RBSM Anaconda-2.1 2023 User manual

PRODUCTION
USER’S MANUAL

2/ 28
Table of Contents
Parts Identification…………………………………………..……3
User Security…………………………………………………………4-6
Battery and Charging…………………………………………….7-8
Operation Steps Instruction…………………………………..9-20
The Way Of Riding…………………………………………………21
General Maintenance Remarks……………………………..22-26
Troubleshooting…………………………………………………….27
Warranty……………………………………………………………….28

3/ 28
Parts Identification

4/ 28
User Security
1. Do not operate the e-bike before reading this user manual thoroughly. The
manufacturer will not be responsible for any damage or accident due to improper
use.
2. For your safety and others, please follow the traffic regulations. These electric
bicycles are not suitable for children under thirteen and the physically challenged.
The e-bike is not recommended for competition, stunt, any aggressive or off-road
riding.
3. Do not lubricate the brakes.
4. Do not ride in water where the depth exceeds the controller, the motor or direct
flush with water to electrical components.
5. Avoid prolonged exposure to the sun or rain, and exposure to humid places or
aggressive gases may cause parts to corrode or electrical parts to brake. This can
lead to malfunctioning or accidents.
6. The electrical components are complicated in structure, so please do not
disassemble or modify these parts.
7. The performance and mileage of the unit will be varied with the battery
condition, temperature, terrain, wind speed, tire pressure, rider weight and the
maintenance, etc. To get the best mileage, we propose that :
(1). Ride for 3-5m in power mode when starting.
(2). Try to reduce frequent braking or restarts.
(3). Ride in PAS mode while on uneven road conditions, uphill or headwind.
(4). Avoid carrying people or overloading.
(5). Check the tyres before riding to ensure the correct pressure is maintained.
8. To ensure your safety, please use helmets; check brakes, tyres, handlebars and
rims before riding; increase braking distance when it is raining.

5/ 28
9. Authorized payload of the bike :100kg(for bike)+15kg(for carrier)
10. For those with child seats, cover the saddle spring in case it pinches child’s
finger.
11. Improper use could cause harm, please check the connection on frame, front
fork and suspension periodically. Every mechanical part has friction and pressure,
different materials and parts have different frictions and pressures. If mechanical
part has exceed its service life, resultant damage could hurt the user. Any crack,
scratch and change of color remind us this part is out of service life, it should be
replaced immediately.
Regular check for safety before riding
1. Check if the handlebar stem and seat post are safely inserted. Take heed of the
maximum height markings (MIN. INSERTION) on the tube.
2. Check if the brake and the power brake function are working well.
(1). Hold up the kickstand, switch to the electric mode and then turn the throttle. If
the motor does not work, then the kickstand can cut power efficiently.
(2). Open the kickstand，switch to the electric mode and then stop the brake. If
the motor does not work, then the brake can cut power efficiently.
(3). Check if any of brake shoes with excess wear should be replaced.
3. Check if the nuts on the front and rear axis are securely fixed.
4. Check if the chain elastic is proper.
5. Check pedals and other fixtures, check if rotary parts are flexible.
6. Check if the hand grip throttle functions well, and goes back into place immediately
after loosening it.
7. Check tyre pressure
●Check if tyre pressure is in accordance with what is indicated on the tyre.

6/ 28
●Check if the tyre thread is excessively worn out, if so, replace the tyre.
8. Check all electrical connections and mechanical parts are securely locked, and
check all cables, connector plugs and sockets must be dry and undamaged.
9. Make sure that you know how to operate the e-bike and know clearly the traffic
regulations.

7/ 28
Battery and Charging
Steps to charge the battery
1. Confirm that the local power supply corresponds with the requirement of the charger,
the input voltage is between 100V—240V.
2. Switch your e-bike off on the main switch on the battery case.
3. The battery can be charged on the e-bike or removed from the e-bike as shown.
4. Connect the charger plug and charging port of the battery first, and then connect the
power plug and the power source.
5. When the red light turns on the charging starts.
(1)Charge without the e-bike (2)Charge on the e-bike
Safety Charging
Care of the battery is vital to your safety and to maximize its long-term performance.
Battery fault fire or explosion hazard will occur if the instructions are not followed.
●Ensure that the charger plugs are dry and securely connected to the charger port of
battery case.

