g; Receiver: 153g

User Manual
PT-HDBT-200
4
System Diagram
IR Emitter
4K Blu-Ray Laptop
TV Remote
IR Receiver
Transmitter Receiver
IR Emitter
HDTV
Blu-Ray
Remote
IR Receiver
HDMI:
IR:
RS232:
CATx:
Power:
4K 40m,1080P 70m
PoC

User Manual
PT-HDBT-200
5
After-Sales Service
If there appear some problems when running the product, please check and deal with
the problems referring to this user manual. Any transport costs are borne by the users
during the warranty.
1) Product Limited Warranty: This product will be free from defects in materials and
workmanship for two years (The purchase invoice shall prevail).
Proof of purchase in the form of a bill of sale or receipted invoice which is
evidence that the unit is within the Warranty period must be presented to obtain
warranty service.
2) What the warranty does not cover (servicing available for a fee):
Warranty expiration.
Factory applied serial number has been altered or removed from the product.
Damage, deterioration or malfunction caused by:
Normal wear and tear.
Use of supplies or parts not meeting our specifications.
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
Damage caused by force majeure.
Servicing not authorized by distributor.
Any other causes which does not relate to a product defect.
Delivery, installation or labor charges for installation or setup of the product.
3) Technical Support: For any questions or problems, contact your distributor or
reseller and tell them the respective product name and version, the detailed
failure situation as well as the formation of the cases.

User Manual
PT-HDBT-200

User Manual
PT-HDBT-200

User Manual
PT-HDBT-200
Asking for Assistance
Technical Support:
Phone: [phone] - 0
Fax: [phone]
Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
[email protected]