RCA RLED1930A User manual

RLED1930A
19

TV Base Stand assemble
17
17
17
18
19
18
30
31
33
3.2. Audio/Video Source Selection
3.1. Initial Installation
3.3. DTV Mode Operations
SETTINGS
PC Mode
Initial Setup
4.1.Customizing the PICTUERE Settings
4.2.Customizing the Audio Settings
4.3.Customizing theTIME Settings
4.4.Customizing the SETUP Settings
4.5.Customizing the Patental Settings
4.6.Customizing the TV Settings
20
21
24
27

VIDEO
HDMI1 VGA PCAUDIO Y RF
Pb PrSERVICEDCIN 12V
TV Base Stand assemble
3.Mounting on the wall
This unit is VESA-complian,and is designed to be wall-mounted
with a VESA-compliant 3"x3"(75mmx75mm)mounting kit designde
for flat-panel TVs(not supplied).Mount this unit according to the
instructions included in the monting kit. Length of screw should
not exceed 8 mm
NOTE
Remove the base stand before mounting the unit on the wall.
Four mounting holes
(size M4 screw)
3"
3"
VIDEO
HDMI1 VGA PCAUDIO YRF
Pb Pr
SERVICE
DCIN 12V
VIDEO
HDMI1 VGA PC AUDIO Y RF
Pb Pr
SERVICEDCIN 12V

HDMI VGA PC AUDIO YRF
Pb Pr
VIDEO
(For Service)
VIDEO
VGA PCAUDIO Y RF
Pb Pr
SERVICEDCIN 12V USB
(ForService)

ASPECTSelectsthescreensize
UniversalRemote Code:08F7
(Universal Rmote Control is not included)
sound from speakers

adaptor
HDMI VGA PC AUDIO YRF
Pb Pr
HDMI VGA PC AUDIO YRF
Pb Pr
VIDEO
VIDEO
(For Service)
(For Service)

Note:Coaxial output
VIDEO
HDMI VGA PC AUDIO YRF
Pb Pr
HDMI VGA PC AUDIO YRF
Pb Pr
HDMI VGA PC AUDIO YRF
Pb Pr
(For Service)
(For Service)
(For Service)

17 18
3.1. Initial Installation
The first time the unit is turned on or anytime the system is restored to
the defaulted settings, the Initial Installation wizard will be displayed on the
screen.
Conect the antenna cable to the RF connector at the connections panel
and follow the steps displayed on the screen to set up the system basic
settings (Language, Cable, etc.) and start an auto search of TV channels.
Turn on the TV by pressing the POWER button on TV
or on the remote control, press SOURCE and use the
direction buttons /to select the desired source
depending on the equipment you have connected (AV,
HDMI, VGA) or choose TV to enter these mode.
Use CH+ or CH- buttons to tune the desired channel, or enter the channel
number directly using the numeric keypad. Press OK to display on screen the
list of TV and radio channels (press the /buttons to sort by group and
show only the DTV, the analog TV channels, Radio channels, etc.).
Use MTS button to select the audio language broadcasting, CC button to
show or hide subtitles on screen and FAV button to see a list of your favorite
channels.
3.2. Audio/Video Sou rce Selection
3.3. DTT Mode Operations
3. Initial Setup Customizing the PICTURE
4. SETTINGS
4.1.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LCD TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the PICTURE.
3. Use the Ÿ/źbu ons to highlight an individual PICTURE ,usetheŻ/Źto
change the se and press the MENU to exit the menu.
The PICTURE menu includes the following :
Picture Mode
Contrast Control the diīerence between the brightness and darkest regions of the
picture.
Brightness Control the overall brightness of the picture.
Color Control the color.
Tint Controls the nt.
Sharpness Increase this se ng to see crisp edges in the picture; decrease it for so
edges.
Color Temp. Cycles among color modes: Normal, Cool.Warm,
Cycle among picture display modes: Standard, Dynamic, Mild, user.