8/ 28
●Do not cover the battery or charger while charging, do not use the battery charger
near flammable articles or in unventilated places. The ambient temperature should
not exceed 40°C.
● Keep the battery away from water, to prevent shocks or shorting.
●Only use the charger provided to charge the battery.
●Do not disassemble or modify the battery.
●Do not expose the battery to fire or extreme temperatures.
●Do not allow impact or force against the battery pack.
●Pull out the power plug first and then the charger plug after charging. Connecting
the power plug and the power source for a long time while not charging is not
recommended.
●Should any abnormal conditions occur, like overheating or peculiar smells, stop
charging immediately and contact your authorized dealer for help.
●Put the battery and charger in a safe place beyond children’s touch.
● Regular Use –If you are commuting significant distances, it is advisable to recharge
the battery before the return journey.
● Occasional Use – Recharge the battery at least once a week, even if the cycle is
unused.
● Always recharge the battery after use.
●The manufacturer will not be responsible for any damage or injury due to improper
or unsafe use of the battery charger.

9/ 28
Operation Steps Instruction
LCD Display Instruction
Main material and color:
Display is mainly made by black ABS material, and the brace is made by nylon. It works
well when temperature ranges from -20℃to 60℃.
Dimension figure (mm)
About the buttons
There are four buttons: ON/OFF, SET, UP and Down.

10 / 28
There are several display modes to adapt your using habit. Information that can
display on the screen are listed in the following picture:

11 / 28
1 Battery status:
Show current electric quantity, and shine to indicate a low battery quantity.
2 Backlight:
When it is on, press the ON/OFF button to turn the backlight on, and the front light
will turn on as well, you will see a light icon.
3. USB:
Press and hold SET and UP to turn USB-Charging on, you will see a USB icon.
4 Metric/British system
To indicate speed in metric system.
5Speed display:
To show current speed in a progress bar.
6. Power display:
To show current power.
7. Speed display:
To show current speed as your units setup.
8. Statistics display:
To switch between TRIP/OED/TIME by pressing SET button.
9. Ride mode display:
Three ride modes：Power, ECO & Normal. You can change mode in setup menu

12 / 28
and change the appearance as well.
10. PAS display
Press “+” or “-” to change the level of speed and power assistance from 1-5, the
default setup is 1 when turning on.
Walk assistance (move approx. 6KM/H)：
Hold “down” for 2 seconds, this icon will show at position 9.
General setting:
Hold down the SET key for 2 seconds to enter the general setting interface. Press the
"SET" key to confirm the setting item. Tap the "+" or "-" key to select the setting item.
1.General Setup
1.1 Single mileage clearance (Y/N)

13 / 28
1.2 Backlight setting
(1: darkest, 5: brightest)
1.3 Speed limit setting (range :20KM/H~99KM/H)
1.4 Wheel diameter setting (range: 16-28 inches)
1.5 Public mile setting (KM/H or MPH)

14 / 28
1.6 Voltage setting
1.7 Riding mode setting（ECO/Normal/Power）
There are three modes, and each mode corresponds to its bound.
The interface theme skin color corresponding to each mode is shown in the following
pictures:

15 / 28
ECO:
NORMAL：
POWER：

16 / 28
2.Advanced Setup
2.1 Current limiting Settings (range: 10-18A)
2.2 Poles in motor (range: 1 or 6)

17 / 28
2.3 Start after poles setting (range: 2-6)
2.4 Handle limit 6km (Y means handle limit 6km, N means normal handle limit)
2.5 Throttle level setting (Y/N)

18 / 28
2.6 Power grade (3, 5, 6 and 9 grades can be set)
2.7 Password setting (No password by default)
2.8 Returning to the Upper-Level Menu

19 / 28
3. Information
Display the current meter information, including software version, hardware version,
and fault information.
4. Save & Exit
The Settings are automatically saved and the Settings page is displayed.
※When the electric vehicle has no operation for 5 minutes, the system will
automatically sleep.

20 / 28
Cable definition
1 Red：Battery +
2 Blue：Weak lock
3 Black：Battery-
4 Green: Communication-RECEIVE（RXD)
5 Yellow: Communication - SEND（TXD）
Error code table
The error code is corresponding with the fault definition.
Error
code
Definition
0
Normal
1
Abnormal current or MOS damage
d
2
Throttle error(Start detection)
3
M
otor no phase position
4
Hall
error
5
Brake
error(Start detection)
6
Under
voltage
7
Motor
stalling
8
C
ommunication controller receiving error
9
ommunication display receiving error