Respironics Trilogy 100 Manual

Trilogy 100, Trilogy 200,
Trilogy 02 & Trilogy 202
Service & Technical Information

PAGE 1 - COPYRIGHT & WARRANTY1002735, VER. 05
TRILOGY SERVICE & TECHNICAL INFORMATION
Patents pending. Trilogy is a trademark of Respironics, Inc.
AVAPS is a trademark of Respironics, Inc.
Note: C-FlexTM is used under license.
© 2010 Respironics, Inc. and its affiliates. All rights reserved.

1002735, VER. 05PAGE 2 - COPYRIGHT & WARANTY
TRILOGY SERVICE & TECHNICAL INFORMATION
LIMITED WARRANTY
Respironics, Inc. warrants that the Trilogy 100, Trilogy 200, Trilogy O2, & Trilogy 202 systems shall be free from
defects of workmanship and materials and will perform in accordance with the product specifications for a
period of two (2) years from the date of sale by Respironics, Inc. to the dealer. If the product fails to perform in
accordance with the product specifications, Respironics, Inc. will repair or replace – at its option – the defective
material or part. Respironics, Inc. will pay customary freight charges from Respironics, Inc. to the dealer
location only. This warranty does not cover damage caused by accident, misuse, abuse, alteration, and other
defects not related to material or workmanship.
Respironics, Inc. disclaims all liability for economic loss, loss of profits, overhead, or consequential damages
which may be claimed to arise from any sale or use of this product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Accessories and replacement parts, including, but not limited to, circuits, tubing, leak devices, exhaust valves,
filters, and fuses, are not covered under this warranty. However, Respironics warrants that the Product’s
internal and detachable battery (where supplied) will be free from defects in material and workmanship, under
normal and proper use and when correctly maintained in accordance with applicable instructions, for a period
of 90 days from the date of shipment by Respironics to the original purchaser. This warranty does not apply to
batteries that are dropped, misused, altered, or otherwise damaged after they are shipped.
This warranty is given in lieu of all other express warranties. In addition, any implied warranties – including any
warranty of merchantability or fitness for the particular purpose – are limited to two years. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To exercise your rights under this warranty, contact your local authorized Respironics, Inc. dealer or contact
Respironics, Inc. at:

REVISION HISTORY - PAGE 11002735, VER. 05
TRILOGY SERVICE & TECHNICAL INFORMATION
REVISION HISTORY
CHAPTER TITLE DATE DESCRIPTION OF CHANGES
Copyright/Warranty 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Revision History 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Table of Contents 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Introduction 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Warnings & Cautions 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Specifications 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Theory of Operation 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
System Setup 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Troubleshooting 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Maintenance 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Section updated to document new maintenance
requirements.
9/7/2010 Added Performance Verification Tool.
Repair & Replacement 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
9/7/2010 Updated AC Inlet Procedure.
Repair Kits 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Testing 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
Tools and Equipment 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.

1002735, VER. 05PAGE 2 - REVISION HISTORY
TRILOGY SERVICE & TECHNICAL INFORMATION
Schematics 6/11/2010 Manual updated to include Trilogy O2& Trilogy
202 devices.
CHAPTER TITLE DATE DESCRIPTION OF CHANGES

