ResMed AirFit P10 User manual

A quieter mask to t your patients
ResMed’s AirFit™P10 nasal pillows mask is part of ResMed’s AirFit range— the right fit for your
patients. This is our quietest mask yet, offering the reliability and performance of the Swift™FX
in a design that’s 50% quieter and around 50% lighter.
ResMed.com
Quieter
QuietAir™woven-mesh vent is whisper
quiet at just 21.4 dBA
3, for minimal
patient and partner disturbance.
Lighter
It’s almost 50% lighter than our most
popular pillows mask and designed to
provide a comfortable night’s sleep.
Easy to t
QuickFit™elastic headgear automatically
adjusts to each patient’s head. It can
be fitted in under 30 seconds.2

More than 40 minutes
of extra sleep...
In a recent ResMed study
1with 21 current CPAP users from Australia,
we found that on average, patients slept more than 40 minutes longer per
night using the ResMed AirFit P10 compared to the Swift FX mask.
For more information on the study see: ResMed.com/AirFitP10
Whitepaper ‘Assessment of a new nasal pillows mask in patients receiving CPAP’.
Key-clip nasal pillows
offer effortless assembly, with
colour coding for easy sizing and
left/right orientation to ensure
patients fit the mask properly.
QuietAir™woven-mesh venting
quietly diffuses exhaled air and is
barely noticeable to patients and
their bed partners. It’s ResMed’s
quietest mask at just 21.4 dBA.3
Innovative flexi-tube
is ultra-light and flexible
yet highly durable, offering
patients freedom of movement
without compromising seal.
The AirFit P10 for Her
is designed especially for
women, offering a smaller
size for female facial contours,
finished in stylish tones
and highlights.
Dual-wall technology
with trampoline action seals
on contact, dispersing air
gently to the nose.
QuickFit™elastic headgear
with unique split-strap
design provides stability and
adjustability with minimal
facial contact.
AirFit P10 features and benets
40
mins

QuickFit
elastic headgear
62935 Standard size
QuickFit for Her
elastic headgear
62936 Small size
Pillows
62930 (XS) 62932 (M) 62933 (L)62931 (S)
XS Extra Small
SSmall
MMedium
LLarge
Note: For more details, refer to the AirFit P10 User Guide.
AirFit P10 components
3-part
simplicity
makes the AirFit P10 mask
around 50% lighter than the
leading nasal pillows mask.
Product codes
Europe 1 Europe 2 Europe 3
AirFit P10 - complete system*. 62901 62902 62903
AirFit P10 for Her - complete system** 62911 62912 62913
Europe 1: English (UK), French, German and Italian (Switzerland)
Europe 2: English, Danish, Estonian, Finnish, Norwegian and Swedish
Europe 3: English, Czech, Dutch (Belgium), French (Belgium), German (Belgium), Greek, Hungarian,
Italian, Polish, LMSXS Portuguese, Russian, Slovak, Spanish and Turkish
* S, M and L pillows are included with the mask and standard size headgear (blue).
** XS, S and M pillows are included with the mask and small size headgear (pink).
Frame
62938

• If adjustment is needed, spread the upper and lower straps apart to loosen, or draw them closer together to tighten.
• Pull the headgear over your head by holding
the lower strap.
3
• Stretch the lower strap around the back
of your head.
• The top strap should sit comfortably on
top of your head.
2
• Hold the pillows at your nose, ensuring that
the pillow size indicator is on the bottom
and you can see the left (L) and right (R)
orientation indicators.
1
Adjustment
• Finally, connect the end of the mask’s tube
into your device’s air tubing.
• Turn on your device — your mask is now
ready to use. A light breeze should be felt
through the vent.
5
• Move the mask away from your face, and then place it back again.
• Ensure the nasal pillows fit securely into your nostrils with both pillows positioned upright.
4
Note: For complete user instructions, refer to the AirFit P10 User Guide.
Fitting guide for AirFit P10
1 ResMed Study FECS3. ResMed data (pressure, leak, average daily usage, AHI) collected from a sample size of 21 participants.
2 ResMed Study FECS3. 90% of participants fitted the mask comfortably in less than 30 seconds.
3Declared dual numbered noise emission values (with uncertainty 3dBA) in accordance with ISO 4871.
ResMed Ltd
1 Elizabeth Macarthur Drive,
Bella Vista, NSW 2153 Australia
DISTRIBUTED BY
ResMed (UK) Ltd, 96 Jubilee Avenue,
Milton Park, Abingdon, Oxfordshire, OX14 4RW UK
AirFit, QuickFit, QuietAir and Swift are trademarks of ResMed Ltd. Swift is registered in the U.S. Patent
and Trademark Office. Product availability may vary across regions. Specifications may change without
notice. © 2014 ResMed Ltd. 1016674/3 2014-03