ReSound V30 User manual

OPERATING
INSTRUCTIONS
ReSound V
Model V30

2
Congratulations on the purchase of your new fully-
digital GN ReSound hearing instrument!
GN ReSound’s state-of-the-art technology and the
customized set-up selected by your hearing care professional
will bring outstanding sound quality to your family, social
and professional life.
Your hearing instrument has been adjusted to your
individual hearing loss. Please familiarize yourself with the
information in this booklet. Proper understanding and use
of your new GN ReSound hearing instrument will allow
you to derive maximum hearing benefit.
ReSound V is a trademark of GN ReSound .
GN RESOUND V SERIES
IN-THE-CANAL
PERSONAL HEARING SYSTEM

3
Contents page
Your ReSound V Hearing Instrument 4-5
User Operated Controls 6
Volume Control 6
Mode Selector 7
Your ReSound V set-up 8
Stand-by Function 8
On/Off Function 8
Insertion of the Hearing Instrument 9
Removal of the Hearing Instrument 10
Changing the Battery 10
Battery Warning Information 11
Daily Maintenance 12
Cleaning the Microphone Sound Inlet 13
Changing the Sound Outlet Filter/
Cleaning the Sound Outlet 13
Telephone Use 14
Using Assistive Listening Systems 15
Repairs 15
Troubleshooting Guide 16-17
General Precautions 18
Technical Data 18
Key Word Index 19

4
Your ReSound V Hearing Instrument
1. Mode Selector
2. Battery Compartment
3. Microphone Sound Inlet
4. Air Vent
5. Sound Outlet
▲
▲
1
35
2
4

5
7. Manufacturer
8. Year of Manufacture
9. Model
10. Serial Number
▲
▲
9
8
7
4
5
10

6
User Operated Controls
Volume Control
The volume control in your ReSound V instrument is fully
automatic, so there is no need to bother with adjustments.
Your instrument has been programmed to vary its amplifica-
tion according to your needs. However you have the option
of decreasing the volume by selecting the Comfort Mode, a
standard feature for more comfort in noisy environments
with less demanding speech understanding needs (in the car,
at the mall).

7
Mode Selector
In ReSound V you have a basic programme and 3 different
modes. The first mode is the Comfort Mode, and if you select
the telecoil option you have additionally the T and MT modes.
If your hearing care professional has programmed the telecoil
option with the specific mode into your instrument, you can
select the modes simply by depressing the push button. You will
then hear one or more “beeps”, indicating which mode you
have selected. Your hearing instrument will switch modes as
follows:
Example with 3 modes:
Basic programme →Comfort Mode,
Comfort Mode →MT mode,
MT mode →Tmode,
Tmode →Basic programme
Example with 2 modes:
Basic programme →ComfortMode,
Comfort Mode →T or MT mode,
Tor MT mode →Basic programme
Example with 1 mode:
Basic programme →Comfort Mode,
Comfort Mode →Basic programme
You can always return to the basic programme by turning your
instrument off and then on again (see “On/Off Function”) or
byplacing it in stand-bymode and then returning to its nor-
mal function mode (see “Stand-by Function”on the next page).
▲

8
Your ReSound V set-up
Basic
Comfort Programme ( )
Telecoil ( ) Microphone/Telecoil ( )
Telecoil ( )
Stand-by Function
To put the instrument into stand-by mode, hold down the
mode selector for 5 seconds. You will hear a series of beeps,
and the device is now in stand-by mode. Before returning
to functional mode, you will need to wait approximately 5
seconds. After waiting, press the mode selector once. Please
note that the instrument is using a small amount of power
when in stand-by mode.
On/Off Function
Your ReSound V ITC (In-The-Canal)
is equipped with an on/off
switch integrated into
the battery compart-
ment. When the battery
compartment is fully closed,
the instrument is turned on in its
functional mode and the basic
programme will be activated. Toturn the instrument off,
open the batterycompartment with your fingernail.
Whenever you are not wearing the instrument, remember to
turn it off to reduce batteryconsumption.
▲

9
Insertion of the Hearing Instrument
To insert the hearing instrument into your ear:
1. Grip the instrument with your thumb and forefinger,
either above and below or on the sides (as shown) with
the programme selector on top.
2. Place the sound outlet portion into your ear canal.
3. Insert the hearing instrument carefully with a slight
“corkscrew” motion.
By experimenting, you may find a method that is easier
for you. When properly inserted, the instrument should fit
comfortably and tightly in your ear. It is important that the
custom shell fits correctly into your ear. If your hearing
instrument irritates your ear in any way and prevents you
from wearing your hearing instrument, please contact your
hearing care professional to have the custom shell modified.
You should never attempt to modify the shape of the custom
shell yourself.
▲