PAGE 1 - TABLE OF CONTENTS
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
CHAPTER 1: INTRODUCTION
1.0 CHAPTER OVERVIEW ................................................................................ 1-1
1.1 TRILOGY 100 & TRILOGY 200 VENTILATORS INTENDED USE ..................... 1-1
1.2 TRILOGY O2 & TRILOGY 202 INTENDED USE ............................................ 1-1
1.3 TRILOGY 100 & TRILOGY 200 SYSTEM OVERVIEW .................................... 1-1
1.4 TRILOGY O2 & TRILOGY 202 SYSTEM OVERVIEW ..................................... 1-2
1.5 SERVICE TRAINING ................................................................................... 1-2
1.6 SERVICE/TECHNICAL SUPPORT STATEMENT .............................................. 1-2
CHAPTER 2: WARNINGS, CAUTIONS, & NOTES
2.0 CHAPTER OVERVIEW ................................................................................ 2-1
2.1 WARNINGS ............................................................................................... 2-1
2.2 CAUTIONS ................................................................................................ 2-2
2.3 NOTES ..................................................................................................... 2-2
CHAPTER 3: SPECIFICATIONS, CLASSIFICATIONS, & SYSTEM FEATURES
3.0 CHAPTER OVERVIEW ................................................................................ 3-1
3.1 ENVIRONMENTAL SPECIFICATIONS ............................................................ 3-1
3.2 TRILOGY 100 & TRILOGY 200 PHYSICAL SPECIFICATIONS ......................... 3-1
3.3 TRILOGY O2 & TRILOGY 202 PHYSICAL SPECIFICATIONS .......................... 3-1
3.4 ELECTRICAL SPECIFICATIONS ................................................................... 3-2
3.5 PRESSURE SPECIFICATIONS...................................................................... 3-2
3.6 SD CARD & SD CARD READER................................................................ 3-3
3.7 STANDARDS COMPLIANCE ........................................................................ 3-3
3.8 CONTROL ACCURACY ............................................................................... 3-4
3.9 MEASURED PATIENT PARAMETERS ........................................................... 3-5
3.10 TRILOGY 100 SPONTANEOUS BREATHING DURING POWER FAILURE CONDI-
TIONS .............................................................................................................. 3-5
3.11 TRILOGY 200, TRILOGY O2, & TRILOGY 202 SPONTANEOUS BREATHING DUR-
ING POWER FAILURE CONDITIONS.................................................................... 3-5
3.12 RESISTANCE VALUES ............................................................................. 3-5
3.13 WEEE/ROHS RECYCLING DIRECTIVES ................................................... 3-6
3.14 EMC INFORMATION ................................................................................ 3-7
3.15 FRONT PANEL FEATURES ..................................................................... 3-11
3.16 TRILOGY 100 & TRILOGY 200 SIDE PANEL FEATURES .......................... 3-13
3.17 TRILOGY 100 & TRILOGY 200 REAR PANEL FEATURES......................... 3-14
3.18 TRILOGY O2 & TRILOGY 202 SIDE PANEL FEATURES ........................... 3-15

PAGE 2 - TABLE OF CONTENTS
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
3.19 TRILOGY O2 & TRILOGY 202 REAR PANEL FEATURES ..........................3-16
3.20 POWER SOURCES .................................................................................3-16
CHAPTER 4: THEORY OF OPERATION
4.0 CHAPTER OVERVIEW ................................................................................4-1
4.1 AC/DC POWER SUPPLY ...........................................................................4-1
4.2 POWER MANAGEMENT BOARD ..................................................................4-2
4.3 SYSTEM BOARD........................................................................................4-4
4.4 CPU DAUGHTER CARD.............................................................................4-7
4.5 SENSOR BOARD ......................................................................................4-9
4.6 FRONT PANEL BOARD ............................................................................4-11
4.7 INTERFACE BOARD .................................................................................4-12
CHAPTER 5: SYSTEM SETUP
5.0 CHAPTER OVERVIEW ................................................................................5-1
5.1 KEYPAD LOCK FEATURE...........................................................................5-1
5.2 ACCESSING THE STARTUP AND MONITOR SCREENS...................................5-2
5.3 MONITOR SCREEN INDICATORS .................................................................5-4
5.4 CHANGING AND VIEWING SETTINGS IN FULL MENU ACCESS MODE ..........5-11
5.5 CHANGING THE DEVICE SETTINGS AND ALARMS ......................................5-12
5.6 ADDITIONAL SETTING SPECIFIC TO THERAPY MODES...............................5-16
5.7 VIEWING AND CHANGING OPTIONS MENU ITEMS ......................................5-25
5.8 VIEWING THE ALARM LOG.......................................................................5-29
5.9 VIEWING THE EVENT LOG .......................................................................5-30
5.10 VIEWING DEVICE INFORMATION .............................................................5-31
CHAPTER 6: TROUBLESHOOTING & ALARMS
6.0 CHAPTER OVERVIEW ................................................................................6-1
6.1 TRILOGY VENTILATOR ALARMS .................................................................6-1
6.2 AUDIBLE AND VISUAL ALARM INDICATORS ................................................6-1
6.3 AUDIO PAUSE AND ALARM RESET FEATURES............................................6-4
6.4 ALARM SUMMARY TABLE..........................................................................6-6
6.5 TROUBLESHOOTING TABLE .....................................................................6-21
6.6 DOWNLOADING TRILOGY ALARM ERROR CODE INFORMATION ..................6-25
6.7 TRILOGY ERROR CODES AND CORRECTIVE ACTIONS ...............................6-29

