
Cleaning The Filter
1. Detach the rubber holding ring “I”
off the plastic nozzle.“F”.
2. Remove the plastic nozzle “F” from
the housing.
3. Slide plastic pole “C”, attached to “A”, into plastic housing “D”.
FIF
J
J
4. Clean dirt and debris out of the filter. Make sure it is completely clean before replacing it into the
plastic housing.
5. Re-assemble the nozzle and brush “F”.
6. Re-assemble the rubber holding ring “I”.
The Gritbuster is warranted for a period of one year. Subject to the following conditions.
1.The Gritbuster is arranted to the original purchaser, from the date of purchase. Proof of purchase will be required when
making a warranty claim.
2.The warranty covers defects in material. Normal wear and tear is not covered.
3. Damage which has occurred due to misuse, been altered or tampered with in any way, will not be covered.
4. In the event of a warranty claim, the Gritbuster must be returned to Rainbow Pool Products or its nominated dealer, at
the owner’s expense. Being returned will also be at the owner’s expense.
5.This warranty does not limited any right which the purchaser of the Gritbuster may have to Australian State or Australian
referral protection legislation.
Accessories
Warranty
Brush - Suction Nozzle Suction Nozzle
Leaf Net Leaf Net Assembled onto the GritBuster
Connection Pipe