10
Removal of the Hearing Instrument
To remove the hearing instrument:
1. Gently massage behind your earlobe with an upward and
downward motion to dislodge the instrument.
2. Place your thumb on the bottom and forefinger on the
top of the instrument, and carefully remove the instru-
ment out of your ear canal with a slight “corkscrew”
motion.
Byexperimenting, you may find a method that is easier for
you. Consult your hearing care professional if you have
difficulty removing the hearing instrument.
Changing the Battery
The batteries for the hearing instrument are quite small, and
it may cause difficulty seeing the battery and battery door
markings. A magnifying glass and good lighting may be
helpful.
▲
“+”
“+”

11
When the battery voltage/power decreases to a certain level,
the instrument will stop amplifying and emit a soft beeping
signal. This signal will continue for about one minute and
then the instrument will be automatically switched off.
Therefore, it is recommended that you keep a spare battery
on hand.
Open the battery compartment completely using your fin-
gernail, as described earlier. After removing the old battery,
insert the new one with the “+” (flat) side facing the “+” on
the battery door. It should fit in like a puzzle piece. The bat-
tery door should close very easily. Never use force to close the
door as this may damage your hearing instrument.
Always use a size 312 Zinc-Air battery. Please note that if the
battery is weak, the hearing instrument performance will be
reduced. Removing the battery when you are not wearing it
will help prevent corrosion of the battery contacts and
reduce battery consumption.
Battery Warning Information
Batteries contain dangerous substances and should be
disposed of carefully in the interest of your safety and for
the environment.
•Do NOT attempt to recharge batteries which are not
specifically designated rechargeable as they may leak or
explode.
•Do NOT attempt to dispose of batteries by burning
them.
•Keep batteries away from small children and pets.
•Do NOT place batteries in your mouth.
If swallowed, see a physician immediately.

12
Daily Maintenance
Keep your hearing instrument clean and dry. Wipe the case
with a soft cloth or tissue after use to removegrease or
moisture. If the instrument has been exposed to high
humidity or perspiration, enclose it in a sealed container
together with a drying agent (dessicator) overnight.
Consult your hearing care professional concerning which
drying agent to use.
To avoid the need for unwarranted repairs:
•Never immerse the instrument in water or other liquids
since this may cause permanent damage to the circuitry.
•Protect your hearing instrument from rough handling,
and avoid dropping it on hard surfaces or floors.
•Do not leave the instrument in or near direct heat or sun-
light since excessive heat can damage the instrument or
deform the casing.

13
Cleaning the Microphone Sound Inlet
For proper function of the microphone, it is important to clean
the sound inlet to remove dust or other sound disturbing
debris. The soft brush, provided with your hearing instrument,
can be used for this purpose. Your hearing care professional can
instruct you on how to properly use this tool.
Changing the Sound Outlet Filter/
Cleaning the Sound Outlet
Your ReSound V hearing instrument may be equipped with
asound outlet filter (consult your hearing care professional).
This filter is located at the end of the sound outlet and
prevents debris from getting into the hearing instrument.
If the hearing instrument seems to have lost power and
changing the battery does not help, the filter may be
blocked, and needs to be changed. Your hearing care
professional can instruct you on how to change the filter.
Ifyour hearing instrument does not have a filter, ear wax
and/or other debris may collect in the sound channel. The
cleaning loop,provided with your hearing instrument, can
easily be used to removethis material. Your hearing care
professional can instruct you on how to properly use this
tool. When using this tool, be careful not to damage or pull
the tubing found at the opening of the sound outlet. Ifthis
is pulled out, the hearing instrument may need to be
returned for repair.

14
Telephone Use
Your hearing instrument may be equipped with an induction
coil (telecoil) which picks up magnetic emanations from a
hearing instrument compatible telephone. Your hearing care
professional can set-up your ReSound V hearing instrument
to take advantage of the telecoil. By selecting the telecoil
mode, the hearing instrument will only pick up the sounds
coming from the telephone.
When using the telecoil mode, the receiver of the telephone
should be held as shown in the drawing. You may need to
move the handset around slightly to find the best reception.
Not all telephones are compatible with the induction coil in
the hearing instrument, which will therefore not function in
the telecoil mode. In that case stay in the basic programme.
Using the telephone while wearing your hearing instrument
may require some practice.