PAGE 3 - TABLE OF CONTENTS
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
CHAPTER 7: MAINTENANCE
7.0 CHAPTER OVERVIEW ................................................................................ 7-1
7.1 ROUTINE MAINTENANCE ........................................................................... 7-1
7.2 PREVENTIVE MAINTENANCE ...................................................................... 7-1
7.3 TRILOGY VENTILATOR MAINTENANCE RECORD.......................................... 7-9
7.4 PERFORMANCE VERIFICATION (PV) TOOL ............................................... 7-10
7.5 CHECKING THE INTERNAL BATTERY AND DETACHABLE BATTERY CYCLE
COUNTS ........................................................................................................ 7-20
7.6 INTERNAL BATTERY CONDITIONING PROCEDURE ..................................... 7-21
7.7 CLEANING AND DISINFECTION PROCEDURES ........................................... 7-22
CHAPTER 8: REPAIR & REPLACEMENT
8.0 CHAPTER OVERVIEW ................................................................................ 8-1
8.1 EXTERNAL COMPONENT REMOVAL/INSTALLATION ..................................... 8-2
8.2 FRONT/REAR/BOTTOM ENCLOSURE REMOVAL .......................................... 8-7
8.3 BOTTOM ENCLOSURE ASSEMBLY COMPONENT REMOVAL/INSTALLATION . 8-10
8.4 FRONT ENCLOSURE ASSEMBLY COMPONENT REMOVAL/INSTALLATION .... 8-26
8.5 REAR ENCLOSURE ASSEMBLY COMPONENT REMOVAL/INSTALLATION...... 8-38
8.6 FRONT/REAR/BOTTOM ENCLOSURE INSTALLATION.................................. 8-70
8.7 OXYGEN BLENDING MODULE COMPONENT REPAIR & REPLACEMENT PROCE-
DURES........................................................................................................... 8-71
8.8 PACKAGING ASSEMBLY PROCEDURE ...................................................... 8-82
CHAPTER 9: REPAIR KITS
9.0 CHAPTER OVERVIEW ................................................................................ 9-1
9.1 REPAIR KIT REFERENCE TABLE ............................................................... 9-2
9.2 POLLEN FILTER KITS ................................................................................ 9-5
9.3 REMOVABLE AIR PATH FOAM KIT ............................................................. 9-5
9.4 HANDLE KIT ............................................................................................. 9-6
9.5 BLOWER BELLOWS KIT ............................................................................ 9-6
9.6 INLET AIR PATH ASSEMBLY KIT................................................................ 9-7
9.7 CAPACITOR/BATTERY RETAINER ASSEMBLY KIT ....................................... 9-7
9.8 INTERNAL BATTERY PACK KITS ................................................................ 9-8
9.9 SPEAKER HOLD-DOWN KIT....................................................................... 9-8
9.10 SYSTEM BOARD TO ETHERNET CABLE KIT.............................................. 9-9
9.11 SYSTEM BOARD TO INTERFACE PCA CABLE KIT .................................... 9-9
9.12 CAPACITOR KIT .................................................................................... 9-10

