Pyle PSLBRP4 User manual

Bird Repellent
User Manual
PSLBRP4

Installation:
1. Unlatch battery door on back of unit and remove batterycompartment.
Install 4 xAAalkaline batteries.SEEFIGURE1
2. Put 2 screws on the wall .To place unit onto wall, push double wall mount hanging holes onto the screws.
SEE FIGURE 2. For best detection; the unit should be positioned on the wall between 4.8 -14.2 feet above
the ground.
3. Locate function switch on the front of the unit to select the Day Mode and Night Mode. SEE FIGURE3
FIGURE1 FIGURE2
FIGURE3 FIGURE4
4. Day Mold: Select the Day Mold, the unit working at the sound function only in day time. sound and flash
light will working same time in nighttime ,
Night Mold: Select the Night Mold, the unit will work in sound function only in day time and flash light
will working only in night time.
Note: If you are worried to make a noise to disturb people at night time, we suggest you select the
NightMode.FIGURE4
5. Avoid placing unit behind any large trees, wall or object

Caution:
●Continuously use theAnimal Repeller
●If storms are expected remove the unit from outdoor areas
●Turn off the unit if pets are playing around the protection area
●The unit must not to be immersed in water or any other liquid
●Do no cover PIR sensorlens
●If cleaning is required, dampen a soft cloth with mild soap water.
Refrain from using any chemical or abrasive cleaningagents as this
might damage the function of the unit.