ReSound Enya 67 User manual

Product: ReSound Enya
Model: 67
Serial number (R):
______________________________
Serial number (L):
______________________________
Battery size: 312
My hearing aid information
Quick guide
ReSound Enya™ 67

Program Button (A):
ACTION RESULT
SHORT push Program change
LONG push
Activate streaming
(if enabled by
professional)
Programs:
(if set up by your hearing care professional)
PROGRAM WHEN TO USE BEEPS
11
22
33
44

32
ReSound Alera®supplement— wireless BTEs
A. Program button
B. Microphones
C. Battery door
D. Right/Left indicator
D
A
B
E
Get to know your hearing aid
32
ReSound Alera®supplement— wireless BTEs
32
ReSound Alera
®
supplement— wireless BTEs
View ReSound’s hearing aid tutorial videos at youtube.com/resoundus.
E. Groove for DAI/FM boot
F. Thin tube
G. Dome
C
6
1
5
4
3
2
8/9
10
7
8/9
11
12
13
14
18.c
18.b
9
1. Program button
2. Battery compartment & On/Off switch
3. Sound outlet
4. Front microphone inlet
5. Back microphone inlet
6. Volume control (optional)
7. Direct audio input
8. Left/Right indicator (Left=Blue/Right=Red)
9. Battery lock (optional)
10. Model
11. Manufacturer
12. Serial number
13. LED indicator (optional)
14. Battery lock release (optional)
15. Earhook
16. Earmold and tubing
17. Thin Tube
18. Domes/earmold
a. Open dome
b. Tulip-Dome
c. Custom earmold
19. Sports lock (optional)
400144011-US-13.09-Rev.E.indd 9 25-09-2013 14:42:17
Open fitting
(Thin Tube and dome)
F
G

Getting Started: On/O function
ON: Insert battery & completely
close battery door (C).
Program 1 will be active.
OFF: Open the battery door (C). Use
fingertip to pull it all the way.
OFF
ON
54
ReSound Alera
®
supplement—
wireless BTEs
Flight Mode (for instruments only when paired
with accessories)
deactivated, as hearing instruments are not allowed
to transmit radio signals during flights. Flight Mode al-
lows you to suspend wireless operation while other-
wise maintaining full functionality of your hearing in-
HOW TO USE THE HEARING
INSTRUMENT
On/Off function
Your ReSound Alera hear-
ing instrument is equipped
with an on/off switch in-
tegrated into the battery
door.
• When the battery door
is fully closed, the in-
strument is turned on
and Program 1 will be
activated.
• To turn the instrument off, open the battery door.
TIP: Whenever you are not using the instrument,
remember to turn it off to reduce battery con-
sumption.
Generally, people prefer to
turn on the hearing instru-
ment after it is placed behind the ear and the dome
or earmold is inserted into the ear.
If you would like
to turn on the instrument before placing it on your ear,
your hearing healthcare professional can activate the
SmartStart™ function.
SmartStart™
SmartStart™ allows you to insert the instrument into
the ear without annoying, squealing sounds. Starting
when the battery door is closed, it delays the activa-
tion of the hearing instrument for ten seconds. During
this 10-second period you will hear a series of single
beeps.
54
ReSound Alera®supplement— wireless BTEs
Flight Mode (for instruments only when paired
with accessories)
deactivated, as hearing instruments are not allowed
to transmit radio signals during flights. Flight Mode al-
lows you to suspend wireless operation while other-
wise maintaining full functionality of your hearing in-
HOW TO USE THE HEARING
INSTRUMENT
On/Off function
Your ReSound Alera hear-
ing instrument is equipped
with an on/off switch in-
tegrated into the battery
door.
• When the battery door
is fully closed, the in-
strument is turned on
and Program 1 will be
activated.
• To turn the instrument off, open the battery door.
TIP: Whenever you are not using the instrument,
remember to turn it off to reduce battery con-
sumption.
Generally, people prefer to turn on the hearing instru-
ment after it is placed behind the ear and the dome
or earmold is inserted into the ear. If you would like
to turn on the instrument before placing it on your ear,
your hearing healthcare professional can activate the
SmartStart™ function.
SmartStart™
SmartStart™ allows you to insert the instrument into
the ear without annoying, squealing sounds. Starting
when the battery door is closed, it delays the activa-
tion of the hearing instrument for ten seconds. During
this 10-second period you will hear a series of single
beeps.
What you need to know Inserting/Replacing the Battery:
1. Open the battery
door (C)
completely
by using
your fingertip.
2. Remove protective sticker from
battery and wait 2 minutes before
inserting the
battery into the
hearing aid to
allow full activation of the battery.
3. Insert the new battery
with the positive
side (flat side) in
the correct
position, as shown.
4. Gently close the battery door. If it
doesn’t close easily, check to see
if the battery is upside down.
54
ReSound Alera
®
supplement— wireless BTEs
Flight Mode (for instruments only when paired
with accessories)
deactivated, as hearing instruments are not allowed
to transmit radio signals during flights. Flight Mode al-
lows you to suspend wireless operation while other-
wise maintaining full functionality of your hearing in-
HOW TO USE THE HEARING
INSTRUMENT
On/Off function
Your ReSound Alera hear-
ing instrument is equipped
with an on/off switch in-
tegrated into the battery
door.
• When the battery door
is fully closed, the in-
strument is turned on
and Program 1 will be
activated.
• To turn the instrument off, open the battery door.
TIP: Whenever you are not using the instrument,
remember to turn it off to reduce battery con-
sumption.
Generally, people prefer to turn on the hearing instru-
ment after it is placed behind the ear and the dome
or earmold is inserted into the ear.
If you would like
to turn on the instrument before placing it on your ear,
your hearing healthcare professional can activate the
SmartStart™ function.
SmartStart™
SmartStart™ allows you to insert the instrument into
the ear without annoying, squealing sounds. Starting
when the battery door is closed, it delays the activa-
tion of the hearing instrument for ten seconds. During
this 10-second period you will hear a series of single
beeps.