PAGE 4 - TABLE OF CONTENTS
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
9.13 BATTERY FAN KIT ................................................................................9-10
9.14 DC POWER CONNECTOR CABLE KIT.....................................................9-11
9.15 OXYGEN CONNECTOR KIT .....................................................................9-11
9.16 AC POWER CONNECTOR CABLE KIT.....................................................9-12
9.17 PCB SUPPORT FOR SYSTEM PCA KIT ..................................................9-12
9.18 PCB SUPPORT FOR POWER MANAGEMENT PCA KIT ............................9-13
9.19 POWER CORD CLAMP KIT.....................................................................9-13
9.20 TUBING ELBOW KIT ..............................................................................9-14
9.21 SYSTEM BOARD TO LCD CABLE FERRITE KIT .......................................9-14
9.22 SYSTEM BOARD TO LCD CABLE KIT.....................................................9-15
9.23 SYSTEM BOARD TO SENSOR BOARD CABLE KIT ...................................9-15
9.24 KEYPAD KIT .........................................................................................9-16
9.25 PCB MODULE PLATE “A” KIT ..............................................................9-16
9.26 PCB MODULE PLATE “B” KIT ..............................................................9-17
9.27 BASE ENCLOSURE KITS........................................................................9-18
9.28 INTERFACE BOARD RETAINER KIT .........................................................9-20
9.29 TRANSITION TUBE LOCATOR KIT...........................................................9-21
9.30 DETACHABLE BATTERY RETAINER KIT ..................................................9-21
9.31 DETACHABLE BATTERY CONNECTOR ASSEMBLY KIT.............................9-22
9.32 STIRRING FAN KIT ................................................................................9-23
9.33 PORTING BLOCK ADAPTOR KIT.............................................................9-23
9.34 TRANSITION TUBE KIT ..........................................................................9-24
9.35 ACTIVE EXHALATION CONTROL MODULE KIT.........................................9-24
9.36 STIRRING FAN RETAINER KIT ................................................................9-25
9.37 BATTERY FAN SHIELD KIT ....................................................................9-25
9.38 OUTLET FLOW PATH THERMISTOR KIT ..................................................9-26
9.39 TEMPERATURE SENSOR O-RING KIT......................................................9-26
9.40 FLOW STRAIGHTENER KIT.....................................................................9-27
9.41 EXHAUST FAN ASSEMBLY KIT...............................................................9-27
9.42 FLOW SENSOR ASSEMBLY KITS............................................................9-28
9.43 ENCLOSURE SEAL KIT .........................................................................9-29
9.44 TRILOGY FRONT ENCLOSURE KITS........................................................9-30
9.45 REAR ENCLOSURE KITS........................................................................9-31
9.46 PCA INVERTER KIT ..............................................................................9-32
9.47 SPEAKER KIT .......................................................................................9-32
9.48 BELLOWS CLIP KIT...............................................................................9-33
9.49 MOTOR BLOWER ASSEMBLY KIT...........................................................9-34

PAGE 5 - TABLE OF CONTENTS
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
9.50 INTERFACE PCA KIT ............................................................................ 9-34
9.51 SENSOR BOARD ASSEMBLY KITS ......................................................... 9-35
9.52 FRONT PANEL/KEYPAD LED PCA KIT.................................................. 9-36
9.53 SYSTEM BOARD W/ DAUGHTER BOARD KIT........................................... 9-37
9.54 POWER MANAGEMENT PCA KIT ........................................................... 9-37
9.55 POWER SUPPLY PCA KIT..................................................................... 9-38
9.56 TRILOGY 100 TUBING KIT..................................................................... 9-38
9.57 TRILOGY HARDWARE KIT...................................................................... 9-38
9.58 LCD KIT .............................................................................................. 9-39
9.59 SD CARD KIT....................................................................................... 9-39
9.60 SHIPPING CONTAINER KITS................................................................... 9-40
9.61 STIRRING FAN FOAM KIT ...................................................................... 9-40
9.62 WARNING LABEL KITS .......................................................................... 9-41
9.63 TOP PLATE ENCLOSURE KIT................................................................. 9-44
9.64 O2 INLET O-RING KIT ........................................................................... 9-45
9.65 DC INLET O-RING KIT........................................................................... 9-45
9.66 HANDLE O-RING KIT............................................................................. 9-46
9.67 RUBBER FEET KIT ................................................................................ 9-47
9.68 PREVENTIVE MAINTENANCE LABEL KIT ................................................. 9-47
9.69 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER PCA .......................... 9-47
9.70 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER WHISPER CAP............ 9-48
9.71 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER FLOW ELEMENT ......... 9-48
9.72 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER MIXING ELEMENT ....... 9-49
9.73 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER HOUSING.................... 9-50
9.74 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER PCA SPACER ............ 9-51
9.75 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER WIRE HARNESS.......... 9-52
9.76 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER FILTER DUCT ............. 9-53
9.77 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER PURGE FAN ............... 9-54
9.78 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER LOWER MANIFOLD...... 9-54
9.79 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER PRESSURE SENSOR PORT
CLIP.............................................................................................................. 9-55
9.80 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER MANIFOLD ASSEMBLY 9-56
9.81 TRILOGY O2 & TRILOGY 202 BLENDER PLASTIC THREADED CAP.......... 9-56
9.82 TRILOGY 200, TRILOGY O2, & TRILOGY 202 TUBING KIT ...................... 9-57
9.83 TRILOGY O2 & TRILOGY 202 OXYGEN BLENDER TUBING KIT ................ 9-57
9.84 TRILOGY PORTING BLOCK ADAPTOR CAP KIT....................................... 9-57
9.85 FAA LABEL KIT ................................................................................... 9-58

