reedinstruments
www com
6
Dew Point/Wet Bulb/Ambient Temperature Operations
When rst turned on the meter will display the ambient temperature. To
display the dew point (DP) temperature, press the button. Press the
button again to switch to wet bulb (WB) temperature. Pressing the
button a third time returns the meter to ambient temperature. The
display indicates when dew point and wet bulb temperature are selected.
MAX/MIN Operation
Pressing the button places the meter in the MAX/MIN mode. Under
this mode the maximum value and minimum values are kept in memory
and updated with every new data reading. Pressing the button once
will display the MAX indicator and the maximum value on the display.
Pressing the button again will display the MIN indicator and the
minimum value on the display. Pressing the button again causes the
MAX and MIN indicators to blink together. This means that the meter is
now taking a new data reading and is displaying the present temperature
and humidity on the LCD screen. The meter is now logging a new MAX/
MIN reading to be displayed. When the meter is in the MAX/MIN mode,
the °C/°F buttons are disabled. To exit the MAX/MIN mode press and hold
button for two seconds.
Auto Power Off
By default the meter is set to auto power off mode. The meter will power
itself off if left inactive for 30 minutes. To disable the auto power off fea-
ture, rst turn the meter off. Press and hold the button and then turn
the meter back on. The auto power off symbol will disappear indicating
that auto power off has been disabled.
Backlight On/Off
The LCD backlight can be switched on or off by pressing the button.
Low Battery Indication
When the battery voltage is low, the symbol will show on the LCD
indicating that the battery needs to be replaced.