Renesas GreenPAK SLG47115V User manual

Quick Start Guide
SLG47115V GreenPAK DIP Adapter
R12QS0053EU0100 Rev.1.00
May 12, 2022
Page 1
©2022 Renesas Electronics
This user guide is intended to familiarize new users with the SLG47115V GreenPAK DIP Adapter. It consists of
the description of the board, lists its features, shows top and bottom views, as well as the board schematic.
Contents
1. Description..................................................................................................................................................... 1
2. Features.......................................................................................................................................................... 1
3. Top View......................................................................................................................................................... 2
4. Bottom View................................................................................................................................................... 2
5. Board Schematic ........................................................................................................................................... 3
6. Revision History ............................................................................................................................................ 3
1. Description
The SLG47115 DIP Adapter is a small PCB that lets you adapt STQFN packages into a DIP footprint. This board
can speed up your design prototyping and testing. This small board 0.90x2.20 inch uses 20 pins DIP footprint
with 0.3 inch width. You can also use this adapter for prototyping by making STQFN package compatible with
solder free breadboards.
2. Features
■Low cost
■Simplifies prototyping of SMT IC’s
■Four high voltage high current output GPOs
■Current up to 2 A per HV GPO
■Current sensing resistors
■Variable current sensing configurations
■Optional VDD LED indicator
■Decoupling capacitor included
■Screw terminals for high voltage and high current lines
■Optional I2C pull-up resistors

SLG47115V GreenPAK DIP Adapter Quick Start Guide
R12QS0053EU0100 Rev.1.00
May 12, 2022
Page 2
Note 1: All sizes in millimeters (mm).
3. Top View
PIN1 (VDD)
Pins
PIN3 (GPI)
PIN2 (GPIO0)
Not connected
Not connected
Not connected
Not connected
PIN15 (GPIO2/SCL)
PIN16 (GPIO3/SDA)
PIN19 (GPIO5)
Not connected
Not connected
PIN17 (GPIO4)
PIN14 (GPIO1)
Not connected
Not connected
Not connected
Not connected
PIN20 (GPIO6)
GND
Pins
LED current limit resistor (optional) VDD LED indicator (optional)
Chip package type
Chip package number
SENSE to GND (R4 BYPASS) jumper
PIN11 &PIN6 (VDD2_B)
HV_GND
HV_GND
HV_GND
PIN9 & PIN10 (HV_GPO1)
PIN9 & PIN10 (HV_GPO1)
HV_GND
VDD2 decoupling capacitor (C2-C4)
HVPAK chip
VDD Chip decoupling capacitor
PinsPins
PIN11 &PIN6 (VDD2_B)
SHUNT RESISTOR FOR VDD2 CIRCUIT
4. Bottom View
Not connected
Pins
Not connected
PIN17 (GPIO4)
PIN14 (GPIO1)
Not connected
Not connected
Not connected
Not connected
PIN20 (GPIO6)
GND
PIN1 (VDD)
Pins
PIN3 (GPI)
PIN2 (GPIO0)
Not connected
Not connected
Not connected
Not connected
PIN15 (GPIO2/SCL)
PIN16 (GPIO3/SDA)
PIN19 (GPIO5)
HV_GND
PIN9 & PIN10 (HV_GPO1)
PIN9 & PIN10 (HV_GPO1)
HV_GND
Pins
PIN11 &PIN6 (VDD2_B)
HV_GND
HV_GND
Pins
PIN11 &PIN6 (VDD2_B)

SLG47115V GreenPAK DIP Adapter Quick Start Guide
R12QS0053EU0100 Rev.1.00
May 12, 2022
Page 3
5. Board Schematic
6. Revision History
Revision
Date
Description
1.00
May 12, 2022
Initial release.

Corporate Headquarters
TOYOSU FORESIA, 3-2-24 Toyosu,
Koto-ku, Tokyo 135-0061, Japan
www.renesas.com
Contact Information
For further information on a product, technology, the most
up-to-date version of a document, or your nearest sales
office, please visit:
www.renesas.com/contact/
Trademarks
Renesas and the Renesas logo are trademarks of Renesas
Electronics Corporation. All trademarks and registered
trademarks are the property of their respective owners.
IMPORTANT NOTICE AND DISCLAIMER
RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL
SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING
REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND
OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible
for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3)
ensuring your application meets applicable standards, and any other safety, security, or other requirements. These
resources are subject to change without notice. Renesas grants you permission to use these resources only for
development of an application that uses Renesas products. Other reproduction or use of these resources is strictly
prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property.
Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims,
damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject
to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources
expands or otherwise alters any applicable warranties or warranty disclaimers for these products.
(Rev.1.0 Mar 2020)
© 2021 Renesas Electronics Corporation. All rights reserved.