Rasor Fp861rc Mounting instructions

ED.2-02/14

english

PNEUMATIC SCISSORS

MOD. FP861RC

USE MANUAL

COMPANY

Rasor®Elettromeccanica S.r.l. was established in Milan in 1946 by Luigi Spinelli. For more

than sixty years it has been producing automatic cutting systems, cutting units for textile

applications and electric and pneumatic cutters.

Initially considered as a point of reference for cutting systems in the

textile applications, the Rasor®products are nowadays widely used in

other fields: chemical, automotive, nautical and sport sectors and in

furniture manufacturing.

Rasor®can rely on the professional continuity of three generations,

thanks to the precious support of the promoting partner, to his passion, dedication and

great experience of seventy years.

The main characteristic of Rasor®is that each working phase, starting from the manufacturing

of the product up to its packing and delivery is carried out in Rasor®premises by qualified

operators who have professionaly grown up following the spirit of the company and of its

founders. This ensures the high quality which Rasor® has always considered as essential

since the beginning of its activity.

Following the innovative spirit mentioned above, our company is constantly focused on the

improvement of the product quality, on the study and development of new materials and

technologies.

ACKNOLEDGEMENT

Dear Customer,

thank you for choosing a Rasor®Elettromeccanica S.r.l. product.

Rasor®has been a reference point in the field of cutting systems in the textile, clothing,

furniture, tailoring, sport, chemical, automotive, nautical and insulating material sectors for

years. Its production has been always synonymous with reliability attested by many of

satisfied customers.

Rasor®quality system supervises all the company activities in order to provide the Customer

with a service that meets its needs and expectations in terms of product quality, delivery

reliability and stock of finished products.

All the parts of the devices have been planned and produced to guarantee an optimum

performance. In order to keep the high quality level and the long reliabilty of the Rasor®

products, it is recommended using only original spare parts and to contact the head office

for any maintenance work.

1. GENERAL SAFETY RULES

This manual is an integral part of pneumatic scissors FP861RC and must be

carefully read before using it since it gives important indications with regards

to its safe installation, use and maintenance. Keep it with care.

Before using pneumatic scissors FP861RC, read carefully the following general

safety rules.

•PACKAGING.

After taking off the packaging make sure that the machine is intact. In case

of doubt do not use it and contact an authorized service centre. Do not leave

pieces of packaging (plastic bags, foam polystyrene, boxes, etc.) within the

reach of children or disabled persons since they are potential sources of danger.

•AVOID DANGEROUS ENVIRONMENTS.

•KEEP CHILDREN AWAY.

Unauthorized persons, in particular children, must be kept away from the

working area.

•KEEP THE WORKING AREA ALWAYS IN ORDER.

The workplace must always be kept in order and well lightened; liquids or oil

traces must not be present.

•ALWAYS USE PNEUMATIC SCISSORS FP861RC PROPERLY.

Use the scissors only to carry out the works they have been designed for; do

not use them improperly.

•OBSERVE THE USE OF THE TOOLS.

Do not cut excessively thick materials and always check blade conditions.

•AVOID ACCIDENTAL STARTINGS.

Before connecting pneumatic scissors FP861RC, make sure that everything is

installed properly.

•CLOTHING.

Do not use large clothes or accessories that might get stuck in the moving

parts.

•GOGGLES AND PROTECTIVE METAL MESH GLOVES.

Always use goggles, protective metal mesh gloves approved by Rasor®during

use and maintenance operations (according to UNI EN 388:2004 standard).

•SPARE PARTS.

During maintenance and replacement operations use only original spare parts.

Blade maintenance must be only performed by Rasor®technicians.

•INSTALLATION.

Any installation that is not in conformity with these specifications could jeopardize

your safety and cancels the warranty.

COMPANY

Rasor®Elettromeccanica S.r.l. was established in Milan in 1946 by Luigi Spinelli. For more

than sixty years it has been producing automatic cutting systems, cutting units for textile

applications and electric and pneumatic cutters.

Initially considered as a point of reference for cutting systems in the

textile applications, the Rasor®products are nowadays widely used in

other fields: chemical, automotive, nautical and sport sectors and in

furniture manufacturing.

Rasor®can rely on the professional continuity of three generations,

thanks to the precious support of the promoting partner, to his passion, dedication and

great experience of seventy years.

The main characteristic of Rasor®is that each working phase, starting from the manufacturing

of the product up to its packing and delivery is carried out in Rasor®premises by qualified

operators who have professionaly grown up following the spirit of the company and of its

founders. This ensures the high quality which Rasor® has always considered as essential

since the beginning of its activity.

Following the innovative spirit mentioned above, our company is constantly focused on the

improvement of the product quality, on the study and development of new materials and

technologies.

ACKNOLEDGEMENT

Dear Customer,

thank you for choosing a Rasor®Elettromeccanica S.r.l. product.

Rasor®has been a reference point in the field of cutting systems in the textile, clothing,

furniture, tailoring, sport, chemical, automotive, nautical and insulating material sectors for

years. Its production has been always synonymous with reliability attested by many of

satisfied customers.

Rasor®quality system supervises all the company activities in order to provide the Customer

with a service that meets its needs and expectations in terms of product quality, delivery

reliability and stock of finished products.

