Remington CI-97M1 User manual

CI-97M1
Save theSe InStructIonS
IMPortant SaFetY
InStructIonS
When using electrical appliances,
especially when children are pres-
ent, basic safety precautions should
always be followed, including the
following:
reaD aLL
InStructIonS
BeFore uSInG.
KeeP aWaY FroM
Water.
DanGer
As with most electrical appliances,
electrical parts are electrically live
even when switch is off.
To reduce the risk of death by
electric shock:
■ Always unplug this appliance from
the electrical outlet immediately
after using.
■ Do not use while bathing or in
the shower.
■ Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
■ Do not place or drop into water
or other liquid.
■ Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
■ Unplug this appliance before
cleaning it.
■ Do not place the heated unit
directly on any surface while it is
hot or plugged in. Use the stand
provided.
■ The plug on this appliance has one
blade wider than the other, it is a
polarized plug. As a safety feature,
this plug will fit in a polarized
outlet only one way. If the plug
does not fit fully in the outlet,
reverse the plug. If it still does not
fit contact a qualified electrician.
Do not attempt to defeat this safety
feature.
■ Always store this appliance and
cord in a moisture-free area.
Do not store it in temperatures
exceeding 140°F (60°C).
■ This appliance is for household
use only.
■ Do not plug or unplug this
appliance when your hands
are wet.
WarnInG
To reduce the risk of burns, fire,
electric shock or injury to persons:
■ An appliance should never be left
unattended when it is plugged in.
■ Close supervision is necessary
when this appliance is used by,
on, or near children or people with
special needs or disabilities.
■ Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by manufacturer.
■ Never operate this appliance if it
has a damaged cord or plug, if it is
not working properly, if it has been
dropped or damaged, of if it has
been dropped into water. Return
the appliance to a service center
for examination and repair.
■ Keep the cord away from the
heated surfaces. Do not wrap the
cord around the appliance.
■ Never use while sleeping.
■ Never drop or insert any object into
any of the appliance’s openings.
■ Do not use outdoors or operate
where aerosol (spray) products
are being used, or where oxygen
is being administered.
■ Do not use an extension cord.
■ This appliance is hot when in use.
Do not let eyes or bare skin touch
heated surfaces.
KeeP aWaY FroM chILDren
Product Features
Thank you for purchasing the
Remington®Curling Wand. Please
carefully read the instructions
contained in this booklet, and keep
them in a safe place for future
reference.
Key Features:
(A) Ceramic Barrel
(B) ON/OFF Button
(C) Swivel Cord
(D) On Indicator Light
(E) Locking Ring
B
C
D
Use and Care Guide
Register Your New Product Today!
By registering your new Remington®product, you will receive these important benefits:
Proof of Ownership • Product Protection • Product Registration • Special Offers
Register online at: www.RemingtonProducts.com
A
E
How to Use
How to Use
Hair should be clean, dry or nearly
dry, and free of tangles before using.
(This iron can also be used for quick
touch-ups any time.)
1. Rest the iron on its stand on a
smooth, flat surface, and plug it in.
2. Turn unit on by sliding power
switch from off to on.
To Secure Attachment to Handle
1. Before removing or attaching an
attachment, ensure that the barrel is
cool to the touch.
2. Turn unit off and unplug unit from the
outlet.
3. Ensure the locking ring is in the
unlocked position, ready to insert the
attachment.
4. Locate the pins on the on the
attachment and holes on the handle.
(DIAGRAM A)
5. Firmly push together. (DIAGRAM B)
6. Turn the locking ring counterclockwise
to secure the handle and the
attachment together, while still pressing
down on the attachment. (DIAGRAM C).
NOTE: While heating, during use
and cooling, place on flat, smooth
heat-resistant surface. Only hold
unit at the end of the handle.
A. C.B.
Please note regular use of styl-
ing products may deteriorate the
coating. Do not scratch the sur-
face, as this will deteriorate the
effectiveness of the coating.
