Respironics REMstar Plus with C-Flex User manual

REMstar Plus with C-Flex User Manual ❍ 1
Table of Contents
Symbol Key................................................................................... 2
Intended Use & Contraindications ............................................. 3
Specifications ............................................................................... 4
Warnings ....................................................................................... 5
Cautions ........................................................................................ 6
Unpacking the System................................................................. 6
System Features .......................................................................... 7
First Time Setup ........................................................................... 8
❍ Installing the Filter .................................................................. 9
❍ Device Settings .................................................................... 10
❍ Assembling the Circuit ......................................................... 15
Accessories ................................................................................ 16
❍ Adding a Humidifier .............................................................. 16
❍ Adding Oxygen to the System.............................................. 16
❍ Using DC Power with the System ........................................ 16
Routine Use ................................................................................ 17
❍ Connecting the Circuit.......................................................... 17
❍ Adjusting the Circuit ............................................................. 17
❍ Ramp Button ........................................................................ 18
❍ Turning the System Off ........................................................ 18
❍ Helpful Hints......................................................................... 18
Routine Maintenance ................................................................. 19
❍ Cleaning the Filter ................................................................ 19
❍ Cleaning the System ............................................................ 19
❍ Reordering ........................................................................... 20
❍ Service ................................................................................. 20
Traveling with the System ......................................................... 20
Troubleshooting ......................................................................... 21
EMC Requirements .................................................................... 23
Warranty ...................................................................................... 26

2 ❍ REMstar Plus with C-Flex User Manual
Symbols
REMstar Plus with C-Flex CPAP systems are the subject of the following U.S. patents: #5239995 and #6105575.
Other patents pending.
REMstar, Whisper Swivel and Encore are registered trademarks of Respironics, Inc.
©Respironics, Inc. 2003
0123
!

REMstar Plus with C-Flex User Manual ❍ 3
The Respironics REMstar Plus with C-Flex system is a CPAP (Continuous
Positive Airway Pressure) device designed for the treatment of adult Obstruc-
tive Sleep Apnea (OSA) only.
The REMstar Plus with C-Flex is to be used only on the instruction of a
licensed health care professional. Your home care provider will make the
correct pressure settings according to your health care professional’s
prescription.
Several accessories are available to make your OSA treatment with the
REMstar Plus with C-Flex CPAP system as convenient and comfortable as
possible. To ensure that you receive the safe, effective therapy prescribed
for you, use only Respironics accessories.
Read and understand the entire user manual before operating this system.
If you have any questions concerning the use of this system, contact your
home care provider or health care professional.
IMPORTANT!
Intended Use
Studies have shown that the following pre-existing conditions may
contraindicate the use of positive airway pressure therapy for some patients:
•Bullous Lung Disease
• Bypassed Upper Airway
• Pneumothorax
• Pathologically Low Blood Pressure
•Pneumocephalus has been reported in a patient using nasal
Continuous Positive Airway Pressure. Caution should be used when
prescribing CPAP for susceptible patients such as those with: cerebral
spinal fluid leaks, abnormalities of the cribriform plate, prior history
of head trauma, and/or pneumocephalus.
(Chest 1989; 96:1425-1426)
•The use of positive airway pressure therapy may be temporarily
contraindicated if you exhibit signs of a sinus or middle ear infection.
Contact your health care professional if you have any questions concerning
your therapy.
Contraindications
Intended Use