All the parts of the devices have been planned and produced to guarantee an optimum

performance. In order to keep the high quality level and the long reliabilty of the Rasor®

products, it is recommended using only original spare parts and to contact the head office

for any maintenance work.

1. GENERAL SAFETY RULES

This manual is an integral part of pneumatic scissors FP861RC and must be

carefully read before using it since it gives important indications with regards

to its safe installation, use and maintenance. Keep it with care.

Before using pneumatic scissors FP861RC, read carefully the following general

safety rules.

•PACKAGING.

After taking off the packaging make sure that the machine is intact. In case

of doubt do not use it and contact an authorized service centre. Do not leave

pieces of packaging (plastic bags, foam polystyrene, boxes, etc.) within the

reach of children or disabled persons since they are potential sources of danger.

•AVOID DANGEROUS ENVIRONMENTS.

•KEEP CHILDREN AWAY.

Unauthorized persons, in particular children, must be kept away from the

working area.

•KEEP THE WORKING AREA ALWAYS IN ORDER.

The workplace must always be kept in order and well lightened; liquids or oil

traces must not be present.

•ALWAYS USE PNEUMATIC SCISSORS FP861RC PROPERLY.

Use the scissors only to carry out the works they have been designed for; do

not use them improperly.

•OBSERVE THE USE OF THE TOOLS.

Do not cut excessively thick materials and always check blade conditions.

•AVOID ACCIDENTAL STARTINGS.

Before connecting pneumatic scissors FP861RC, make sure that everything is

installed properly.

•CLOTHING.

Do not use large clothes or accessories that might get stuck in the moving

parts.

•GOGGLES AND PROTECTIVE METAL MESH GLOVES.

Always use goggles, protective metal mesh gloves approved by Rasor®during

use and maintenance operations (according to UNI EN 388:2004 standard).

•SPARE PARTS.

During maintenance and replacement operations use only original spare parts.

Blade maintenance must be only performed by Rasor®technicians.

•INSTALLATION.

Any installation that is not in conformity with these specifications could jeopardize

your safety and cancels the warranty.

ALL RIGHTS ARE RESERVED ACCORDING TO THE

INTERNATIONAL COPYRIGHT CONVENTIONS,

The reproduction of any part of this manual, in any form, is forbidden without

the prior written authorization of Rasor®Elettromeccanica S.r.l.

The content of this guide can be modified without prior notice. Great care has

been taken in collecting and checking the documentation contained in this

manual to make it as complete and comprehensible as possible.

Nothing contained in this manual can be considered as a warranty, either

expressed or implied - including, not in a restrictive way, the suitability warranty

for any special purpose. Nothing contained in this manual can be interpreted as a

modification or confirmation of the terms of any purchase contract.

Rasor®Elettromeccanica S.r.l. machines have not been conceived to work in areas at risk

of explosions and at high risk of fire and they cannot cut wet or damp materials. Moreover,

they cannot work in case of rain.

In case of damage or malfunction, pnaumatic scissors FP861RC mustnot be used until the

Customer Care Technical Service has repaired them.

The original configuration of the pneumatic scissors must not be changed at all.

On receiving the machine make sure the supply corresponds to what has been ordered.

In case of non-compliance immediately inform Rasor®.

Also make sure the scissors have not been damaged during transport.

Customer Care Technical Service

WARNING

The installer and the maintenance man must know the content of this manual. Although

the main features of the machine described in this manual are not subject to change,

Rasor®Elettromeccanica S.r.l. reserves the right to modify the components, details

and accessories it deems necessary to improve the machine or to meet manufacturing

or commercial requirements at any time and without being obliged to update this

manual immediately.

Informative letter

For any information, please contact

RASOR®ELETTROMECCANICA S.r.l.

Via V. Caldesi, 6; 20161, MILANO (MI) - ITALY

Phone: +39.02.66221231; Fax: +39.02.66221293

e-mail: info@rasor-cutters.com

web: www.rasor-cutters.com

WARNING

2. TRANSPORT AND PACKING

3. PLATE DATA

Serial number

Year of production

Model

Motor

data

FP861RC

900

RC________

The pneumatic scissors are delivered in a carrying case, inside which there are various options.

The code of the ordered product and its serial number are indicated outside the package

(see picture 1). The following accessories are contained in a bag inside the package:

1) Octagonal blade (8 sides);

2) Butterfly wrench for blade nut disassembly.

3) Drift for blade disassembly;

4) Rubber hose;

5) Lubricating oil (15 ml).

The manufacturer's identification and EC STANDARD 2006/42/EC conformity plate (see picture

below) is located on the front part of the pneumatic scissors.

The plate must not be removed at all, even if the machine is resold. Always refer to

the serial number written on the plate itself when contacting the manufacturer.

Several safety warnings are printed on a card which is applied on the scissors; such warnings

must be strictly followed by everyone dealing with the machine. The company is not to

be held responsible for damage to property or accidents to people which might

occur if the above-mentioned warnings are not observed. In such a case, the

operator is the only person responsible.

READ T HE INST RUCT IO N MANUAL

USE METAL G L OVES

USE GOGGLES

SHEARING RISK

DO NOT REMOVE THE SAFETY

D E VI C ES