PAGE 6 - TABLE OF CONTENTS
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
9.86 TRILOGY BASE SEAL KIT ......................................................................9-58
9.87 ENCLOSURE AUXILIARY COVER KIT .....................................................9-58
CHAPTER 10: TRILOGY TESTING & CALIBRATION
10.0 CHAPTER OVERVIEW ............................................................................10-1
10.1 TRILOGY 100 CHECKOUT PROCEDURE ..................................................10-1
10.2 TRILOGY 100 CHECKOUT PROCEDURE DATA SHEET ...........................10-11
10.3 TRILOGY 200 CHECKOUT PROCEDURE ................................................10-12
10.4 TRILOGY 200 CHECKOUT PROCEDURE DATA SHEET ...........................10-22
10.5 TRILOGY O2 & TRILOGY 202 CHECKOUT PROCEDURE ........................10-23
10.6 TRILOGY O2 & TRILOGY 202 CHECKOUT PROCEDURE DATA SHEET....10-34
10.7 DOWNLOADING THE TRILOGY FIELD SERVICE APPLICATION, TRILOGY TOOL-
BOX SOFTWARE, AND NATIONAL INSTRUMENTS DAQMX SOFTWARE .............10-35
10.8 PERFORMING FIRMWARE UPGRADES ...................................................10-53
10.9 USING THE TRILOGY TOOLBOX............................................................10-59
10.10 TRILOGY FIELD SERVICE APPLICATION..............................................10-66
10.11 SAFETY TEST (OPTIONAL) ..............................................................10-104
CHAPTER 11: TOOLS AND EQUIPMENT
11.0 CHAPTER OVERVIEW ............................................................................11-1
11.1 COMMON HAND TOOLS.........................................................................11-1
11.2 EQUIPMENT ..........................................................................................11-1
11.3 SUPPLIES .............................................................................................11-3
11.4 ACCEPTABLE TEST EQUIPMENT ............................................................11-4
CHAPTER 12: SCHEMATICS
12.0 SCHEMATICS STATEMENT .....................................................................12-1

PAGE 1-1
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
CHAPTER 1: INTRODUCTION
1.0 CHAPTER OVERVIEW
This chapter provides an introduction for the Trilogy Ventilator as well as contact and service training
information.
1.1 TRILOGY 100 & TRILOGY 200 VENTILATORS INTENDED USE
The Trilogy 100 & Trilogy 200 systems provide continuous or intermittent ventilatory support for the care of
individuals who require mechanical ventilation. The Trilogy 100 & Trilogy 200 are intended for pediatric
through adult patients weighing at least 5 kg (11 lbs).
The device is intended to be used in home, institution/hospital, and portable applications such as wheelchairs
and gurneys, and may be used for both invasive and non-invasive ventilation. It is not intended to be used as
a transport ventilator.
The system is recommended to be used only with various combinations of Respironics-approved patient circuit
accessories, such as patient interface devices, humidifiers, water traps, and circuit tubing.
1.2 TRILOGY O2& TRILOGY 202 INTENDED USE
The Respironics Trilogy O2& Trilogy 202 systems provides continuous or intermittent ventilatory support for
the care of individuals who require mechanical ventilation with or without FiO2blending. Trilogy O2& Trilogy
202 are intended for pediatric through adult patients weighing at least 5 kg (11 lbs.).
The device is intended to be used in hospitals and institutions, and for portable applications such as
wheelchairs and gurneys only when in an institutional setting. It may be used for both invasive and non-
invasive ventilation. It is not intended to be used as a transport ventilator.
The system is recommended to be used only with various combinations of Respironics-approved patient circuit
accessories, such as patient interface devices, humidifiers, water traps, and circuit tubing.
1.3 TRILOGY 100 & TRILOGY 200 SYSTEM OVERVIEW
This ventilator provides both pressure control and volume modes of therapy. The device can provide non-
invasive or invasive ventilation. It can be used to provide total therapy to patients as they progress from non-
invasive to invasive ventilation.
When prescribed, the device provides numerous special features to help make patient therapy more
comfortable. For example, the ramp function allows you to lower the pressure when trying to fall asleep. The
air pressure will gradually increase until the prescription pressure is reached. Additionally, the Flex comfort
feature provides increased pressure relief during the expiratory phase of breathing.
The ventilator can be operated using several different power sources, including an internal Lithium-Ion battery.
This battery is automatically used when the detachable Lithium-Ion battery pack, external Lead Acid battery, or
AC power are not available.