Flight mode:
Some airlines prohibit the use of
wireless hearing aids (RF
transmitters) onboard. If required by
your airline, enable flight mode:
Disable wireless operation by
opening and closing the battery door
(C) three times within ten seconds
(open-close, open-close, open-close).
Your instruments will now be in
flight mode.
The hearing aids must function in
flight mode for 10 seconds before
wireless operation can be re-enabled.
To re-enable wireless operation,
open and close the battery door one
time and wait thirty seconds before
opening the battery door again to
avoid accidentally entering flight
mode again.
Daily: Clean your hearing aid.
Keep your hearing aids dry. Clean
the hearing aids using a soft cloth
or tissue.
Weekly: Clean the thin tubes and
domes/earmold.
1. Remove thin tubes (F) from hearing
instruments before cleaning by
unscrewing them counter clockwise.
2. Wipe down thin tubes and domes (H)
with a damp cloth.
3. In order to clear the thin tube of
moisture and debris, push the black
cleaning rod through the thin tube,
beginning at the end opposite the
dome.
Regular care & maintenance

12
30
How to apply domes
It is recommended that your hearing care
professional change domes, as incorrect
dome replacement could result in injury.
ReSound standard domes
1. Push the new dome over the receiver.
2. Make sure that the new dome is
properly and securely mounted.
ReSound tulip domes
Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip
domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure
this:
1. Push the largest petal away from
the receiver tube using a finger. This
bends the petal forward.
2. Then push the largest “petal” back,
and it will be placed on top of the
smaller petal.
400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59
As needed: Change dome (H)
(if applicable)
ReSound standard domes
1. Push the new dome on to the thin
tube.
2. Make sure that the new dome is
properly and securely maintained.
ReSound tulip domes
Tulip domes consist of two “petals”.
It is important that the largest petal is
the outermost petal. To ensure this:
1. Push the largest petal away from
the thin tube using a finger.
This bends the petal forward.
2. Then push the largest“petal”
back, and it will be placed on top
of the smaller petal.
12
30
How to apply domes
It is recommended that your hearing care
professional change domes, as incorrect
dome replacement could result in injury.
ReSound standard domes
1. Push the new dome over the receiver.
2. Make sure that the new dome is
properly and securely mounted.
ReSound tulip domes
Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip
domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure
this:
1. Push the largest petal away from
the receiver tube using a finger. This
bends the petal forward.
2. Then push the largest “petal” back,
and it will be placed on top of the
smaller petal.
400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59
Connecting audio boot and
integrated FM
1. Align the tip of the audio boot
or integrated FM boot with
designated groove (F).
2. Once in place, move the boot
in the direction of the battery
compartment.
3. Gently click the boot onto the
hearing instrument.
Disconnecting audio boot and
integrated FM
1. Press and hold the button on the
front side of the audio boot. For an
FM boot, slide the latch downward
with your finger nail.
2. Gently remove the boot from the
hearing instrument.
Connecting/disconnecting
direct audio boot or Integrated FM
Direct Audio Integrated FM
1.
2.
1.
2.
3.

Beep/tone indicators
View ReSound’s hearing aid tutorial videos at youtube.com/resoundus.
BEEP/TONE INDICATION ACTION REQUIRED
Ding, ding, ding,
dong
Low battery Change battery
Ding (5 or 10) Hearing aid is starting up After dings cease, hearing
aid is turned on
Ding-ding, ding-
ding, etc.
Hearing aid is in flight mode Use in flight mode if desired,
or open-close battery door to
exit flight mode
Ripple tone Hearing aid is in
streaming mode
Use with wireless accessory
or press multi-function
button to exit streaming
mode

Troubleshooting
SYMPTOM CAUSE POSSIBLE REMEDY
No Sound Battery door not closed
Dead battery
Battery door will not close
Blocked earmold or tube
Blocked wax filter
Turn on by closing the battery door (C)
Replace battery
Insert battery properly
Clean earmold or tube (F)
Replace wax filter or consult your hearing care professional
Not loud enough Blocked earmold or dome
Change in hearing, volume too low
Excessive ear wax
Clean earmold, replace dome (G)
Consult your hearing care professional
Consult your hearing care professional
Excessive
whistling/feedback
Incorrect earmold placement
Incorrect dome placement
Excessive ear wax
If none of the above
Re-insert earmold carefully
Re-insert dome (G)
Clean guard/consult your hearing care professional
Consult your hearing care professional
Wireless does not work Device may be in flight mode Open and close the battery compartment once. Wireless
operation will reactivate ten seconds later.
If there are any other problems not mentioned in this guide, please contact ReSound or your hearing care professional.

400558011 Rev C 2016.11
400558011
ReSound Government Services
8001 E. Bloomington Freeway
Bloomington, MN 55420
1.800.392.9932
www.resound.com/veterans
For more information
Manufacturer according
to FDA
ReSound North America
8001 E. Bloomington Freeway
Bloomington, MN 55420
1.888.735.4327
resound.com
Manufacturer according
to Health Canada
ReSound Canada
303 Supertest Road
Toronto, Ontario M3J 2M4
1.888.737.6863
resound.com
Refer to the user guide included in
your hearing aid box.
Your hearing care professional can
be reached at:
View ReSound hearing aid tutorial
videos at youtube.com/resoundus.