REVELL Kenworth W-900 User manual

KIT 1507
85150700200
The Kenworth W900 has every
thingthat long-haul truckers need
to get the job done. This impres
sive Kenworth design sports a
duel sleeper capped with an
aerodynamic roofline which tells
everyonewho sees it that itis truly
a road machine without equal.
Your Revell model features a
hood that tilts forward to show a
detailed tubocharged six cylinder
diesel engine, chrome platedsim
ulated alloy wheels, duel exhaust
stacks, roof mounted horns and
mirrors with antennas. Decals
with optional stripes or cus
tom graphics are also included.
•REPEAT SEVERAL TIMES
•A REPETERPIUSILURS FOIS •
OPTIONAL PARTS
• PIECES EN OPTION
READ THIS BEFORE YOU BEGIN
• Study the assembly drawings.
• Each plastic part is identitied by a number.
" In the assembly drawings, some parts will be
marked by a star (*) to indicate chrome
plated plastic.
• For
better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
• Check the fit ol each piece before
cementing in place.
' Use only cement for polystyrene plastic.
'Scrape plating and paint from areas
to be cemented.
• Allowpaint to dry thoroughly before
handling parts.
• Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
<!. Waituntildecal is movable on paper backing.
5. Place decal in positionon model, face up and
slide backing away.
6. Press out air bubblos with a soft damp cloth.
7. Milkiness that may
appear is for bettor decal
adhesion and willdry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fullydry.
9. Allow the decals 48 hours to dry before
applying clear coal.
NOTE: Decals arc compatible with
setting solutions or solvents.
KENWORTH® W900
CD
' DECAL
•DECAL COMANIE
• ALTERNATIVE ASSEMBLY
• ENSEMBLAGE ALTERNATIVE
•CEMENT TOGETHER
•A COLLER
• REMOVE AND THROW AWAY
•ARFTIRERET JETER
• DO NOT CEMENT
•NE PAS COLLFR
LIRE CE QUI SUIT AVANT DE COMMENCER
Etudinr los schemas do montago.
Chaque piece en plastique est identifiee par un numoro.
Sur les schemas de montage, certaines pieces sont
marquees d'une etoile (*) pour indiquer qu'elles sont en
plastique chrome.
Pour uno meilleure prise de la peinture et des autocollants.
laver les pieces en plastique avec une solution detergente peu
concentree. Les rincer et les laisser secher aI'air.
Verifierque chaque piece s'ajuste bien avant
de la coller en place.
N'utiliserque de la colle pour polystyrene.
Gratter les parties a collerpour enleverle chrome et la peinture.
Laisserla peinturebiensecher avantde manipuler les pieces.
Toute piece inulilisee pent etre jeteo.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
Decouper I'autocollant desire de la feuille.
Tremper I'autocollant dans de leau pendantquelquessecondes.
Placer I'autocollant mouille sur unoservietteen papior.
Attondez que I'autocollant puisso etre deplace sur son
support en papier.
Mettre I'autocollant en position sur le modele face sur
le
dessus et faire glisser le support pour I'enlever,
Appuyeravec un
chiffon doux humidopoureliminorles bullesd'air.
La
substance laiteuse qui peut apparaitre est destinee a
ameliorer I'adhesion de I'autocollant et devient incolore au
sechage. Essuyer pour enlever tout excedent d'adhesif.
Ne pas toucher I'autocollant tant qu'il n'est pas bien sec.
Laisser I'autocollant secher pendant 48 heures avant
d'appliquor une couche Iransparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de lixagc ou les solvants.
This paint guide is provided to complete this kit
as shown on the box.
Co guide de pemiurososi loumipour wproduiw. le modAlo
rtfdtiiiqui iipparitil sur In Polie.
Semi Gloss Black
Noir satine
Flat Tan
Havane mat
Gloss Blue
Bleu brilliant
Yellow
Jaune
Gloss Orange
Orange brilliant
Aluminum
Aluminum
Silver
Argent
Steel Acier
Turn Signal Amber
Ambre
Transparent Red
Rouge Transparent
If you have any questions or comments, call our hotline at: [phone]
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85150700200). part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.