PAGE 1-2
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
1.4 TRILOGY O2& TRILOGY 202 SYSTEM OVERVIEW
This ventilator provides both pressure control and volume modes of therapy. The device can provide non-
invasive or invasive ventilation. It can be used to provide total therapy to patients as they progress from non-
invasive to invasive ventilation.
When prescribed, the device provides numerous special features to help make therapy more comfortable. For
example, the ramp function allows you to lower the pressure when trying to fall asleep. The air pressure will
gradually increase until the prescription pressure is reached. Additionally, the Flex comfort feature provides
increased pressure relief during expiratory phase of breathing.
The ventilator can be operated using several different power sources, including an internal Lithium-Ion battery.
This battery is automatically used when the detachable Lithium-Ion battery pack, external Lead Acid battery, or
AC power are not available.
This ventilator is equipped with an oxygen blending module which allows oxygen to be delivered to the patient
within a range of 21% to 100% concentration.
1.5 SERVICE TRAINING
Respironics offers service training for the Trilogy devices. Training includes complete disassembly of the
device, troubleshooting subassemblies and components, setup of test equipment, and necessary testing. For
more information, contact the Service Marketing department at:
E-mail: [e-mail]
Phone: [phone]
Fax: [phone]
1.6 SERVICE/TECHNICAL SUPPORT STATEMENT
For technical assistance, please contact Respironics Customer Satisfaction.
U.S.A. and Canada
Phone:[phone]
Fax: [phone]
International
Phone: [phone]
Fax: [phone]

PAGE 2-1
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
CHAPTER 2: WARNINGS, CAUTIONS, & NOTES
2.0 CHAPTER OVERVIEW
Warnings, cautions, and notes are used throughout this manual to identify possible safety hazards, conditions
that may result in equipment or property damage, and important information that must be considered when
performing service and testing procedures. Please read this chapter carefully before servicing Trilogy
Ventilators.
2.1 WARNINGS
WARNING
Warnings indicate the possibility of injury to people.
CAUTION
Cautions indicate the possibility of damage to the device.
NOTE
Notes are used to emphasize a characteristic or important consideration.
WARNINGS
•Electronic components used in this device are subject to damage from static electric-
ity. Repairs made to this device must be performed only in an antistatic, Electro-static
Discharge (ESD)-protected environment.
•To assure the safety of the service technician and the specified performance of the
device, Respironics requires that only trained technicians perform any repairs or
adjustment to the Trilogy devices.
•High voltages are present inside this device. To avoid electrical shock, disconnect the
electrical supply before attempting any repairs on the device.
•DO NOT immerse this device into any fluids.

PAGE 2-2
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
2.2 CAUTIONS
2.3 NOTES
CAUTIONS
•Federal law (US) restricts this device to sale by, or on the order of, a physician.
•Care should be taken to avoid exposure of Trilogy Ventilators to temperatures at or
near the extremes of those specified in the Specifications Chapter of this manual. If
exposure to such temperatures has occurred, the device should be allowed to return
to room temperature before being turned on.
•Never place liquids on or near Trilogy Ventilators.
•To avoid electrical shock, disconnect the electrical supply before cleaning Trilogy
Ventilators.
•The information in this manual is provided for service personnel reference.
NOTES
•Additional Warnings, Cautions and Notes are located throughout this manual.
•Refer to the Trilogy Provider Manuals for additional Warnings, Cautions and Notes.

