QOLSYS IQ TEMP User manual

This is a quick guide for experienced installers only. For a detailed installation manual refer to the documentation found on
the “Documentation” tab on http://dealers.qolsys.com (login required, request access at PortalA[email protected])
STEP
1
IQ TEMP QUICK INSTALL GUIDE
CHOOSE
INSTALLATION
LOCATION
SPECIFICATIONS
SEE REVERSE FOR REMAINING STEPS
Features:
Low Temp and High Temp Warning
•Low Temp alarm: Temperature drops below 40F,
restores when temperatures rises above 45F
•High Temp alarm: Temperature rises above 100F,
restores when temperature drops below 95F
Sensor:
•Cover tamper
•Unique ID for each function
•Temperature check every 5 minutes
•Battery checked every hour
Batteries:
(2) -Panasonic CR2032
-Energizer CR2032
-Duracell DL2032
The IQ Temp is designed to alert you if temperatures drop below 40°F or rise above
100°F. This early warning may help you protect your valuables, pets and home from
extreme heat or cold in the event of a HVAC or thermostat failure.
Mounting Locations
Ideally suited for a wide range of applications including:
•Bathrooms
•Laundry Rooms
•Basements
*NOTE: Avoid areas that may retain heat, such as furnace rooms or near hot water pipes

STEP
2
STEP
3
STEP
4
STEP
5
LEARN
AS LOW
TEMP
(40°F)
Tamper sensor by opening the
case until you hear the panel
chime
Document#: IQTEMP-QG-04-15
Revision#: 5/7/15
Qolsys Product #: QS5515-840
GOT QUESTIONS?
CONTACT TECH SUPPORT
[email protected]
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
LEARN
INTO
PANEL
Touch
“Settings”
Touch
“Installation”
Touch “Security
Sensors”
Touch
“AutoLearn
Sensor”
Select “Freeze” as your sensor
type and customize settings as
desired
STEP
6B
LEARN
AS HIGH
TEMP
(100°F)
STEP
6A
Click “Add”
Remove both of
the batteries
Hold the tamper
button while you
insert the batteries
REMOVE
BATTERY
TABS
APPLY
ADHESIVE
INSTALL IN
DESIRED
LOCATION
*NOTE: Sensor Type “Freeze” (Sensor Group 52) is used for both Low Temp sensors and High Temp sensors. You can
customize the Sensor Name to differentiate which one you are learning