QB Tech WiFi GSM User manual

User Manual
Enjoy Smart & Safe Life WiFi - GSM- APP
Smart Home Alarm Security System

Contents
Foreword
Features
1.Content of Package
1.1 QBTech Kit A-------------------------------------------------------------- 2
1.2 QBTech Kit B-------------------------------------------------------------- 2
1.3 QBTech Kit C-------------------------------------------------------------- 3
1.4 QBTech Kit D-------------------------------------------------------------- 3
2.Preparation before using
2.1 Introduction of Control Panel and sensors--------------------------------------- 4
2.1.1 Control Panel: Front------------------------------------------------------ 4
2.1.2 Control Panel: Back------------------------------------------------------ 4
2.2 Insert SIM card----------------------------------------------------------- 5
2.3 Turn ON System---------------------------------------------------------- 5
3.Adding users on App
3.1 Download App and Installation----------------------------------------------- 6
3.2 Adding users------------------------------------------------------------- 6
3.1.1 Adding Master---------------------------------------------------------- 6
3.1.2 Adding sub-users-------------------------------------------------------- 8
4.Introduction of APP
4.1 Emergency Call Interface--------------------------------------------------- 9
4.2 Main Interface----------------------------------------------------------- 9
4.3 Control Panel Management Interface------------------------------------------- 9
4.4 Setting Interface--------------------------------------------------------- 11
4.4.1 Changing Languages----------------------------------------------------- 11
4.4.2 Modifying Time-------------------------------------------------------- 11
4.4.3 Adding Wireless Sensors-------------------------------------------------- 11
4.4.4 Setting SMS and phone call numbers----------------------------------------- 12
4.4.5 Modifying Master Password for Control Panel---------------------------------- 13
4.4.6 Modifying Installation Place----------------------------------------------- 13
4.4.7 Changing More Settings-------------------------------------------------- 13
4.4.8 Setup Home Stay Zone--------------------------------------------------- 14
Tips：
Please read through this user manual before installation so as to operate properly.
Please keep well of the user manual for further reference.
For properly operation, please get around understanding of this manual.
4.4.9 Change Zone Name------------------------------------------------------ 14
4.4.10 How To Distinguish Detector Status----------------------------------------- 14
4.4.11 How To Check Alarm Message--------------------------------------------- 15
4.4.12 Handling APP Alarm Message and Precautions--------------------------------- 15
4.4.13 Phone Call Alarm Handling---------------------------------------------- 16

Foreword
5.Introduction of Sensors
5.1 PIR Motion Sensors----------------------------------------------------- 16
5.2 Door/Window Sensor---------------------------- ----------------------- 16
5.3 Remote Controllers----------------------------------------------------- 17
5.4 Medical Panic Button---------------------------------------------------- 17
5.5 Emergency Panic Button------------------------------------------------- 17
5.6 Water Leakage Detector------------------------------------------------- 18
5.7 Smoke Detector-------------------------------------------------------- 18
5.8 Gas Leakage Detector--------------------------------------------------- 18
5.9 IP Camera------------------------------------------------------------ 19
6.Control Alarm Panel though APP
6.1 Control Alarm Panel ARM/DISARM/STAY ARM------------------------------- 19
6.2 How to Add IP Camera and How to Control----------------------------------- 20
7.Installation Precautions
Dear users:
Thanks for selecting QBTech WiFi GSM securiy system. The system adapts WiFi and GSM dual
network to transmit alarm message. It pushes the alarm message to users' smart phone App
when alarming. Meanwhile, it’s able to send SMS and make phone calls. By using dual
network, it is more stable, safer and faster. Also users could remotely control the alarm panel
and open IP camera monitoring on site.
For more conveniently using, please follow the steps on this user manual. Please feel free to
contact us if you have any questions or problems while using, we are much pleased to be on
your service.
Features
★Adapting WiFi & GSM network, enable to be controlled by iOS and Android APP.
★Support 1 master user,99 sub-users.
★Adding sensors by scanning QR code.
★Support 4 HD IP cameras, live video communication.
★24 hours monitoring temperature and humidity, enable to preset alarm value.
★Auto detect WiFi & GSM signal status.
★24 hours detecting doors/windows closed or not.
★Low battery alert for sensors, auto detect whether sensors connected alarm panel or not.
★Monitoring AC power, failure or recovery status.
★All the operation logs can be checked on QBTech App.
★One-key SOS alarm on App, auto record 6 seconds video and push the location map to
inform family members.
★Siren prompt and SMS prompt when arm/disarm by remote controller.
★Setup siren alert time(0~254 seconds for optional).
★Delay alarm/arm/disarm functions(0~60 seconds for optional).
★Six languages and voice prompt(English,Russian,German,Spanish,French and Chinese).
★Support 99 normal sensors, 20 remote controls,8 fire alarm sensors,8 panic buttons,8
emergency buttons,4 water leakage detectors,2 wired zones.
★Support wireless strobe siren and 2 routes home appliance control switch.
GSM Mode：
★When WiFi network failure,auto switch to GSM network.
★3 SMS alarm numbers and 3 alarm call numbers.
★Support two-way communication, arm or disarm on phone keypad.
★Recorded voice for 10 seconds.
1