PAGE 3-1
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
CHAPTER 3: SPECIFICATIONS, CLASSIFICATIONS, & SYSTEM
FEATURES
3.0 CHAPTER OVERVIEW
This chapter identifies the specifications, classifications, & system features for the Trilogy Ventilators.
3.1 ENVIRONMENTAL SPECIFICATIONS
3.2 TRILOGY 100 & TRILOGY 200 PHYSICAL SPECIFICATIONS
3.3 TRILOGY O2& TRILOGY 202 PHYSICAL SPECIFICATIONS
Operating Storage
Temperature 5° C to 40° C -20° C to 60° C
Relative Humidity 15 to 95% (non-condensing) 15 to 95% (non-condensing)
Atmospheric Pressure 110 kPa to 60 kPa N/A
The operating range for the charging of the internal and detachable batteries is 10° C to 30° C.
The internal and detachable batteries will power the ventilator for the full operating range of 5°
C to 40° C.
Accuracies stated in this manual are based on specific environmental conditions. For stated
accuracy, the environmental conditions are: Temperature: 20-30° C, Humidity: 50% relative,
Altitude: nominally 380 meters
Dimensions 16.68 cm L x 28.45 cm W x 23.52 cm H
Weight Approximately 5 kg (with the detachable battery installed)
Dimensions 21.13 cm L x 28.45 cm W x 23.52 cm H
Weight Approximately 6.1 kg (with the detachable battery installed)

PAGE 3-2
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
3.4 ELECTRICAL SPECIFICATIONS
3.5 PRESSURE SPECIFICATIONS
AC Voltage Source 100 to 240 VAC, 50/60 Hz, 2.1 A
Detachable Battery: Voltage: 14.4 VDC
Capacity: 71 Wh
Chemistry type: Lithium-Ion
Internal Battery: Voltage: 14.4 VDC
Capacity: 71 Wh
Chemistry type: Lithium-Ion
Type of Protection Against Electric Shock: Class II/Internally Powered Equipment
Degree of Protection Against Electric Shock: Type BF Applied Part
Degree of Protection Against Ingress of Water: Device: Drip Proof, IPX1
Mode of Operation: Continuous
Fuses: There are no user-replaceable fuses.
Power Consumption: 2.1 A @ 100 VAC = 210 Watts of Power
Consumption
Output: 4 to 50 pressure units (may be cmH2O, hPA, or
mBar depending on device setup)

PAGE 3-3
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
3.6 SD CARD & SD CARD READER
Use only SD cards and SD card readers available from Respironics or the following:
•SanDisk®Standard SD Card - 2.0 GB - Respironics Part Number: 1053952
•SD Card Reader/Writer - Respironics Part Number: 1047300
3.7 STANDARDS COMPLIANCE
This device is designed to conform to the following standards:
•IEC 60601-1: Medical electrical equipment - Part 1: General requirements for safety
•IEC 60601-1-2: General requirements for safety - Collateral standard: Electromagnetic compatibil-
ity - Requirements and tests
•ISO 10651-2-Lung ventilators for medical use -- Particular requirements for basic safety and
essential performance -- Part 2: Home care ventilators for ventilator-dependant patients
•RTCA-D0160F section 21, category M; Emission of Radio Frequency Energy (Trilogy 200 Only)

