Remii 102745-XT Owner's manual

INSTALLATIONANDOPERATIONINSTRUCTIONS FOR
102745-XT
102755-XT
102765-XT
SAFETY INFORMATION
WARNING
If theinformationintheseinstructionsare
not followed exactly,afireorexplosion
mayresult causingpropertydamage,
personalinjuryorlossoflife.
Do not storeoruse gasolineorotherflammablevapors
and liquidsinthevicinity ofthisorany otherappliance.
INSTALLER:LEAVETHIS MANUALWITH THE APPLIANCE.
CONSUMER:RETAINTHISMANUALFOR FUTURE REFERENCE.

2
TABLE OF CONTENTS
Pleasereadandcarefullyfollowalloftheinstructionfoundinthis manual.Pleasepayspecial
attentiontothesafetyinstructionsprovided inthismanual.Theinstructionsincludedhere will assure
thatyouhavemanyyearsofdependableand enjoyableservicefromyourRemii product.
IMPORTANTINSTRUCTIONS....................................................................................................................................3
UNPACKING ANDTESTINGAPPLIANCE...............................................................................................................4
GROUNDINGAPPLIANCE.........................................................................................................................................4
LOCATINGTHEFIREPLACE.....................................................................................................................................4
102745-XT.....................................................................................................................................................................5
102755-XT.....................................................................................................................................................................6
102765-XT .....................................................................................................................................................................7
INSTALLATION..........................................................................................................................................................11
SAFETYDRILLSCREWAREA..................................................................................................................................8
FOR BATHROOMUSE................................................................................................................................................9
HARD-WIRE INSTALLATION....................................................................................................................................8
MEDIAOPTIONS.......................................................................................................................................................16
OPERATION................................................................................................................................................................18
INSTALLING WALLTHERMOSTAT........................................................................................................................20
REPLACEMENTPARTS............................................................................................................................................21
EXPLODEDVIEW......................................................................................................................................................22
TROUBLESHOOTING..............................................................................................................................................23
SERVICE HISTORY....................................................................................................................................................24
WARRANTY...............................................................................................................................................................25
OUTDOORINSTALLATIONS .........................................................................................................................................10

3
IMPORTANT INSTRUCTIONS
Read all instructionsbeforeinstallingorusingthisheater.
2. Keepcombustiblematerials, suchas furniture,pillows, bedding, papers, clothesandcurtainsat
least 3feetfromthefront oftheheater;keepthemawayfromsidesandrear as well.
3. Alwaysunplugheaterwhenit snot in use.
4. Donotoperatethefireplaceifithasadamagedcordorplug,afterit hasmalfunctioned,orifthe
unithasbeendroppedordamaged in anyway.
5. Neverplacetheheaterwhereit mayfall into abathtuborotherwatercontainers.
6. Donotrun thecordundercarpeting.Donotcoverthecordwiththrowrugs, runnersoranything
else.Arrangethecordawayfromtrafficareas whereit couldnotbetripped over.
7. To disconnecttheheater,turnthecontrolsto"OFF" beforeremovingtheplugfromtheoutlet.
8. Donotinsertorallowforeignobjectstoenteranyventilationorexhaustopening,as thismay
causeanelectricshock,fireordamagetotheheater.
9. To prevent apossiblefire,donotblockair intakesin anymanner.
10. Aheaterhashotand arcingorsparkingpartsinside.Donotuseitinareaswheregasoline,paint
orflammableliquidsareusedorstored.
11. Usethisheateronlyas describedinthismanual.Anyotherusenot recommendedbythe
manufacturermaycausefire,electricshockorinjurytopersons.
12. Avoidtheuseofanextensioncordbecausetheextension cordmayoverheat andcauseafire.
13. Alwaysuseproperlygroundedfused andpolarized outlets.
14. Alwaysusegroundfault protection whereitis requiredbyelectrical codes.
15. Alwaysdisconnectthepowerbeforeperforminganycleaning,maintenanceorrelocationofthe
heater.
16. To prevent apossiblefire,donotburn wood orothermaterials inthis heater.
17. Topreventelectricshockorfire,alwaysuseacertifiedelectrician,shouldnewcircuitsor
outletsberequired.
Whentransportingorstoringtheheater,keepit in adryplace,freefromexcessivevibration.
1.
18.