4 ❍ REMstar Plus with C-Flex User Manual
Specifications
Dimensions: 9 1/2” x 6 7/8” x 4 1/2” (24 x 17 x 12 cm)
Weight: <4.0 lbs. (<1.8 kg)
Operation Transport & Storage
Temperature: 41 to 95°F (5 to 35°C) -4 to 140°F (-20 to 60°C)
Humidity: 15 to 95% Non-condensing 15 to 95% Non-condensing
Atmospheric Pressure: 76.7 to 102 kPascals N/A
This device is designed to conform to the following standards:
IEC 60601-1 General Requirements for Safety of Medical Electrical Equipment
IEC/EN 60601-1-2:2001 (2nd Edition) Immunity for Medical Electrical Equipment
EN ISO 17510-1 Sleep Apnea Breathing Therapy Devices
Continuous
100 - 240 VAC, 50/60 Hz, 1.0 A max.
12 VDC, 3.0 A max.
Class II Equipment
Type BF Applied Part
IPX0 - Ordinary Equipment
4 to 20 cm H2O (in 1 cm H2O increments)
4 to 20 cm H2O (±1.0 cm H2O)
Measured in accordance with EN ISO 17510 @ 6.6, 13.2, & 20 cm H
2
O @ 500 ml with BPM set to 10, 15, & 20
BPM performed at 23°C (±2°C), 50% RH (±5%), and an atmospheric pressure of 101.54 kPascals.
<30 dB(A)
Measured in accordance with EN ISO 17510 @ 10 cm H2O at the patient circuit. This measurement
applies to the CPAP device with or without the optional REMstar Heated Humidifier.
35 LPM
Measured in accordance with EN ISO 17510 @ 6.6, 13.2, & 20 cm H
2
O @ 500 ml with BPM set to 10, 15, & 20
BPM performed at 23°C (±2°C), 50% RH (±5%), and an atmospheric pressure of 101.54 kPascals.
±(0.15 + 4% of actual reading)
Device Size
Product Use,
Transport, and
Storage
Standards
Compliance
AC Power Consumption
Type of Protection
Against Electric Shock
Degree of Protection
Against Electric Shock
Degree of Protection
Against Ingress of Water
Pressure Range
Mode of Operation
Pressure Stability
Sound Pressure Level
Maximum Flow
DC Power Consumption
Pressure Display Accy.

REMstar Plus with C-Flex User Manual ❍ 5
• The instructions in this manual are not intended to supersede established
medical protocols.
•This device is intended for adult use only.
• This device is not intended for life support.
•CPAP devices have the potential to allow rebreathing of exhaled air.
To reduce this potential, observe the following:
-Use Respironics circuit accessories.
-Do not wear the mask and headgear for more than a few minutes
while the device is not operating.
- Do not block or try to seal the vent holes in the exhalation port.
As with most CPAP devices: At low CPAP pressures, some exhaled gas
(CO2) may remain in the mask and be rebreathed.
• Do not use this device if the room temperature is warmer than 95 ° F (35 ° C).
If this device is used at room temperatures warmer than 95 ° F (35 ° C), the
temperature of the airflow may exceed 106 ° F (41 ° C). This could cause
irritation to your airway.
•This equipment is not suitable for use in the presence of a flammable
anaesthetic mixture in combination with oxygen or air, or in the presence of
nitrous oxide.
• If you notice any unexplained changes in the performance of the REMstar
Plus with C-Flex, if it is making unusual or harsh sounds, if it has been
dropped or mishandled, if the enclosure is broken, or if water has entered
the enclosure, disconnect the power cord and discontinue use. Contact your
home care provider.
• To avoid electrical shock, disconnect the power cord before cleaning. DO NOT
immerse the device in any fluids.
• Contact your health care professional if symptoms of sleep apnea recur.
• Using the REMstar Plus with C-Flex at an incorrect elevation setting could
result in airflow pressures higher than the prescribed setting. Always verify
the elevation setting when traveling or relocating.
WARNING!
Indicates the
possibility for
injury to the user
or the operator.
Warnings & Cautions
CAUTION! • U.S. federal law restricts this device to sale by or on the order of a physician.

6 ❍ REMstar Plus with C-Flex User Manual
After unpacking the system, make sure you have everything shown here:
If any of the above parts are missing, contact your home care provider.
IMPORTANT!
Warnings & Cautions/Unpacking the System
• Tobacco smoke may cause tar build-up within the REMstar Plus with C-Flex
that may result in the REMstar Plus with C-Flex malfunctioning.
• The use of accessories other than those specified, with the exception of
cables sold by the manufacturer of the equipment or system as replacement
parts for internal components, may result in increased emissions or de-
creased immunity of the equipment or system.
Additional warnings and cautions are located throughout this manual as
they apply.
CAUTION!
Indicates the
possibility of damage
to the device.