PAGE 3-4
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
3.8 CONTROL ACCURACY
PARAMETER RANGE ACCURACY
IPAP 4 to 501pressure units2Greater of 2 pressure units or 8% of setting
EPAP 0 to 25 pressure units for Active Circuits
4 to 25 pressure units for Passive Circuits
Greater of 2 pressure units or 8% of setting
CPAP 4 to 20 pressure units Greater of 2 pressure units or 8% of setting
PEEP 0 to 25 pressure units for Active Circuits
4 to 25 pressure units for Passive Circuits
Greater of 2 pressure units or 8% of setting4
Pressure 4 to 50 pressure units Greater of 2 pressure units or 8% of setting
Pressure support 0 to 30 pressure units3Greater of 2 pressure units or 8% of setting4
Tidal Volume 50 to 2000 ml5Greater of 10 ml or 10% of setting (Active Circuits)
Greater of 15 ml or 15% of setting (Passive Circuits)
Breath Rate 0 to 60 BPM for AC mode
1 to 60 BPM for all other modes
Greater of + 1 BPM or +10% of the setting
Timed Inspiration 0.3 to 5.0 seconds + .1 second
Rise Time 1 to 66+2 pressure units (the device will increase to a pressure
of .67* (IPAP - EPAP) + 2 pressure units @ the set rise
time multiplied by 100 ms for pressure supports less
than or equal to 25.)
Ramp Start Pressure 0 to 25 pressure units for Active Circuits
4 to 25 pressure units for Passive Circuits
4 to 19 pressure units in CPAP mode
8% of setting + 2% Full Scale
Ramp Length Off, 5 to 45 minutes + 2 minutes
Flex Off, 1 to 37N/A
Flow Trigger Sensitivity 1 to 9 l/min N/A
Trilogy 100, Trilogy 200, &
Trilogy 202, Flow Cycle
10 to 90% N/A
Trilogy O2Flow Cycle 10 to 40% N/A
Apnea Rate 4 to 60 BPM Greater of 1 BPM or 10% of setting
FiO2 Output
(Trilogy O2& Trilogy 202
Only)
21% to 100% 21% to 50% is +3%
50% to 95% is +5%
100% is -5%
O2 Input Pressure Rating
(Trilogy O2& Trilogy 202
Only)
40 to 87 PSI
Specifications listed above are based on using a standard circuit (1.8 meter tubing - REF 622038; Passive Exhalation Device - REF
1040417; Active Exhalation Device with PAP - REF 1053716)
1Limited to 25 pressure units when using the Bi-Flex feature in S mode.
2Pressure units may be cmH2O, hPa, or mBar depending on device setup.
3The difference between the Inspiratory Pressure and the Expiratory Pressure must never be more than 30 pressure units.
4Pressure Support and PEEP not to exceed 50 pressure units.
5Reflects compensation for BTPS.
6The range of values correspond to the tenths of seconds (e.g., a setting of 4 indicates a Rise Time of 0.4 seconds).
7Flex is not available when AVAPS is active. Flex is not available with Active Circuits.

PAGE 3-5
TRILOGY SERVICE & TECHNICAL INFORMATION
1002735, VER. 05
3.9 MEASURED PATIENT PARAMETERS
3.10 TRILOGY 100 SPONTANEOUS BREATHING DURING POWER FAILURE CONDI-
TIONS
3.11 TRILOGY 200, TRILOGY O2, & TRILOGY 202 SPONTANEOUS BREATHING DUR-
ING POWER FAILURE CONDITIONS
3.12 RESISTANCE VALUES
During a ventilator failure, both the inhalation resistance and the exhalation resistance, measured at the patient
connection port, will not exceed 10 pressure units at 60 l/min. or 0.8 pressure units at 5 l/min.
PARAMETER RANGE ACCURACY
Vte/Vti 0 to 2000 ml Greater of 15ml or 15% of reading
Minute Ventilation 0 to 99 l/min Calculation based on measured Vte
or Vti and Respiratory Rate
Estimated Leak Rate 0 to 200 l/min N/A
Respiratory Rate 0 to 80 BPM Greater of 1 BPM or 10% of reading
Peak Inspiratory Flow 0 to 200 l/min 3 l/min plus 15% of reading
Peak Inspiratory Pressure 0 to 99 pressure units Greater than 2 pressure units or
10% of reading
Mean Airway Pressure 0 to 99 pressure units Greater than 2 pressure units or
10% of reading
% Patient Triggered Breaths 0 to 100% N/A
I:E Ratio 9.9- 1: 1-9.9 Calculation based on Inspiratory
Time and Expiratory Time
All flows and volumes are measured at BTPS conditions.
FLOW SET POINT (LPM)
INSPIRATORY RESISTANCE
(PRESSURE UNITS)
EXPIRATORY RESISTANCE
(PRESSURE UNITS)
Active Circuit Passive Circuit Active Circuit Passive Circuit
30 < 2.0 < 1.0 < 1.5 < 1.2
60 < 10.0 < 4.0 < 4.0 < 3.7
FLOW SET POINT
(LPM)
INSPIRATORY RESISTANCE (PRESSURE
UNITS)
EXPIRATORY RESISTANCE (PRESSURE
UNITS)
Active
Circuit
Active Circuit
with Proximal
Flow Sensor
Passive
Circuit
Active
Circuit
Active Circuit
with Proximal
Flow Sensor
Passive
Circuit
30 < 3.0 < 3.5 < 2.0 < 2.0 < 2.0 < 1.5
60 < 9.0 < 10.5 < 5.0 < 3.0 < 4.5 < 4.0