4
UNPACKINGANDTESTINGAPPLIANCE
Carefullyremovetheappliancefromthebox. Priortoinstallingtheappliance,testtomakesurethe
applianceoperatesproperlybypluggingthepowersupplycordintoaconvenientlylocated120Volt
groundedoutlet.
GROUNDINGAPPLIANCE
This applianceis foruseon 120Volts.Thecordhasaplugasshownin(A). Anadapterasshownin(C)
is availableforconnectingthree-bladegroundingtypeplugstotwo-slotreceptacles.Thegreen
groundinglugextendingfromtheadaptermustbeconnectedtoapermanentground suchasa
properlygroundedoutletbox. Theadaptershouldnotbeusedifathree-slotgroundedreceptacleis
available.
To disconnectappliance,turn controls to off,then removeplugfromoutlet.
LOCATINGTHEFIREPLACE
Planwhere tolocateandframethefireplace.This will savetimeandmoneylaterwhenyouinstall
thefireplace.Beforeinstallationconsiderthefollowing:
1. Where thefireplaceis locatedmust allowforwallandceilingclearances(see INSTALLATION)
2. Consideralocationwhere thefireplacescreenwill notbeexposedtodirectsunlight from
windowsordoors.
3. A15 ampere,120 Volt,60 Hz branchcircuit with properground mustbeavailableatthelocation.
Preferablyadedicatedbranchcircuitshouldbeprovidedtoavoidcircuitbreakerstotripoffuses
toblow.

5
102745-XT
Description Built-inAppliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 43 5/8”or110.8 cm
ApplianceHeight 29 1/2”or75 cm
ApplianceDepth 12 5/8”or32.2 cm
Gross Weight 94.6lbsor43kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 45”30“or
104.3cm 76.2cm
BTU 4800
This appliancehasbeentestedin
accordancewith theULStandard2021
forfixedandlocationdedicatedelectric
roomappliancesintheUnitedStatesand
Canada.Ifyouneedassistanceduring
installation,pleasecontactyourlocal
dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewith localcodes.Inthe
absenceoflocalcodes,usethecurrent
CSAC22.1 CanadianElectricalCodein
CanadaortheANSI/NFPA70National
Electrical CodeintheUnitedStates.

6
102755-XT
ModelNumber Built-in Appliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 53 5/8”or136.2 cm
ApplianceHeight 29 1/2”or75 cm
ApplianceDepth 12 5/8”or32.2 cm
Gross Weight 110lbsor50kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 55”30“or
139.5 cm 76.2cm
BTU 4800
This appliancehasbeentestedin
accordancewith theULStandard2021
forfixedandlocationdedicatedelectric
roomappliancesintheUnitedStatesand
Canada.Ifyouneedassistanceduring
installation,pleasecontactyourlocal
dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewith localcodes.Inthe
absenceoflocalcodes,usethecurrent
CSAC22.1 CanadianElectricalCodein
CanadaortheANSI/NFPA70National
Electrical CodeintheUnitedStates.

7
102765-XT
Description Built-inAppliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 63 5/8”or148.5cm
ApplianceHeight 29 1/2”or75 cm
ApplianceDepth 12 5/8”or32.2 cm
Gross Weight 127.6lbsor58kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWall OpeningSize 65”30“or
165.1cm 76.2 cm
BTU 4800
This appliancehasbeentestedin
accordancewith theULStandard2021
forfixedandlocationdedicatedelectric
roomappliancesintheUnitedStatesand
Canada.Ifyouneedassistanceduring
installation,pleasecontactyourlocal
dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewith localcodes.Inthe
absenceoflocalcodes,usethecurrent
CSAC22.1 CanadianElectricalCodein
CanadaortheANSI/NFPA70National
Electrical CodeintheUnitedStates.

SAFETYDRILL SCREWAREA
Thereis asafetydrillscrewareaasshow below.
Pleasemakesurethat thefixscrewsare inthis area.
Themanualcontrolpadposition
Safetydrill screwarea
(Darkarea)
HARD-WIRE INSTALLATION
Turnofftheappliancecompletelyand let coolbeforeservicing.Onlyaqualifiedserviceperson
should serviceandrepairthiselectricappliance.
If itis necessarytohardwirethisappliance,aqualifiedelectricianmustremovethecordconnection,
and wiretheappliancedirectlyto thehouseholdwiring.
This appliancemustbeelectricallyconnectedandgroundedinaccordancewith localcodes,ifhard
wired.Intheabsenceoflocal codes, usethecurrentCSA C22.1CANADIANELECTRICAL CODEin
CanadaorthecurrentANSI/NFPA70 NATIONAL ELECTRICAL CODEintheUnited States.
1. Removethecoverplatefromtheleftsideoftheappliancebyremovingthetwoscrews, as
shownbelow.Unscrewand removepowercord.
8

2. Attachthewiringtothejunctionblock.Pleasemakesurethelivewiregoesintothe “L”,the
neutral wireinto “N”and thegroundwireinto “G”.
3. Puttheplatebackandscrew back.
FOR BATHROOM USE
9
If this unit is installed in a bathroom it must be protected by a GIF receptacle or circuit. If receptacle is
used it must be readily accessible.
To prevent electric shock, please be aware that this unit is an electrical appliance that is NOT watertight
and must be installed as to prevent water from entering unit. This must be installed away from shows,
tubs, etc. Never locate fireplace where it may fall into a bathtub or other water container.
All wiring connections to line power shall be in accordance with local building code requirements.
Inquires about local codes and regulations must be done prior to installation.