SOS
SOS
SOS
SOS
1. Package List
1.1 QBTech Kit A 1.3 QBTech Kit C
Alarm Panel*1
PIR Detector*1
Door Sensor*1 Remote Controller*2 Medical Button*1
Alarm Panel*1
PIR Detector*1
Door Sensor*1
Remote Controller*2 Medical Button*1
Other accessories:
Power adapter*1,alarm panel mounting bracket*1,PIR mounting bracket*1
door sensor double-sided adhesive*1,user manual*1.
Notice: The version is dual network of WiFi+GSM.
1.2 QBTech Kit B
SOS Button*1
HD IP Camera *1
Smoke Detector*1
Gas Detector*1 Water Leakage Detector*1
Others accessories:
Power adapter*2,alarm panel mounting bracket*1,motion detector mounting bracket*1,
mounting bracket*1,Door sensor double-sided adhesive*1, wearable cable*1
manual*1
Notice: The version is dual network of WiFi +GSM.
Alarm panel*1
HD IP Camera *1
PIR detector*1
SOS Button*1
Door sensor*1 Remote controller*2 Medical button*1
1.4 QBTech Kit D
Alarm Panel*1
PIR Detector*1
Door Sensor*1 Remote Controller*2 Medical Button*1
Other accessories:
2
Power adapter*2, panel mounting bracket*1, PIR sensor mounting bracket*1, mounting bracket*1,
double-sided adhesive*1,wearable cable*1,user
manual*1
Notice: The version is dual network of WiFi +GSM.
Others accessories:
Power adapter*1,alarm panel mounting bracket*1,PIR mounting bracket*1,Door sensor
double-sided adhesive*1,user manual*1.
Notice: The version is WiFi network only.
3

2.Preparation before using
2.1 Alarm Panel and Sensors
2.1.1 Control Panel:Front
2.2 Insert SIM Card
This system is WiFi & GSM intelligent security system, Once alarm occurs, the host will push alarm
message to the users via WiFi. If the WiFi network failure, the alarm panel will automatically switch to the
GSM network, sending SMS and making calls to alert users for alarming. Hence, we recommend you to
insert SIM card inside.
1.Select the appropriate SIM card.
2.SIM card is inserted into the host's SIM port.
Alarm Indicator(Red)
WiFi Signal(Blue)
Arm Indicator(Red)
2.1.2 Control Panel:Back
2.3 Plug Power & Turn On System
Record MIC Listen in MIC 1.Plug power adapter to power port.
Tamper switch
Wireless signal indicator
GSM signal indicator
Power indicator
Record button
Power port
Power switch
4
Speaker
Siren(80db)
SIM Socket
Wired zone terminal
Temperature and humidity
sensor probe terminal
WiFi Setting Button
2. Push power switch from OFF to ON for turning on the system.
Power Port
Power Switch
5

3. Adding Users Via APP
3.1 APP Download and Installation
Scan the QR code, download QBTech APP to your smart mobile system (iOS or Android
System according to your mobile phone) and install it.
QR Code
3.2 Add Users
Add QBTech App to your mobile, it allows 1 master user, 99 sub users.
3.2.1 First, add 1 user as master user, please do it as following steps.
4. Click "Householder"
7. Enter WiFi password.
8. Quick press the "WiFi
Setting Button" on the back of
the QBTech panel. (As shown in
the picture on the right.)
9. After heard "beep" sound
from the host, click “Start” on
APP to configure, also you can
see the progress bar of the
5. Make sure the WiFi network which
you want to connect QBTech panel and
the WiFi network your current mobile
phone connecting are in the same
router, if true, please click "Yes".
6. If not, please click the “settings",
then choose the correct WiFi network,
reconnect it and then click "Yes".
configuration.
1. Click to open QBTech APP
on your mobile 3. On the main interface,
click "Devices"
2.After the welcome interface, then entry into emergency call
10. Enter "6 Digit Password of
QBTech panel", and then click OK
(Note: Default password is
11. Make a personalized name
as you like for QBTech and click
“Finish”.
12. Well Done.
6
interface, click ” > “ on the right side, get into the main interface. "123456").
7

