RCA IP160 User manual

Battery charge level : ok
Batteries need charging
Left soft key:
access to call list
Right soft key:
access to calendar
Navigation key:
main menu/OK key
Left: phonebook
End call
Power on/off
Accept calls
Handsfree mode
Select line
Voicemail key
Hash key:
change text input method
(upper case/lower case)
Star key:
lock/unlock keypad
Mute key:
mute/unmute
Right: volume control
Up: redial
Down: intercom
BLF key
Voicemail
Headset modeHandsfree activated
Mute
Missed calls
Display icon description
Do not disturb
Alarm onKeypad lock
Good reception quality
Bad reception quality
Ringer off
Call in progress (green)
Call on hold (red)
Call ended (red)
Off
Alternating Amber and Blue
Flashing Blue
Steady Amber
Base led description
Base not yet up or no network connection
DECT registration mode
Software upgrade
Base is connected to network or router
Call forward
Quick start guide
IP160
302

Attended transfer:
•Once in line with 1st caller, press 2nd Call softkey, then select the type of call and press .
•Dial the second telephone number or select handset.
•When the call is answered, select Transfer from call options list to complete the transfer.
Blind transfer:
•Once in line with 1st caller, press Transfer softkey.
•Dial the destination telephone number and press Transfer soft key.
Call transfer
Language selection
•Press .
•Highlight a record.
•Press to make the call, you may select the line by long pressing .
Redial
•Press , select Services DND.
•Select the line for which you want to set DND feature.
•Select Activate and press .
Do not Disturb
•Press to access voicemail.
Voicemail
Access phonebook :
•Press .
•Select the Directory type.
•Select a contact and press Options soft key to select an operation.
Add new entry :
•Press .
•Select the Directory type.
•• Select Options and press Add soft key to add a new entry.
•Enter first name, last name and numbers.
•Press Save soft key.
Phonebook
•Pre-dialing: enter the phone number and press .
•Direct dialing: press . Enter the phone number.
•Handsfree: enter the phone number and press twice.
•Headset: connect the headset to the phone, enter phone number and press .
Note: to place a call from a specific line, make a long press on , select the desired line and press .
Making a call
•Handset mode: press .
•Headset mode: press .
•Handsfree mode: press twice.
Accepting a call
•Select Hold with navigator and press .
•To retrieve the call, select Unhold with navigator and press .
Note: with more than one active call, select call with Switch softkey .
Putting a call on hold
•Once in line with 1st caller, press 2nd Call softkey, then select the type of call and press .
•Dial 2nd party number or select handset and press .
Note: you may be asked to select the line to use for the second call.
3-party conference
•Press to open main menu. Select Services Call Forward.
•Select the line for which you want to set call forward.
•Then select the type of call forward.
•Set the status to enabled/disabled, fill in destination number and press .
Call forward
Paging and Intercom
•To locate your handsets, press the paging key on the base. Press again to cancel.
•To make an internal call to another handset, press key, select the desired handset from the list and press .
OR
•Go to Menu Voicemail to check number of messages. Press Call softkey to retrieve your messages.
•Press to open main menu. Select Settings Language.
•Select the desired language and press .
Extension dialing
•Dial the 3-digit extension and press .
Handset to handset transfer :
•Once in line with 1st caller, press 2nd Call soft key, then select Intercom.
Select the handset to transfer the call to and press Transfer.
•