For All TRU VIEW, SYMMETRY, PANORAMA, TRADITIONAL models
Our TRU VIEW,PANORAMA, SYMMETRY and TRADITIONAL electric fireplaces are suitable for
outdoor areas protected from direct water impingement. In addition to maintaining the listed mantel and
combustibles clearances, a rain protection overhang factor of 1/2 shall be constructed to the front and to
each side of the installed appliance. See illustration below. All wiring connections to line power shall be in
accordance with local building code requirements.
The overhang (A) must extend at least 1/2 the roof-line height (B).
Height is measured from the base of the replace.
For example: if the roof-line (B) is 8’ above the base of the replace,
the overhang (A) must be at least 4’.
AM-OUTDOOR-INSTALL Feb 2020
OUTDOOR INSTALLATIONS
4 INSTALLATION CONFIGURATIONS
For all TRU-VIEW-XL, BI-DEEP, & BI-SLIM Models
Side of
Fireplace
OUTDOOR INSTALLATIONS
AB
The overhang (A) must extend at least 1/2 the roof-line height (B).
Height is measured from the base of the fireplace.
For example: if the roof-line (B) is 8’ above the base of the fireplace,
the overhang (A) must be at least 4’.
TRU-VIEW-XL, BI-DEEP & BI-SLIM electric fireplaces are suitable for installa�on in outdoor areas
protected from direct water impingement. In addi�on to maintaining the listed mantel and combus�bles
clearances, a rain protec�on overhang factor of 1/2 shall be constructed to the front and to each side of
the installed appliance. See illustra�on below. All wiring connec�ons to line power shall be in accordance
with local building code requirements.

11
INSTALLATION
Theroughwall openingsizeofthefireplace:
W(＂) D(＂) H(＂)
102745-XT 45 12 1/2 30
102755-XT 55 12 1/2 30
102765-XT 65 12 1/2 30
1. Takeouttheunit fromthebox.Pleasedo thepre-testbeforeyouinstall the fireplace. Pull
outtheoptionaltrim fromtheunit as shows below.
optional trim
Important note: The optional surround is not firmly attached and can be removed from the unit by
simply pulling it off. It is recommended that two people remove the surround.
The 102745-XT, 102755-XT and 102765-XT models are designed to be built-in. These units allow
for the finishing material (drywall, stone, tile, etc) to be built right down to the glass edge. However,
that application is not always desirable or available so the surround could be used as an alternate
finish option.

2. Removetheframingplates fromtheunit
framing plate
3. Re-fixtheframingplates to theunit as thepicture shows
framing plate
12

4. Bend up theframingplates.
5. Puttheunit into theopening.
13

6. Drivethemountingscrews into theframingplates on theunit and thewall studs.
7. After checkingthatthefireplace operatesproperly,cover theglass panelwith
protectiveplasticbagand install plywood or drywall.
Fireplace
14
framing plate
IMPORTANT NOTE: IF YOU WANT TO USE THE SUPPLIED SURROUND the
thickness of the wall finish can only be 1”.

8. Decoratetheplywood or drywall with glazed tile, wallpaper, etc.
Fireplace
9. Putback thetrim thatyou veremoved fromtheunit atSTEP1.
trim
15

16
MediaOptions

Canyon brown
Ocean blue
FIRE GLASS MEDIA-LOG INSTALLATION
1. Take off the front clear glass. There is a bracket that holds the front glass as shows below.
Unscrew the screw to take off the bracket. Turn around the bracket and insert it into the gap to
hook and pull out the glass.
The 102745-XT, 102755-XT and 102765-XT are shipped with two mixture media shows below: the
Canyon brown and Ocean blue. Consumers may purchase optional decorative media if they choose.
See dealer for more details.

17
2. Install the fire glass media. Pour the fire glass media into the try. Feel free to use any
combination of fire glass media that you find most appealing.
3. Put back the front glass after you finish the fire glass decoration.