All the
Each
Also
3.2.2 Add sub users, please refer to the following pictures step by step. (Note: It can add up to 99 sub
users, the sub-user can not set the parameters of the host, but the other functions are same as admin
user.)
4. APP Interface & Features.
4.1 Emergency Call Interface
SOS emergency call function, quite suitable for
Weather forecast, real-time update the weather
for you.
the elderly and children. When he/she feel not
well or get lost, click on the "SOS" button, QBTech
APP will immediately record a small video, and
push GPS location infomation to all members in
QBTech APP.
3 latest message scrolling listed.
1.Click “Admin User” enter into
Management interface.
4. Send invite code by SMS to
the family members you want
to add them in QBTech.
2. Click "Members".
5. Open your family member’s
phone, then enter the main
interface, click "Devices"
3.Click "Invite"
6. After entering adding
users interface, click on the
"Users".
4.2 Main Interface
Weather forecast.
Check all the event records about the host.
Ÿadded devices will be listed here.
Ÿdevice will display name, using time,
temperature, humidity and installation address.
Ÿdisplays the current arm/disarm
status and whether there are contents
unreviewed.
4.3 Admin Management Interface
7. Enter the received invitation code.
8. Enter your mobile phone number.
8
9. Enter user name, for example”Jason”
10. Click "Acception".
11. Complete, Click "Finish".
Return to previous interface
WiFi connecting status
host arm/disarm status
GSM network status
Anyone at home
Enter into setting interface
Temperature / humidity data
Validity period
Backup battery status
Power connecting status
9

Door/Window
Sensor
Door/Window Open
Door/Window
Closed
Door/Window
Sensor disconnect
Door Sensor
Low Battery
PIR Motion
Sensor
Somebody In
PIR Detector
Disconnected
PIR Detector
Low Battery
Smoke Detector
Fire Alert
Smoke Detector
Disconnected
Low Battery Alert
Water Leakage
Detector
Water leakage Alert
Water Sensor
Disconnected
Low Battery Alert
Gas Detector
Gas Leakage Alert
Gas Detector
Disconnected
Emergency
Button
Emergency Call Alert
Emergency Button
Disconnected
Medical Call
Button
Medical Call Alert
Medical Call
Button Disconnected
More Detectors
Detectors Alert
Detectors Disconnected
Detectors Low Battery
IP Camera
Smart Control
Intercom
Health Monitoring
Click into members
management interface
Click into alarm
records interface
Click into Emergency
Call Interface
Delete All unread
alarm records
4.4 Setting Interface
Modify Languages
Modify Time
Adding Detectors
Setting mobile phone numbers for SMS and phone calls
Modify Admin Password
Modify Installation Address
More Settings
4.4.1 Modify languages: Support Chinese, English, Russian, French, German, Spanish. After
modified, pushing message will use that language; (Note: Command according to APP
prompts)
4.4.2 Modify System Time: Recommend users reset time for new host. (Note: Command
according to APP prompts)
4.4.3 Adding Wireless Accessories: You can add all kinds of intrusion detectors and
emergency detectors, for details refer to the following description.
Add remote controllers,20pcs.
Add emergency buttons,8pcs.
Add door/window sensors, PIR sensors etc,99pcs.
Add gas/smoke detectors, 8pcs.
Add medical call buttons, 8pcs.
Add water leakage detectors,4pcs.
Add intercom,4pcs.
How to add sensors, please
follow below examples.
10
1.Click "Wireless sensors"
into adding sensors interface
2. Adding wireless sensors
interface
11