REMstar Plus with C-Flex User Manual ❍ 7
System Features
AC Inlet ...............................Connect/disconnect the AC power cord here.
Air Outlet ............................ Connect the flexible tubing here.
Communications
Connector ............................For clinical use with the Encore®Pro Data Management Software or an
IEC 950 approved device. Connect the communications cable here.
DC Inlet ...............................Connect the optional DC power cord here.
Display Screen.....................All system settings, total operating time, and therapy hours will appear
here. Displays the pressure and elevation settings.
Filter Cap & Filters ............The foam filter screens out normal household dust and pollens. The
optional, ultra-fine filter is also included for more complete filtration of
very fine particles. The filter cap is designed to reduce the noise from
the REMstar Plus with C-Flex.
Humidifier Button .............. This button turns the REMstar heated humidifier on/off and allows the
heat setting to be adjusted. The humidifier is an optional accessory that
may be purchased separately.
Medical Product Note......... For ease at airport security stations, there is a note on the bottom of the
REMstar Plus with C-Flex stating that it is medical equipment. It may
help if you also take this manual with you when you travel.
Pressure Start / Stop
Button ................................This button starts/stops the airflow.
Ramp Button ....................... This button starts the ramp cycle or accesses the REMstar Plus with
C-Flex settings.
User Buttons........................ These buttons can be used to change some of the system settings.
AC Inlet
DC Inlet
Communications
Connector
Filter and
Filter Cap
Pressure
Start/Stop Button
Air Outlet
Ramp
Button
Humidifier
Button
Display
Screen
Medical
Equipment
Note (on bottom)
User Buttons

8 ❍ REMstar Plus with C-Flex User Manual
Do not use the REMstar Plus with C-Flex system until an appropriate
professional adjusts the settings! To order any accessories not included
with this system, contact your home care provider.
Note to home care provider: Before beginning setup, be sure that you
have available the REMstar Plus with C-Flex Home Care Provider
Setup Instructions. Setup instructions are not provided in this manual.
DO NOT connect any equipment to the REMstar Plus with C-Flex
unless recommended by Respironics or your health care provider.
If the REMstar Plus with C-Flex has been exposed to either very hot
or very cold temperatures, allow it to adjust to room temperature
(approximately 2 hours) before beginning setup.
CAUTION!
First Time Setup
WARNING!
WARNING!

REMstar Plus with C-Flex User Manual ❍ 9
First Time Setup (cont.)
1. Install the filters and filter cap.
The foam filter must be in place at all times when the
REMstar Plus with C-Flex is operating. The white
ultra-fine filter is optional and can be used in
addition to the foam filter. The ultra-fine filter is
recommended for people who are sensitive to tobacco
smoke or other small particles.
a. Place one of the foam filters over the ultra-fine
filter. If you are not using the ultra-fine filter,
simply place the foam filter into the filter area on
the back of the REMstar Plus with C-Flex.
An extra filter is included for your convenience.
b. Attach the filter cap. Position the cap so that the small opening on the
cap is facing down. Insert the cap’s tabs into the filter area opening.
To remove AC power, disconnect the power cord
from the electrical outlet.
Inspect the power cord often for any signs of
damage. Replace a damaged cord immediately.
The REMstar Plus with C-Flex is activated and ready for use when the
power cord is connected. The pressure start/stop button turns the
blower on/off.
3. Place the REMstar Plus with C-Flex on a firm,
flat surface.
Make sure the REMstar Plus with C-Flex is away
from any heating or cooling equipment (e.g., forced
air vents, radiators, air conditioners). Also make sure that bedding,
curtains, or other items are not blocking the filter or vents of the device.
Air must flow freely around the device for the system to work properly.
Installing the Filter
Power Cord
WARNING!
WARNING!
CAUTION!
CAUTION!
IMPORTANT!
!!
2. Connect the power cord. Plug the socket end of
the power cord into the AC inlet on the back of
the REMstar Plus with C-Flex. Plug the pronged
end of the power cord into an electrical outlet.