15
Using Assistive Listening (Tele-loop)
Systems
Many gathering places are equipped with assistive listening
(Tele-loop) systems, e.g. in schools, theaters and houses of
worship. To take advantage of a Tele-loop system, select the
telecoil mode. When the telecoil mode has been selected,
you will be able to hear a clean sound signal via the Tele-loop
system. If the instrument goes dead in the telecoil mode, this
may be because the loop system is not operating. If a school,
theater or house of worship does not have a Tele-loop
system, try and sit as close as possible to the front. If you
prefer to be able to hear your family sitting next to you, you
can select the MT mode (microphone/telecoil) instead of
just having the telecoil mode activated.
Repairs
If your GN ReSound hearing instrument malfunctions, it
must be repaired by a qualified technician. Do not attempt
to open the case of the hearing instrument since this would
invalidate the warranty. If your GN ReSound hearing instru-
ment requires service, please contact your hearing care pro-
fessional for assistance.

16
TROUBLESHOOTING GUIDE
SYMPTOM CAUSE
Dead • Not turned on
• Battery low/dead
• Battery improperly inserted
• Blocked sound outlet
• Blocked cerumen filter
Not loud • Battery low
enough • Instrument loose
• Blocked sound outlet
• Blocked cerumen filter
• Change in hearing
• Excessive ear wax
• Volume set too low
Whistles • Instrument improperly inserted
• Poorly fitting instrument
Not clear,• Batterylow
Distorted • Poorly fitting instrument

17
POSSIBLE REMEDY
• Turn on
• Replace battery
• Insert battery properly
• Clean sound outlet
• Change cerumen filter
• Replace battery
• Reinsert carefully
• Clean sound outlet
• Change cerumen filter
• Consult your hearing care professional
• Consult your physician
• Consult your hearing care professional
• Remove and reinsert
• Consult your hearing careprofessional
• Replace battery
• Consult your hearing careprofessional

18
General Precautions
• Consult a physician if you find a foreign object in your
ear canal, if you experience skin irritation or if excessive
ear wax accumulates with the use of the hearing instru-
ment.
• Different types of radiation, e.g. from NMR or CT
scanners, may damage the hearing instrument.
Therefore, do not wear the hearing instrument during
these or other corresponding scanning procedures. Other
types of radiation (burglary alarms, room surveillance
systems, radio equipment, mobile telephones, etc)
contain less energy and will not damage the hearing
instrument. They could however momentarily affect the
sound quality or create strange sounds from the hearing
instruments.
• Warning: Do not wear the hearing instrument in mines
or other explosiveareas, unless those areas are certified
for hearing instrument use.
Technical Data
Maximum output
(2cc coupler / IEC 60118-7) 109 dB SPL (Typical)

19
Key Word Index
Assistive listening (Tele-loop) systems 15
Battery change 10-11
Battery compartment 4,10-11
ReSound V set-up 8
Cerumen/earwax 12-13
Cleaning the instrument 12-13
Insertion 9
Low battery warnings 11
Maintenance 12-13
Programme selector 7
On/off function 8
Removal 10
Sound outlet 4,13
Stand-by mode 8
Telecoil use 7,14,15
Telephone use 14
Troubleshooting guide 16-17
User operated controls 6,7
Volume control 6
Any issues relating to the EU Medical Device Directive
93/42/EEC should be directed to GN ReSound A/S.
Faceplate/Electronics by: GN ReSound A/S

15771300-GB-06.04 Rev. A
Worldwide headquarters
GN ReSound A/S
Lautrupbjerg 7
DK-2750 Ballerup
Denmark
Tel.: [phone]
Fax: [phone]
www.gnresound-group.com
United Kingdom
GN ReSound Ltd.
1Landscape Close
Weston Business Park
Weston-on-the-Green
Oxon OX25 3SX
Tel.: [phone]
Fax: [phone]
www.gnresound.co.uk
Australia
GN ReSound Pty.Ltd.
Unit R1 Regents Park Estate
391 Park Road
Regents Park NSW 2143
Tel.: [phone]
Fax: [phone]
www.gnresound.com.au
New Zealand
GN ReSound (NZ) Ltd.
12 Parkway Drive
Mairangi Bay
Auckland
Tel.: (free) 0800 900 126
Fax: (free) 0800 007 695
www.gnresound.com.nz