‘57 Chevy® Bel Air®
The 1957 Chevrolet is one of the most popular and
widely recognized cars in history, and a true American
classic. The ’57 Bel Air two door hardtop is one of the
most desirable of the many ’57 Chevy body styles, espe-
cially if it is equipped with a factory fuel-injected engine.
Chevrolet’s legendary small block V-8 grew to 283 cubic
inches for 1957, and the fuel-injected versions were
among the first American engines to generate one
horsepower per cubic inch of engine displacement.
With its great looks and easily hot rodded V-8 engine,
the ‘57 Bel Air was, and still is, a hot rodder’s and cus-
tomizer’s dream.
Your Revell Wheels of Fire kit features
easy snap and screw together
assembly, chrome plated
parts, a stock or low-
ered ride height
option, and color- ful
stick-on graph- ics.
Enjoy building your kit of this
All-American classic!
Step 14
Parts Included
Step 12
KIT 1912 85191200200
NOTE:
When applying stickers, avoid touching the “sticky” side to prevent finger prints on stickers. Bend sticker sheet slightly to lift edge of sticker & use a fingernail
to lift sticker from sheet. Line up sticker on body and press an edge into place, slowly working sticker with a fingernail until sticker is fully on model.
REMARQUE :
Pendant l’application des autocollants, éviter de toucher à la face collante pour ne pas laisser d’empreintes. Plier légèrement la feuille d’autocollants pour rele-
ver le bord d’un autocollant, et le détacher de la feuille avec le bout d’un ongle. Aligner l’autocollant sur la carrosserie, appuyer pour coller un de ses bords, et
continuer de l’appliquer lentement du bout de l’ongle jusqu’à ce qu’il soit complètement collé sur le modèle réduit.
ANY UNUSED PARTS MAY BE DISCARDED
Sticker Placement Guide
Step 15
Step 13
5
HEADLIGHTS
CLEAR
4L
HEADLIGHT
BEZEL
CHROME
BODY
8
3
4L 18
2
17
5
19
16
12
11
9
10
15
13
4R
SMALL
SCREW
4R
HEADLIGHT
BEZEL
CHROME
AXLES
LARGE
SCREW
PLACE STICKER #22 ON
YOUR “ADVENTURES
BUILT” COLLECTOR
POSTER.
YOU CAN PUT STICKER
#23 ON A BACKPACK,
A NOTEBOOK
OR WHEREVER YOU WANT!
5
SCREWS
12
12
13
13
11
17
9
11 10
18
16
15
19 or 21
14
TIRES
READ BEFORE YOU BEGIN
• CLEAR A SPACE TO WORK ON
• STUDY THE ASSEMBLY DRAWINGS
BEFORE YOU BEGIN
• EACH PLASTIC PART IS IDENTIFIED BY
A PART NUMBER
• DO NOT OVER TIGHTEN SCREWS
• SEE NOTE ABOUT APPLYING STICKERS
IN STEP #15
CAUTION:
POSITION ALL PARTS IN THIS KIT
CAREFULLY. PARTS WILL ONLY
SNAP TOGETHER ONCE.
Á LIRE AVANT DE COMMENCER
• DÉGAGGEZ UN ESPACE POUR TRAVAILLER.
• ÉTUDIEZ LES ÉTAPES DE MONTAGE AVANT
DE COMMENCER.
• CHAQUE PIÉCE EN PLASTIQUE PORTE UN
NUMÉRO DE PIÉCE.
• NE SERREZ PAS TROP LES VIS.
• LISEZ LA RE MARQUE CONCERNANT
L´APPLICATION DES AUTO COLLANTS,
Á L´ ÉTAPE 15.
MISE EN GARDE:
POSITIONNEZ AVEC PRÉCAUTION TOUTES
LES PIÉCES DE CE MODÉLE RÉDUIT, CAR
VOUS NE POUVEZLES EMBOîTER QU’UNE
SEULE FOIS.
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell-Monogram Consumer Service Department, 725 Landwehr Road,
Northbrook, Illinois 60062
Be sure to include the plan number (85191200200), part number, description,
your return address and phone number.
Visit our website: www.revell-monogram.com
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* APPLY STICKERS
*APPLIQUEZ LES AUTO-COLLANTS
* OPTIONAL PARTS
* PIECES EN OPTION
REVELL-MONOGRAM LLC Northbrook, IL. Copyright © 2003. All rights reserved.
ANY UNUSED STICKERS MAY BE DISCARDED