Example:Add and delete door/window sensor
4.4.5 Modify admin password. (Note: please refer to step 4.4, according to App prompts.)
4.4.6 Modify installation address. (Note: please refer to step 4.4,according to App prompts)
4.4.7 More settings.
Items
WiFi network breakdown alert
GSM network breakdown alert
Functions
If WiFi network breakdown, host will push alert message.
If GSM network breakdown, App will push alert message.
1.Click to enter into the interface
of adding door/window sensor.
2. Click the scan detection.
3. Scan QR code on the back of the
sensors.
Door/window not closed alert
Accessories low battery alert
When arming, App will push alert message if door/window isn’t closed
properly.
If accessories in low battery, APP will push alert message.
Click here to delete all detectors.
Power breakdown alarm If power breakdown or out of power, App will push alert message.
Click here to delete sensors one by one.
Enter a personalise name
for easily recognition.
6. All the accessories are added by
scanning QR code, simple and fast.
4. Click ok,App will automatically 5. Adding successfully.
recognize the door/window sensor.
4.4.4 Set phone number for SMS message and phone call. (Note: this function are special for
GSM edition. While WiFi network is not working, it will automatically switch to GSM network.)
Arm/disarm SMS alert
Siren prompt when arm/disarm
by remote controllers
The volume of internal siren
Delay arming time (s)
Delay alarm time (s)
Delay disarm time (s)
Siren alert time (s)
Timing arm
Timing disarm
Timing stay arm
NC/NO alarm for wired zones
GSM network alarm
Temperature alarm (℃)
Someone at home reminder
When arm or disarm the panel, whether sending SMS alert.
When arm or disarm by remote controllers, whether need siren prompt.
The Siren volume can be adjusted,High/Medium/Low for optional.
The arming delay time can be chose from 0~99 seconds, default is 30s.
Delay alarm time could be chose from 0~99 seconds, default is 0s.
Delay disarm time could be chose from 0~99 seconds, default is 0s.
Siren alert time could be chose from silent or 0~254s/keep alerting.
Default is 90s.
Three group of timing arm can be setup.
Three group of timing disarm can be setup.
Three group of timing stay arm (home stay) can be setup.
The alarm mode for wired zones: NC or NO, default is NC.
GSM Alarm function could be chose from Closed/Open/Auto Change.
Temperature alarm can be set from Closed or 0~120℃,default alarm is 85℃.
Could set somebody at home reminder, the function default is closed.
12
1. Click into SMS and phone
call numbers setting interface.
2. Click to set numbers, can setup
3 SMS and 3 phone call numbers.
3. After setting phone numbers,
click “ok” to finish settings.
13

4.4.8 Setup home stay arm zones
Note:All new added sensors are in home stay arm zone, the following steps can cancel home stay arm zone.
4.4.11 Check Alarm Records
Red Icon: Unread Alarm Records
Grey Icon: NO Alarm Records
Click here can check all hosts
alarm records.
2
4
2
2 As pictures shows: There
are two unread water
leakage alarm message.
1. Enter into sensor management interface,
click the icon of home stay arm.
2. In pop up window, switch to
OFF status and confirm.
3. After setup, the sensors are not in status of
home stay. It will not be trigger to alarm
when the panel in home stay mode.
1. Click related host to get into
users management interface.
2.Click related icons to check alarm messages.
Click “Delete Alarm”to delete all the red bubbles.
4.4.9 Modify Zone Name
4.4.12 APP Alarm Handling and Some Notices
1. Intrusion detectors (Door Sensor/ PIR motion sensor/ More detectors) only can be triggered to alarm when host is in
ARM status. Other types detectors (SOS button / medical call button / fire detector) can directly trigger to alarm even in
disarm status.
2. In Home Stay ARM status, the switch of intrusion detectors needs to turn on so that can be triggered to alarm.(Default
for newly added detectors arehome stay arm detectors, user can modify the zone types, details please refer Step 4.4.8 ).
3. If sensors had been triggered to alarm, there will be a red spot on sensor management interface. Other types such as
(operating record/power failure/ temper switch) alarm message will appear in “Alarm Records”, with a red spot there.
1. Enter into sensor management
interface, chose the zone.
2.In pop up window, input new name,
for example, “Front Door Alarm”.
3.Modified successfully. After checked, the red spot will disappear. Or click “clean” to delete all red spot.
4.Different type of alarm message, APP will push different alarm music to inform users.
4.4.10 Check Sensors’ Status 5. If turn on “ when GSM network breakdown, APP push message alert” function, when the host detect there is something
wrong with the GSM network, APP will push message to alert all the users.
6.If turn on “When WiFi network breakdown, auto change to GSM network” function, when WiFi network breakdown, Host
will send SMS to the 3 preset SMS numbers for reminder.
Gate
Det ector001
Front
DoorAlarm
Detector003 Detector004
Door/window sensor disconnected
Door/window open
7. When those sensors such as door/window sensor, PIR detector, gas detector, water detector, smoke detector are
disconnected with alarm host, APP will push alert message (without SMS alert message), and in sensors management
interface the related icon will be in grey color.
8.When those sensors such as door/window sensor, PIR detector, gas detector, water detector, smoke detector are in low
battery, the APP will push low battery alert message every two hours. ( This function can be turn off), also in sensor
management interface there will be low battery icon listed.
Door/window closed
Door sensor low battery 9. Door sensor closed/open status can be checked and if door had not been closed properly when host armed, APP will
1. Click into sensor management 2.The management interface of push alert message, also in sensor management interface there will be door open/closed status icon listed.
14
interface,chose the zone. door/window sensors.
15

