Connect to Desktop for Charging
O Connect the USB 2.0 interface into desktop motherboard
t,sB port, the other Micro USB to pad.
@ Standby tED light turn on green.
' -.- - -l----
' ,/ __ _>:
'>'' -)/)
-a/' ,y'./'
/' ,'
i -- ,<',
\=_=_;"
Notes
1. Do not squeeze or collisions.
2, Do not disassemble or throw into fire or watet to avoid
causing a short circuit leakage.
3, Do not use wireless charger in severely hot, humid or
corrosive environments, to avoid circuit damage and occurs
leakage phenomenon.
4. Do not place too close with magnetic stripe or chip card 0D
card, bank cards, etc.) to avoid magnetic failure.
5. Please keep the distance at least 20cm between implantable
medical devices (pacemakert implantable cochlear, etc.) and the
wireless chargei to avoid potential interference with the
medical device.
6, To take care of the children, to ensure that they won' t play
the wireless charger as a tgy, tg avoid unnecessary accidents.
The involved images are sketch maps,the final produci
as per the material subjects.
Includes: T-200 wireless chargel 3Ocm power cable,
150cm power cable, user' s manual, warranty card.
* No power adaptel if you need, please purchase
separately.
Charging mode
i
:
:
./
@
O Make sure the charging pad indicator light turn on green,
under standby status.
@ Put wireless charging mobile phone on the pad. it will start
charging after a sound 'dii'.The charging pad will sound con-
tinuous tone with blue and gren LED light flashing when placed
on the incorrect position. Please move yolr phone a little until
the tune stop and LED light tum to blue. It shows that the phone
is already found the right charging position and start charging.