19 20
Customizing the Audio Customizing the TIMER Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LCD TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the TIMER.
3. Use the Ÿ/źbu ons to highlight an individual TIMER ,usetheŻ/Źto
change the se and press the MENU to exit.
The TIMER menu includes the following op ons:
Sleep Timer Allow you to set up the sleep among: 5min, 10min, 15min,
30min,45min, 60min, 90min, 120min, 180min, 240min and oī.
Time Zone Allow you to set up the sleep among: PaciĮc, Alaska, Hawaii,
Eastern, Central and Mountain.
Daylight Saving Time Allow you to turn on or oīthe daylight saving
4.2. 4.3.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LCD TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the AUDIO.
3. Use the Ÿ/źbu ons to highlight an individual AUDIO ,usetheŻ/Źto
change the se and press the MENU to exit the menu.
The AUDIO menu includes the following op ons:
Sound Mode Allow you to select among: Standard, Music, Movie and User.
Bass Control the rela ve intensity of lower pitched sounds.
Treble Control the rela ve intensity of higher pitched sounds.
Balance To adjust the balance of the le and right sound track, or turn oīthe volume
of the le and right sound track.
Surround Allow you to select between Oīand On.
SPDIF Type Allow you to select between PCM and RAW.
Audio Language Allow you to select audio language among: English, French and Spanish.

21 22
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LCD TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the SETUP.
3. Use the Ÿ/źbu ons to highlight an individual SETUP ,usetheŻ/Źto
change the se and press the MENU to exit.
The TIMER menu includes the following op ons:
Menu Language Allow you to select menu language among: English, Français and Español.
Transparency Allow you to turn on or oīthe transparency
Zoom Mode Allow you to select the zoom mode among:
Normal.
CinemaWide, andZoom,
Noise Re on Allow you to select the noise re on mode among: Middle, Strong,
Advance Input PC signal Įrst, then press SOURCE bu on to select VGA mode, press Ź
bu on to conĮrm.
H-Posi on Allow you to use the Ż/Źbu ons to adjust the H Posi on.
V-Posi on Allow you to use the Ż/Źbu ons to adjust the V Posi on.
Clock Allow you to prolong the image.
Phase Allow you to adjust the de
Auto Select “Auto” and press the Źbu on, the unit will
automa adjust all items to achieve a best eīect.
Close Cap on Use the źbu on to highlight the Close n item, then press the Ź
bu on to enter into the following menu.
CC Mode Allow you to select the CC Mode among: OnOī, and CC
on Mute.
Basic Allow you to select the basic sel on among: CC1, CC2,
CC3, CC4, Text1, Text2, Text3 and Text4.
Advanced Allow you to select the advanced sel on among:
Service1, Service2, Service3, Service4, Service 5 and
Service6.
Op Use the źbu on to highlight the “Op on” item, then
press the Źbu on to enter into the following menu.
KītĞĂŬ
Customizing the SETUP Se ngs
4.4.

23 24
Use the Ÿ/źbu ons to highlight the desired item, and
use the Ż/Źbu ons to select.
XVS To turn on or oīthe XVS fun on.
Restore Default Restore all se ngs in SETUP menu to factory se ngs.
Customizing the LOCK Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LCD TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the LOCK.
3. Use the źbu on to highlight “Enter Password” item, use the numeric keys to input 4-digital
password. A er you that, the screen will display the junior menu. A er ngs, press menu
to exit.
NOTE: The factory password is 0000. The supervision password is 8899.
4-di
g
ital
p
assword
Input
The LOCK menu includes the following op ons:
Change Password Use the źbu on to select the “Change Password” item, then press the
Źbu on to enter into the following menu.
Input the new 4-digital password and input it again to conĮrm.
System Lock
Allow you to turn on or oīthe system lock.
If you turn oīthe system lock, then the following items (US, Canada, RRT
Se ng and Reset RRT) will unable to use.
4.5.