REAR SUSPENSION ASSEMBLY
46
REAR
AXLE BOTTOM
SEMI GLOSS
BLACK
SUSPENSION
SEMI GLOSS
BLACK
*32
FUEL TANK HALF
CHROME
58
SUSPENSION
SUPPORT
SEMI GLOSS BLACK
Kit 1507 -Page 2
39
FRAME
SEMI GLOSS
BLACK
FUEL TANK ASSEMBLY
*34
FUEL TANK HALF
CHROME
41
AIR TANK
ALUMINUM
"V
*33
FUEL TANK HALF
CHROME
•31
FUEL TANK HALF
CHROME
"NX"
"\r~

3
@
52
INNER WHEEL
SEMI GLOSS BLACK
REAR WHEEL ASSEMBLY
51
SPACER
SEMIGLOSS BLACK
/
fK
•%/
•so
OUTER WHEEL
CHROME
CUT-A-WAY VIEW
4
FRONT SUSPENSION ASSEMBLY
45
TIE ROD
SEMIGLOSS BLACK
38
AXLE
SEMI GLOSS BLACK \
55
SHOCK
SEMI GLOSS BLACK
55
SHOCK
SEMI GLOSS BLACK
Kit 1507-Page 3

49
INNER WHEEL
SEMI GLOSS BLACK
DRAG LINK ASSEMBLY
-57
STEERINGLINK
SEMI GLOSS BUCK
FRONT WHEEL ASSEMBLY
•48
OUTER WHEEL
CHROME
CROSSOVER / EXHAUST assembly
71
CROSSOVER
PIPE
ALUMINUM
Kit 1507-Page 4
73
EXHAUST
COLLECTOR
S7EEI

8
62
RIGHT
ENGINE HALF
YELLOW
64
TIMING COVER
YELLOW
65
PULLY
ASSEMBLY
YELLOWPULLIES
WITH SEMI GLOSS
BLACKBELTS
66
AFTER COOLER
YELLOW
63
HEAD ASSEMBLY
YELLOW
ENGINE ASSEMBLY
61
LEFT
ENGINE HALF
YELLOW
67
COMPRESSOR
ALUMINUM
SEMI GLOSSBLACK
RIGHT SIDE OF ENGINE
SILVER
ENGINE TO FRAME
Kit 1507-Page 5

GEAR SHIFT
SEMI GLOSS
BLACK
Kit 1507-Page 6
DRIVESHAFT ASSEMBLY
47
DRIVESHAFT
SEMIGLOSS BLACK
INTERIOR ASSEMBLY
STEERING
WHEEL
SEMI GLOSS
BLACK
STEERING
COLUMN
SEMI GLOSS BLACK
DASHBOARD
TAN
DIALS. BLACK WITH
SILVER RIMS AND DETAILS

1
CAB
BODY COLOR
CAB/INTERIOR ASSEMBLY
INTERIOR INTO CAB
Kit 1507 - Page 7

12
10
AIR CLEANER
HALF
BODY COLOR
Kit 1507-Page 8
AIR CLEANER ASSEMBLY
12
AIR CLEANER
HALF
BODY COLOR
*14
AIR CLEANER
CAPS
''"•'' '.Mr
13
AIR CLEANER
HALF
BODY COLOR
BOX STEP ASSEMBLY
*36
BATTERY BOX
STEP
CHROME
11
AIR CLEANER
HALF
BODY COLOR

28
RADIATOR
FRONT
SEMI GLOSS BLACK
STACKASSEMBLY
*53
OUTER STACK
CHROME
*54
INNER STACK
CHROME
2
n
RADIATOR ASSEMBLY
29
RADIATOR REAR
SEMI GLOSS BLACK
Kit 1507-Page 9

16
30
QUARTER
FENDER
SEMI GLOSSBLACK
17
*22
HEADLIGHT
HOUSING
CHROME
23
HEADLIGHT
LENS
CLEAR ,
6
HOOD
BODY COLOR
*24
GRILLE
.... ...;"
23
HEADLIGHT LENS
CLEAR
Kit 1507-Page 10
REAR ASSEMBLY
GRILLE ASSEMBLY
*35
GRAB HANDLE
CHROME

18
19
21
BUMPER UGHTS
CLEAR
•18
AIR HORN
CHROME
•19
CAB LIGHT
CHROME
(PAINTSHADED
AREA AMBER)
FRONT BUMPER ASSEMBLY
FINAL ASSEMBLY
•19
CAB UGHTS
CHROME
•18
(PAINTSHADED
AIR HORN
AREAS AMBER)
CHROME
•19
CAB LIGHT
CHROME
(PAINTSHADED
AREA AMBER)
•20
LEFT
SIDE MIRROR
CHROME
TURNSIGNAL-
AMBER FRONT
REDBACK
Kit 1507-Page 11

DECAL PLACEMENT
Kit 1507-Page 12
17
(Other side
using decal
H 18)