10 ❍ REMstar Plus with C-Flex User Manual
Once the power cord is plugged in, REMstar Plus with C-Flex’s system
version number, the total hours of use, and then the total therapy hours
will appear.
Display Screen: All device settings will appear here.
Pressure Start/Stop Button: Use this button to start/stop the
airflow. DO NOT start the airflow until the circuit tubing is connected.
Heated Humidifier Button: Use this button when the optional
REMstar Heated Humidifier has been prescribed. This button will
control the optional heated humidifier’s output. Follow the instructions
included with the humidifier.
Ramp Button: When the airflow is turned on, use this button to start
the ramp cycle (which lowers the airflow pressure and then gradually
increases it). This will allow you to fall asleep more comfortably.
When the airflow is turned off, use this button to access the patient
menu. Note: The ramp feature is not prescribed for all users.
User Buttons: These buttons can be used when entering various
menus to change some of the REMstar Plus with C-Flex settings.
Device
Settings
First Time Setup (cont.)
In the Setup Menu, the humidifier and
ramp buttons operate as up and down
keys to change the settings, the left/right
user buttons are used to go to the
previous/next question or setting, and the
start/stop button will allow you to exit the
Settings Menu.
Exit
Settings
Next
Previous
IMPORTANT!

REMstar Plus with C-Flex User Manual ❍ 11
Device
Settings
4. Verify/Change the REMstar Plus with C-Flex settings. To start the
setup menu, press and hold the ramp button until the device beeps
(The airflow must be turned off.)
Pressing the ramp button (when the airflow is turned on) will lower the
airflow pressure, if prescribed, and then will gradually increase it.
DO NOT use the REMstar Plus with C-Flex if the display is erratic.
Contact your home care provider for further instructions.
If at any time you wish to exit the setup menu, press the pressure on/off
button and the display will go back to the main screen.
a. The number of nights the REMstar Plus
with C-Flex was used for therapy for
more than 4 hours will appear. This
screen is only for reference. Your home
care provider may periodically ask you
for this information.
Press the right user button to access the next setting.
First Time Setup (cont.)
WARNING!
IMPORTANT!
Therapy
Hours
IMPORTANT!

12 ❍ REMstar Plus with C-Flex User Manual
First Time Setup (cont.)
b. The patient disconnect alert setting will
appear. This setting has two functions.
When a large, continuous air leak (such
as mask removal) has been detected in
the circuit, this setting enables/disables
the audible alert (a beeping sound) and
the Auto-off feature. The latter allows the REMstar Plus
with C-Flex to automatically turn the airflow OFF. You have the
option of turning the alert tone on or off.
1 = on 0= off
To change the setting, press the ramp or humidifier button until
the correct setting appears.
Press the right user button to access the next setting.
c. The button lights setting will appear. This
setting allows you to have the lights
behind the buttons turned on or off while
the airflow is turned on. (The lights will
always be on when the airflow is off.)
1 = on 0 = off
To change the setting, press the ramp or humidifier button until
the correct setting appears.
Press the right user button to access the next setting.
Setting the
Button
Lights
0
Turning the
Alert Tone
On or Off
0

REMstar Plus with C-Flex User Manual ❍ 13
First Time Setup (cont.)
d. The C-Flex level setting displays the
C-Flex level set by your home care
provider. Note: This setting will only
appear if C-Flex was prescribed
for you.
This setting allows you to adjust the level of air pressure relief
that you feel when you exhale during therapy.
Your home care provider will have already set a C-Flex level. If
this is not comfortable for you, you can increase or decrease the
setting. The setting of “1” provides a small amount of pressure
relief. To increase the pressure relief, change the setting to “2”
or “3.”
To change the setting, press the ramp or humidifier button.
Press the right user button to access the next setting.
Setting the
C-Flex Level
Setting the
Elevation
e. The elevation symbol and setting will
appear.
1 = less than 2,500 ft. (<762 m)
2 = 2,500 to 5,000 ft. (762 m to 1524 m)
3 = 5,001 to 7,500 ft. (1525 m to
2286 m)
*over 7,500 ft. = The airflow pressure
may not be accurate. Contact your home
care provider to have your pressure setting
adjusted.
To change the elevation setting, press the
ramp or humidifier buttons.
Press the right user button to access the
next setting.
3
WARNING! Using the REMstar Plus with C-Flex at an incorrect elevation setting
could result in airflow pressures higher than the prescribed setting.
Always verify the elevation setting when traveling or relocating.