4.4.13 Phone Call Alarm Handling
1. When cellular network (SIM card insert) is on, the system will push message to the smart phone APP,
and also it will send text message and make calls to three preset phone numbers for alarming. When
5.3 Remote Controllers
cellular network is off, the system will only push message to APP. When choose it as “Intelligent” mode,
the system will send text message and make calls for alarming after WiFi network breakdown.
Signal Indicator
Arm
2. If you prefer cellular network as alarming mode, the system will send alarm text message to 3 preset
cell phone numbers and make calls to 3 preset phone numbers for alarming. The alert siren will stop after
answering the phone, and also it will automatically broadcasts pre-recorded voice message and alarm
message, then get into listen in mode. At this moment, you can arm the system by pressing digits “1”,
disarm press “2”, start siren press “3”, stop siren press “4”. If the calling is busy or can not get through,
the system will call the second, third phone numbers in 3 cycles.
5. Accessories
Disarm
Home Stay Arm
Panic Button
Usage:
1.Press the button, the alarm host will give related response.
5.4 SOS Medical Call Button
5.1 PIR Motion Sensor
Wearable Cable
Alarm Indicator Usage:
1.Pull the wearable cable to activate SOS alarm.
Buckle
2.Press SOS button to activate alarm.
SOS Button
Lens
Installation:
1.Open the shell, remove the insulation strip.
2.Mounting it on the wall with height at 2.20 meters.
3.To prevent false alarm, avoid facing vents, air condition, etc
places. 5.5 Panic Button
5.2 Door/Window Sensor
Usage:
1.Fixed it to a place or put it where it’s needed.
2.Press the button to trigger alarm.
Alarm Indicator
Installation:
1.Open the shell, remove the insulation strip.
2.Paste the two parts on window/door with a double sided
adhesive tape.
3.When magnet move away from transmitter for 2cm distance,
it will be triggered to alarm.
16
Transmitter Magnet
Panic Button
17

5.6 Water leakage detector
Wall
Wall
Probe
Ground Ground
LAN Socket
Buzzer
Speaker Socket WPS button
Power socket
Testing button Alarm indicator Installation
Usage:
MIC Socket TF card socket
1.Open the shell, remove the insulation strip.
2.When installed, the metal area on the probe should touch ground.
5.7 Smoke Detector
Usage:
1.Open back shell, install battery.
2. Installment: The suspended ceiling type or attracts
goes against the type installation.
3.Install it where fire easily take place.
Testing button
5.8 Gas Detector
Buzzer
Alarm indicator
Power line
6. APP Interface
6.1 Arm/Disarm/Home Stay Arm
ARM: After arming, once trigger the
sensor will activate alarm.
Home Stay Arm: Only those sensors set
to home stay armed mode will be
triggered to alarm.
Usage:
1.Mounting on the wall, plug in power adapter. Disarmed: After disarmed, all intrusion
type sensors will not alarm, only panic
2.Install it where gas leakage easily take place. Buzzer button, gas sensor, smoke detector will
be activate to alarm.
Power indicator
1. Click “Arm Status”, get into
2. Arm/Disarm
Start Siren: Press this button to start
siren.
Alarm indicator
Breakdown indicator
Testing button
“Arm/Disarm” management
interface.
management interface.
Stop Siren: Press this button, the siren
will stop ringing.
18
19

6.2 How to add IP camera
7. Cautions
1.Keep away from water.
2.Install host in hidden place with good Wifi and GSM singal.
3.Turn Off host when insert/take out the SIM card.
4.Connect power adapter well and keep good heat dissipation.
5.Enter into normal running status about 12 seconds later.
6.Check all the detectors batteries in time and charges them when power is low.
7.Donot install alarm host close to the objects with strong interference,such as TV,computer etc.
8.Regularly check the SIM card in the alarm host(Check GSM signal, balance, etc.)
1. Click into host management
interface, click “Camera” to get into
IP camera management interface.
2. In IP camera management
interface, click to add new IP
camera.
3. In pop up window,
click "Scan QR code)"
9.Inspect the alarm systems operation regularly.
10. Design for indoor use rather than outdoor.
Default password: admin
4. Scan the QR code on the
back of IP camera.
5. Automatically get number
for camera, input password
and name then confirm.
6. Adding successfully. Maximum 4 IP
cameras. Click IP camera icon get
into live monitoring.
Note:
Move your finger to adjust viewing angle.
Horizontal 355 degree, vertical 90 degrees.
20
Capture pictures
Watch pictures
7. Monitoring interface
Silent
Listen in
Two way communication.
21