22
25 26
US Use the źbu on to highlight the “US” item, then press the Źbu nto
enter into the following menu.
TV Use the źbu on to highlight the “TV” item, then press
Źbu on to enter into the following menu.
Use the Ÿ/źbu ons to select the desired ra ng and
press the Źbu on to block or unblock ra ng.
MPAA The Movie ra ng (MPAA) is used for original movies rated
by the Mo Picture Associa on (MPAA) as broadcasted
on cable TV and not edited for television.
Use the Ÿ/źbu ons to select N/A, G, PG, PG-13, R,
NC-17 or X.
RATING DESCRIPTION
GGeneral Audiences. Movie is appropriate for
all ages.
PG Parental Guidance Suggested. May contain
material not suited for younger viewers
PG-13 Contains content that may not be
appropriate for viewers under the age of 13.
RRestricted. Contains adult content, no one
under 17 admi d without parent.
NC-17 No one 17 and under admi
XAdults only.
Canada Use theźbu on to highlight the “Canada” item, then press Źbu on to
enter into the following menu.
Canada Eng Use the Ż/Źbu ons to select among: E, C, C8+, G,
PG, 14+ and 18+.
Canada Fre Use the Ż/Źbu ons to select among: E, G, 8ans+,
13ans+, 16ans+ and 18ans+.
RRT Se ng
Reset RRT Allow you to reset the RRT se ng.

27 28
Customizing the CHANNEL Se ngs
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LCD TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the CHANNEL.
3. Use the Ÿ/źbu ons to highlight an individual CHANNEL , use the Ż/Źto
change the se and press the MENU to exit.
The CHANNEL menu includes the following :
Air/Cable
Allows you to select antenna between Air and Cable.
If you select “Cable”, the following items (Favorite, Show/Hide, Channel
NO., Channel Label and DTV Signal) are unable to use.
Auto Scan Use the źbu on to highlight the “Auto Scan” item, then press Źbu on
to enter into the following menu.
If you select “Air” as input signal in Antenna item, you can press the Ź
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
If you select “Cable” as input signal in Antenna item, allows you to select
Cable System among: Auto, STD, IRC and HRC.
Use the źbu on to highlight the “Start to Scan”, then press the Ź
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
Favorite
Allow you t add these channels which you desired as the favorite
channels. Use the Ÿ/źbu ons to highlight the “Favorite” item, then
press the Źbu on to enter into the following menu.
Use the Ÿ/źbu ons to highlight the desired item, then press OK
bu on to add or remove the highlighted channel as favorite.
Show/Hide
Allow you to show or hide the channels.
Use the Ÿ/źbu ons to highlight the “Show/Hide” item, then press the
Źbu on to enter into the following menu.
4.6.

922
Use the Ÿ/źbu ons to highlight the desired item, then press OK
bu on to show or hide the highlighted channel.
Channel No. Display the number of current channel.
Channel Label Display the lable of current channel.
DTV Signal Display the quality of current DTV signal.
5. PC Mode
Se ng up your PC so ware (based on Windows XP)
The Windows display-se ngs for a typical computer are shown below. But the actual screen on
your PC will probably be diīerent, depending upon your par cular version of Windows and your
par cular video card. But even if your actual screen looks diīerent, the same, basic set-up
informa on will apply in almost all cases.
1. First, click on “Control Panel” on the Windows start menu.
2. When the control panel window appears, click on “Appearance and Themes” and a display
dialog-box will appear.
3. When the control panel window appears, click on “Display” and a display dialog-box will
appear.
4. Navigate to the “Se ng” tab on the display dialog-box. The correct size se ng (res
Op 1360×768.
If a ver cal-frequency on exists on your display se ngs dialog box, the correct value is “60Hz”.
Otherwise, just click “Enter” and exit the dialog box.
Res n Horizontal
Frequency (KHz) Frequency (Hz) Standard Mode
720x400 31.47 70 DOS
640x480 37.9 60 VGA
800x600 37.9 60 SVGA
1024x768 48.4 60 XVGA
1366x768 64 60 SXVGA

TV
TV
TV
6

and
RLED1930A
1366 x 768
36W
12V/3A
USB(For service)