ResMed AirSense 10 Guide

My sleep therapy:
ResMed
equipment start guide
AirSense™10 AutoSet™machine
AirFit™N20 mask

BResMed equipment start guide
Getting started with your
new equipment
Watch the video
For an overview on how to set up
your ResMed equipment, visit
ResMed.com/RemoteSetUp

1ResMed.com/RemoteSetUp
Treating your sleep apnoea plays such
an important role in improving your
energy1and health,
1and you’re in good
hands with your ResMed AirSense 10
machine and AirFit N20 mask.
This setup guide will walk you through how to use your new equipment.
Please read the user guide included in your package carefully and refer to it for
detailed information about product use and related precautions.

2ResMed equipment start guide
What’s inside AB
C
Shipping box
ADevice travel bag
BStart guide
CAirFit N20 nasal mask
Device travel bag
DAirSense 10 machine
EHumidAir™humidifier tub*
FAir tubing
GPower transformer and power cord
HUser guide
My sleep therapy:
ResMed CPAP
equipment start guide
AirSense™10 AutoSet™CPAP machine
AirFit™N20 mask
*only if you have been prescribed a humidifier with your machine.

3ResMed.com/RemoteSetUp
ED
G
F
H
AirSense™ 10 AUTOSE T
AUTOSET FOR H ER
ELITE
CPAP
User Guide
English
I
Francais
I
Español
I
Português
MAX

4ResMed equipment start guide
Setting up your
AirSense 10
machine
Let’s begin by setting up your
AirSense 10 machine.
AInsert the power cord into the back
of your machine using the round plug.
BConnect the power cord to the power
supply, and plug the other end into
an electrical outlet.
CYour machine will power on and
display the Home screen.
AB
C
STEP 1
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Sleep Report
My Options
Home

5ResMed.com/RemoteSetUp
AB
C
STEP 2
Attaching your
air tubing
AYou can find your air tubing in the
zippered pocket of your AirSense10
travel bag.
BConnect your air tubing by holding
the cuff and lining it up with
the connector port on the back
of the machine.
CBe sure to line up the connector
pin on the tubing cuff to the
corresponding slot on the
connector port.
DPush until it clicks into place.
ClimateLineAir
connected
Complete
My Options
ClimateLineAir
connected
Complete
My Options
Note: The air tubing included
with your machine may not
include the connector port
shown in images B and C.
If that’s the case, simply
connect the air tubing firmly
to the air outlet located on
the back of the machine.

6ResMed equipment start guide
AB
C
STEP 3
Preparing your
HumidAir
humidier tub*
ASnap open the lid of the water tub.
BFill with water to the maximum water
mark on the tub.
CClose the lid until it snaps shut.
Gently push the water tub into the
side of the machine until you feel it
lock into place.
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
*If your machine does not have a humidifier, please do not put water in to the machine. Water should not go inside the
black outer housing.

7ResMed.com/RemoteSetUp
Navigating
your AirSense 10
machine
AThe START/STOP button located on
the top of your machine is used to
begin and end therapy.
BThe dial on the front is used to adjust
comfort settings and access your
sleep therapy data. Turn it to navigate
the menu, and press it to confirm
your choice.
CThe HOME button sends you back to
the Home screen, regardless of where
you are in the menus.
Note: All of your other machine settings
are pre-set to your personal therapy needs per
your healthcare provider. You will not need
to make any additional setting adjustments.
AB
C
STEP 4
START STOP
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Sleep Report
My Options
Home
START STOP
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Sleep Report
My Options
Home
START STOP
Sleep Report
My Options
Home
Sleep Report
My Options
Home
Sleep Report
My Options
Home

8ResMed equipment start guide
AMask system
BElbow
CFitting template
DAdditional cushions*
Unboxing and
assembling
your mask
STEP 5
AB
D*
C
* If provided by your healthcare provider. Additional cushions not for resale.