Optional Attachments
1” Conical
1” Extra Long
Unlock Lock
Styling Brush
3/4” Curling Iron
Elliptical

Cleaning
■ To clean the unit, be sure the unit
is cool and unplugged. Wipe the
handle and barrel with a damp
cloth. No other maintenance is
necessary.
■ Do not attempt to repair the
appliance yourself.
Note: This appliance has no user
serviceable parts.
Storage
Unplug the unit whenever it is not
in use. Allow it to cool, then store it
out of reach of children in a safe, dry
location.
Never wrap the cord around the
appliance, since this will cause the
cord to wear prematurely and break,
thus voiding warranty. Handle the
cord carefully and avoid jerking,
twisting, or straining it, especially at
plug connections.
Maintenance
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due
to faulty material or workmanship for a two-year period from the original date
of consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product and sales receipt with your name,
address and day time phone number to: Remington Returns Center, 507 Stokely
Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance of
this product. If the product should become defective within the warranty period, we will
replace it free of charge. Please call 800-736-4648.
SPECTRUM BRANDS SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. Some states do not allow the exclusion or
limitation of incidental, special, or consequential damages.
T22-0001424
120VAC 60Hz
Questions or comments: Call 800-736-4648 or visit
RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® Registered Trademark of Spectrum Brands, Inc. (SBI).
© 2014 SBI 4/14 10367-00
Made in China.
Warranty Spectrum Brands Money-Back Offer
If within 30 days after you have purchased your Remington®branded product, you are not
satisfied and would like a refund, return it with the sales slip indicating purchase price
and date of purchase to the retailer from whom it was purchased. Spectrum Brands will
reimburse all retailers who accept the product within 30 days from the date of purchase. If
you have any questions concerning the money-back guarantee, please call 800-736-4648.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the US or
800-268-0425 in Canada.
**Terms and conditions apply.
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remingtonand postmarked no later
than 60 days after purchase of the Remington product:
a. The Remington product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
*Applies to US and Canadian customers’ returns only.
TEST A SMALL SECTION OF HAIR BEFORE USING; THEN ADJUST TEMPERATURE
DEPENDING ON HAIR TYPE.
Clippless Styling
1. Put heat protective glove on the hand you will use to wrap your hair around the
wand with.
2. Section hair. For tighter curls use thinner section. For looser curls use thicker
sections.
3. With your gloved hand take sectioned hair and wrap around the wand; wrapping
ends last.
4. Keep hair around wand by holding the very ends with your gloved fingertips.
5. For added lift and volume, begin wrapping hair over the widest part of the barrel.
Clipped Styling
1. Start by dividing hair into sections not more than 1 inch deep and 2 inches wide.
2. Keep the section smooth by brushing or combing through it while holding the
ends taut with the other hand.
3. Taking one section at a time, place the ends of hair over the barrel with the
clamp open. Then close the clamp, making sure that the ends extend just a tiny
bit beyond the clamp.
4. Grasp the safety tip with the other hand, and it will be easy to roll hair.
5. Keep the section of hair taut as you wind it around the hot barrel. Wind the curl
toward the scalp as far as you wish to go without touching scalp with the hot
barrel.
6. Hold the curl in place for up to 20 seconds for tight curls or if hair is hard to curl.
Hold for less time if hair is easy to curl, or if you want loose curls or just waves.
7.
When ready to release curl, unwind about half a turn (for longer hair, unwind a
bit more) and push down on the clamp release lever to open the clamp. Now,
gently withdraw the barrel from the center of curl. Allow curl to cool, and try not to
disturb curls while proceeding in the same manner around whole head.
8. When completely finished, and all curls have cooled thoroughly, gently brush and
comb hair into the style desired.
For a Flip, the clamp should be under and the barrel over the section of hair at
the start of the curl.
For a Curl, the clamp should be over and the barrel under the section of hair at
the start of the curl.
For Volume and Body, roll hair loosely around the barrel. Allow hair to cool
slightly before brushing.