14 ❍ REMstar Plus with C-Flex User Manual
Setting the
Minimum
Ramp
Pressure
First Time Setup (cont.)
f. The ramp starting pressure will appear.
Note: This setting will only appear if ramp
was prescribed for you.
The ramp feature will reduce the pressure
and then gradually increase (ramp) the
pressure to the prescription pressure setting
so that you can fall asleep more comfort-
ably.
Your home care provider will have already set a ramp starting
pressure. If you feel the ramp starting pressure is set too low or too
high, you can change the setting.
(Range: 4 cm H2O - Prescription Pressure)
To change the setting, press the ramp or humidifier button. (You can
hold the button down to make the setting change faster.)
The settings are complete. Press the left user button to access the
previous setting, or press the pressure start/stop button to exit the
settings menu. Or, if you want to return to step a, press the right user
button.
Exit the Settings

REMstar Plus with C-Flex User Manual ❍ 15
Assembling
the Circuit 5. Assemble the circuit. To use the system, you will need the following
accessories in order to assemble the recommended circuit.
• Respironics Nasal Mask with integrated exhalation port
(or Respironics mask with separate exhalation port such as the Whisper Swivel®II)
• Respironics 6 ft. (1.83 m) Flexible Tubing
• Respironics Headgear (for the mask)
If multiple persons are going to use the REMstar Plus with C-Flex
(e.g., rental devices), a low-resistance, main flow bacteria filter should
be installed in-line between the REMstar Plus with C-Flex and the
circuit tubing. Pressures must be verified by your home care provider
when alternate or optional accessories are
in place.
a. Connect the flexible tubing to the air
outlet on the front of the REMstar Plus
with C-Flex.
b. If you are using a mask
with a built-in exhalation
port, connect the mask’s
connector to the flexible
tubing.
If you are using a mask with a separate exhala-
tion port, connect the flexible tubing to the
exhalation port. Position the exhalation port so
that the vented air is blowing away from your
face. Connect the mask’s connector to the
exhalation port.
WARNING!
WARNING!
Do not block or otherwise try to seal the air openings (vent holes) on
the exhalation port. Explanation of the warning: The REMstar Plus with C-Flex
is intended to be used with masks and circuits that have an exhalation port designed to
exhaust CO2from the circuit. When the REMstar Plus with C-Flex is turned on and
functioning properly, new air from the REMstar Plus with C-Flex flushes the exhaled
air out through the exhalation port. When the REMstar Plus with C-Flex is turned off,
enough fresh air will not be provided through the mask, and exhaled air may be
rebreathed. Rebreathing of exhaled air for longer than several minutes can, in some
circumstances, lead to suffocation. This warning applies to most CPAP devices.
If you are using a full face mask (i.e., a mask covering both your
mouth and your nose), the mask must be equipped with a safety
(entrainment) valve.
First Time Setup (cont.)
Flexible
Tubing
Mask's
Connector
WARNING!
Rotating
Connector
Whisper
Swivel II
Vent Holes
Flexible
Tubing

