1280-008
4V CORDLESS MINI ROTARY TOOL KIT
4
•If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons to prevent any potential hazard.
RTR OL SFT ANNS
WARNING! Safety warnings are common for grinding, sanding, wire brushing,
polishing or abrasive cutting-o operations.
•This power tool is intended to function as a grinder, sander, wire brush, polisher or
•Operations for which the power to it was not designed to create a hazard and cost
•
tool manufacturer. Just because the accessory can be attached to your power tool, it
does not ensure safe operation.
•
apart.
•The outside diameter and the thickness of your accessory must be within the capacity
guarded or controlled.
•Threaded mounting of accessories must match the grinder spindle thread. For
•Do not use a damaged accessory. Before each use, inspect the accessory for potential
dropped, inspect for damage or install an undamaged accessory. After inspecting and
installing an accessory, position yourself and any standers away from the plane of the
Use caution as damaged accessories will normally break apart during this testing.
•
safety goggles or safety glasses. As appropriate, wear dust mask, hearing protectors,
may cause hearing loss.
•Keep bystanders a safe distance away from work area. Anyone entering the work
operation.
