QTORQ BW65 User manual

BW65, BW135, BW200
BWN2, BWN10 & BH25
BREAKING WRENCHES
OPERATOR’S MANUAL
ORDER CODES: KEN-555-9000K,
KEN-555-9010K, KEN-555-9020K,
KEN-555-9030K, KEN-555-9040K
& KEN-555-5900K
·Tools can be used with confidence by
operators at any skill level, due to the
unique Breaking Technology.
·Compact slimline design. This
maximises productivity in restricted
space applications.
·These versatile tools are ideal for
a wide range of applications.
·Increased operator comfort and
productivity, from the ergonomic
design, that includes lightweight
materials and moulded handgrip.

How to use and care for your Preset Breaking
Torque Wrench
Tool Specication
Models: BW2, 10,25,65,135 & 200 (Torque Range 0.4 – 200 N.m)
Repeatability: BW 2 & 10 +/- 6% of Torque Setting
BW 25,65,135 & 200 +/- 4% of Torque Setting
ISO 6789 Class: Type 2, Class C
Calibration Period: Every 12 Months or 5000 cycles (minimum)
Mechanism: Breaking - Incorrect tightening is unlikely
EPA Compliant: BWN2 and BWN10. BWN2 & BWN10 are supplied
with 1/4” Ratchet
Safety & Maintenance
This Torque Tool is a precision instrument and should be
used for its intended purpose only
Only hold the tool using the handgrip
Always ensure that the tool is in correct alignment with
the fastener
Torque tools should be regularly calibrated and inspected
to ensure correct operation
Ensure the tool is clean and free from oil, grease and water
before use
Do not use extension bars to increase the leverage of the handle
Never dip into cleaning fluid or petroleum
☑
☑
☑
☑
☑



How to adjust your Torque Screwdriver
check setting:
Use a Torque Analyser.
To adjust the torque setting:
Use a 5 mm hexagon key to remove the end cap.
Then use the same 5mm hexagon key to turn the
torque adjuster.
To increase the torque:
Using the 5mm key provided, rotate clockwise
until the correct torque is shown consistently
on the Analyser. (10 readings)
To reduce the torque:
When adjusting, always approach the required
torque from a lower setting.
To reduce the torque, rotate the hexagonal key
anti clockwise pass your setting, then increase
torque to the required value.
To set torque:
The adjustment mechanism locks
automatically when the hexagonal key is removed.
To use Torque Wrench:
The BW Wrench is designed for use with special end fittings.
Servicing Information
Regular servicing ever y year or 5000 cycles of your Torque
Tool is important to ensure it continues to perform correctly.
-
+

KENNEDY TOOLS
Wigston, Leicester, England, LE18 2FS
www.kennedy-tools.co.uk
© The Kennedy Group Ltd. 03/18
The Environment
Always dispose of unwanted tools, accessories and
packaging materials in an environmentally friendly manner.