16 ❍ REMstar Plus with C-Flex User Manual
Contact your home care provider for additional information on the
accessories available for the REMstar Plus with C-Flex system. When
using optional accessories, always follow the instructions enclosed with
the accessories.
Accessories
The REMstar Heated Humidifier and REMstar
Integrated Humidifier are available from your
home care provider. The humidifiers may
reduce nasal dryness and irritation by adding
moisture (and heat if applicable) to the airflow.
Always place the humidifier at the same level
or lower than the REMstar Plus with C-Flex device and the
mask so that any excess condensation in the tubing drains back into the
water chamber. The humidifier must be level for proper operation.
Oxygen may be added at the mask connection. Please note the warnings
listed below when using oxygen with the REMstar Plus with C-Flex.
The oxygen supply must comply with the local regulations for medical
oxygen.
A Respironics Pressure Valve (part number 302418) must be placed
in-line with the patient circuit.
Turn the REMstar Plus with C-Flex on before turning the oxygen on.
Turn the oxygen off before turning the REMstar Plus with C-Flex off.
Explanation of Warning: When the REMstar Plus with C-Flex is turned off, but the oxygen
flow is still turned on, oxygen may accumulate within the REMstar Plus with C-Flex
enclosure and create a fire risk. Turning the oxygen off before turning the REMstar Plus
with C-Flex off will prevent oxygen accumulation in the REMstar Plus with C-Flex and will
reduce the risk of fire. This warning applies to most CPAP devices.
Oxygen accelerates fires. Keep the REMstar Plus with C-Flex and the
oxygen container away from heat, open flames, any oily substance, or
other sources of ignition. DO NOT smoke in the area near the REMstar
Plus with C-Flex or the oxygen container.
Adding a
Humidifier
WARNING!
Adding Oxygen
WARNING!
WARNING!
WARNING!
WARNING!
You can also use the REMstar Plus with C-Flex in a
stationary recreational vehicle, boat, or motor home with a 12
volt DC power source. Do not operate the REMstar Plus with
C-Flex while the vehicle is in motion. Contact your home
care provider for additional information.
Use only the Respironics DC power system available from your home care
provider. Use of any other system may cause damage to the REMstar
Plus with C-Flex or your vehicle.
CAUTION!
Using
DC Power

REMstar Plus with C-Flex User Manual ❍ 17
Connecting
the Circuit
1. Connect the circuit.
Before each use, examine the flexible tubing for any damage or
debris. If necessary, clean the tubing to remove the debris.
Replace any damaged tubing.
a. Connect the mask to the headgear, following the instructions
included with the headgear.
b. Put on the mask and headgear, and breathe normally through
your nose. The airflow should automatically start when you
begin breathing through the circuit. If the airflow does not start
within four breaths, press the pressure start/stop button on the
top of the REMstar Plus with C-Flex. When operating the
system with some mask types or some circuit configurations, the
airflow may NOT automatically start.
Adjusting
the Circuit
2. Adjust the circuit. Lie down on your bed, and adjust the flexible tubing
so it is free to move if you turn in your sleep. Adjust the mask and
headgear until you have a comfortable fit and there are no airflow leaks
into your eyes.
Routine Use
IMPORTANT!
Pressure
Start/Stop
Button

18 ❍ REMstar Plus with C-Flex User Manual
Pressing the ramp button will reduce the air pressure when you are
trying to fall asleep. The air pressure will gradually increase until your
prescription pressure is reached. If your physician prescribed ramp for
you, pressing the button will reduce the pressure and then gradually
increase (ramp) the pressure to the therapeutic pressure setting so that
you can fall asleep more comfortably. Note: The ramp feature is not
prescribed for all users.
3. Press the Ramp button on the top of the
REMstar Plus with C-Flex. You can use
the Ramp button as often as you wish
during the night.
4. Remove the mask and headgear. Press the
pressure start/stop button on the top of the
REMstar Plus with C-Flex to start the
airflow.
Or, if the patient disconnect alert setting
has been turned on, the airflow will
automatically turn off. When you remove
the mask, the airflow will decrease to a
low pressure. After approximately 45
seconds the alert tone will sound. Then
the airflow will automatically turn off
(in less than 2 minutes after you remove
the mask).
The humidifier button is active only when a REMstar Heated
Humidifier is connected or when the REMstar Plus with
C-Flex is in the Setup Menu. Refer to the REMstar Heated
Humidifier’s instructions for additional information.
Using the
Ramp Button
Turning the
System OFF
Helpful Hints • If the alert tone sounds, press any button on the REMstar Plus with
C-Flex to silence the alert tone. Refer to the “Troubleshooting” section
of the manual for further instructions.
• Make sure that bedding, curtains, or other items are not blocking the
filter or vents of the REMstar Plus with C-Flex. Air must flow freely
around the REMstar Plus with C-Flex for the system to work properly.
• If the airflow from the REMstar Plus with C-Flex feels cold, reposition
the circuit tubing so that it runs under your bed covers to reduce heat loss
while you sleep.
Routine Use (cont.)
IMPORTANT!
Ramp
Button
Pressure
Start/Stop
Button