18
OPERATION
Thefireplacecanbeoperatedeitherbytheswitcheslocatedontheleft bottomofthefireplaceunit
orbysuppliedremotecontrol.
Plugthefireplaceintoa15 Amp wall socket.
MANUAL OPERATION
1. ThemainpowerON/OFFswitchinpositionO,thefireplaceis OFF.
2. WhenmainpowerON/OFF switchis at position I,thefireplaceis readyto use.
3. Press the buttonrepeatedlytosettheheatertodesiredheatsetting.Theheaterindicator
LED will glowwhichshowsthecurrent heatersettings.
a) RED 1500WHEAT OUTPUT
b) BLUE750WHEAT OUTPUT
c) PURPLEAUTOMODE
AUTO MODE
Underthis modetheheaterwill automaticallyturnONathighheatsetting1500Wheatoutputwhen
theroomtemperature dropsbelow22 (72℉). Whentheroomtemperatureis between
22-25 (72-77℉)theheateroutput will switchtolowheatsetting750W.Whentheroom
temperature goesabove25 (77℉)theheaterwill beturnedoff andthecyclewill continue.The
LED indicatorwill bePURPLEincolourunderthis mode.
4. Flameeffect:Press thebuttonmarked toadjusttheflamebrightness.Theflamebrightness
will cyclethrough –Low-Medium-High-OFF.
5. Moodlight effect:Press thebuttonmarked to changethemoodlight colour.
NOTE: IfoperatedattheLowheatsetting,thefireplacewill notprovideasmuchheatoutputasin
theHighheatsetting,howeverthelowsettingwill notrequireasmuchelectrical powertooperate.
Toavoidoverloadingacircuit,donotplugthefireplaceintoacircuitthatalreadyhasother
appliancesworking.When thefireplaceis not in useswitchoff andunplug.
SAFETYCUT-OFF
lThis applianceis fittedwith asafetycut-offwhichwill operateifthefireplaceoverheats(eg.Due
toblockedairvents). Forsafetyreasons, thefireplacewill NOT automaticallyreset.
lToresettheappliance,disconnecttheappliancefromthemainsupplyforatleast10 minutes.
Reconnectthesupplytothemainand switchontheappliance.

19
REMOTE CONTROL OPERATION
Forremotetofunctionmakesure theheaterispluggedinandmainpowerswitchlocatedonthe
bottomleft handsideis at position I.
Whenoperatingtheremotemakesureyoupointtheremotetothecentreofthefireplaceand make
sure eachtimeyoupressthebuttonthebuzzerinsidetheunitwill beeponce.Ittakessometimefor
thereceivertorespondtothetransmitter.DonotPRESS thebuttonsmorethanoncewithintwo
secondsforcorrectoperation.
Poweron button:Thepower-onbuttonattopleftcorneroftheremoteis themainON/OFF
powerbutton.This will turnoff all thefunctionsand thefireplacewill bein standbymode.
DISPLAYON/OFF button:SwitchingthefireplaceflameandtraylightON/OFF.Ithasfunctionsof
settingmemory.
DISPLAYBLUE button:Adjust the blue colorbrightness offlameandtray.
DISPLAYYELLOWbutton:Adjust theyellowcolorbrightness offlameandtray.
DISPLAYORANGE button:Adjust theorangecolorbrightness offlameandtray.
MOODLIGHTON/OFFbutton:Switchingthemood light ON/OFF.
ADJUST button:Switchingthecolorofthemoodlight.
FLASHbutton:Switchesthemood light into flashmode,this cyclesthrough all mood light colors.
HEATERON/OFF button: Switchingthe heaterON/OFF. It hasfunctionsof settingmemory.
HIGHbutton: Press the highbutton toswitchtheheatertohighheat setting1500W.
LOWbutton: Press thelowbuttontoswitchthe heatertolowheat setting750W.
TEMP. button: Press the TEMP.buttontoswitchtheheatertoAUTO mode.Underthismode
the heaterwill operateinsimilarwayasexplained aboveforthemanualoperation.

20
INSTALLINGWALL THERMOSTAT
WALL THERMOSTATWIRING DIAGRAMS
Wirethewallthermostat prior toinstallingthefireplace.
WALL THERMOSTATWIRING(24VAC)
Install Wall Thermostat per instructionsprovided withkitandperthefollowinginformation:
1. Turn off circuitbreaker.
2. Removecoverplatelocatedontheleftsideofappliance.
3. Pull thewire outandcuttheinsidethermostat.Connectthewirestothewall thermostatas
shownbelow.Followinstructionsprovidedwith wall switchkit.