REMstar Plus with C-Flex User Manual ❍ 19
Cleaning
the Filter
CAUTION!
The gray foam filter should be cleaned at least once every two weeks under
normal usage and replaced with a new one every six months. The white ultra-
fine filter is disposable and should be replaced after 30 nights of use or sooner
if it appears dirty. DO NOT clean the ultra-fine filter.
Operating the REMstar Plus with C-Flex with a dirty filter may keep the
system from working properly and may cause damage to the device.
1. Remove the filter cap by gently pressing on its sides.
2. Change the filter.
a. Remove the foam filter by gently pulling around the edges of the filter.
Rinse the filter in a steady stream of running water. Squeeze out the
water and repeat. Air dry the filter on a rack for 8 to 12 hours or in a
clothes dryer for 15 to 20 minutes. If you are using the white ultra-fine
filter and it appears dirty, discard the filter and replace it with a new
one.
b. Place the white ultra-fine filter under the clean foam filter. Insert the
filter(s) into the filter area on the back of the REMstar Plus with
C-Flex. Replace the filter cap.
Never install a wet filter into the REMstar Plus with C-Flex. We recom-
mend that you clean the filter in the morning and alternate using the two
filters provided with the system to ensure enough drying time for the
cleaned filter.
Clean the mask and tubing daily.
To avoid electrical shock, unplug the REMstar Plus with C-Flex before
cleaning. Do not immerse the REMstar Plus with C-Flex in any fluids.
1. Disconnect the flexible tubing from the REMstar Plus with C-Flex.
Gently wash the flexible tubing in a solution of warm water and a mild
detergent. Rinse the tubing thoroughly and air dry.
2. Wipe the outside of the REMstar Plus with C-Flex with a cloth slightly
dampened with water and a mild detergent. Let the REMstar Plus with
C-Flex dry before plugging in the power cord.
3. Inspect the REMstar Plus with C-Flex and all circuit parts for any damage
after cleaning. Replace any damaged parts.
4. For details on cleaning your mask and accessories, refer to the cleaning
instructions packaged with the accessories.
CAUTION!
Routine Maintenance
Cleaning
the System
WARNING!

20 ❍ REMstar Plus with C-Flex User Manual
WARNING!
Contact your home care provider to order accessories or replace-
ment filters.
The REMstar Plus with C-Flex system does not require routine
servicing.
When necessary, dispose of the REMstar Plus with C-Flex and
accessories in accordance with local regulations.
If you notice any unexplained changes in the performance of the
REMstar Plus with C-Flex, if it is making unusual or harsh
sounds, if it has been dropped or mishandled, if the enclosure is
broken, or if water has entered the enclosure, discontinue use.
Contact your home care provider.
If the REMstar Plus with C-Flex malfunctions, contact your home
care provider immediately. Never attempt to open the REMstar
Plus with C-Flex’s enclosure. Repairs and adjustments must be
performed by Respironics authorized service personnel only.
Unauthorized service could cause injury, invalidate the warranty,
or result in costly damage.
When you are traveling, the carrying case is for carry-on luggage
only. The carrying case will not protect the system if it is stored as
checked baggage.
For convenience at security stations, there is a note on the bottom of
the REMstar Plus with C-Flex stating that it is medical equipment.
It may be helpful to bring this manual along with you to help
security personnel understand the REMstar Plus with C-Flex.
If you are traveling to a country with a line
voltage different than the one you are currently
using, a different power cord or an international
plug adapter may be required to make your
power cord compatible with the power outlets of the country to
which you are traveling. Contact your home care provider for
additional information.
Reordering
Reordering/Service/Traveling with the System
Service
WARNING!
Traveling with
the System
Security
Stations
Checking the
Power Cord