REVELL KIT 5859 User manual

DECAL PLACEMENT
24
International Orange
Semi Gloss Black
Steel
Titanium
Yellow
White
Aluminum
Silver
Light Gray
Dark Gray
Dark Green
Olive Green
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Métallique
Noir
Acier
Metallisé
Jaune
Blanc
Aluminum
Argent
Gris clair
Gris fonce
Vert fonce
Vert olive
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
F-4C PHANTOM
KIT 5859 85585900200
If you have any questions or comments, call our hotline at: [phone]
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85585900200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
Kit 5859 - Page 16
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
* REPEAT PROCEDURE
* R E P E T E Z L E P R O C E D E
`` ` ` ` `
The F-4 Phantom was devel-
oped and produced by McDonnell
Aircraft and is known for it's out-
standing performance. Among the
fastest, most versatile and pow-
erful aircraft ever built, it can be
recognized by it's characteristic
upswept wingtips and drooping tail.
Your Monogram model features
a detailed cockpit with open or
closed canopy, a standing and
seated pilot figures, optional
ECM and camera pods, gun pod,
Sidewinder and Sparrow missiles
and decal with authentic markings.

FIGURE ASSEMBLY
1
COCKPIT ASSEMBLY
2
DECAL PLACEMENT
23
Kit 5859 - Page 2 Kit 5859 - Page 15
76
PILOT ARM 75
PILOT
77
PILOT
19
SEAT TOP
DARK GRAY
43
SEAT BACK
DARK GRAY
40
REAR
CONTROL STICK
LIGHT GRAY
YELLOW
AND BLACK
STRIPES
LIGHT GRAY
SEMI
GLOSS-
BLACK
SEMI
GLOSS-
BLACK
SEMI
GLIOSS-
BLACK
SEMI
GLOSS-
BLACK
OLIVE GREEN
41
FRONT INSTRUMENT PANEL
LIGHT GRAY
(WITH BLACK INSTRUMENTS)
38
COCKPIT
LIGHT GRAY
1A
DECAL
1
DECAL
16
DECAL
2
DECAL
42
REAR INSTRUMENT PANEL
LIGHT GRAY
(WITH BLACK INSTRUMENTS)
PAINT NOTE FOR PILOTS:
WHITE OR DARK GREEN HELMET WITH
BLACK TRIM, OLIVE GREEN SUIT, DARK
GRAY MASK AND HOSE, BLACK BOOTS,
LIGHT GRAY CHUTE STRAPS WITH SILVER
BUCKLES, BLACK GLOVES.
ADD SEATED PILOT IF DESIRED
39
FRONT
CONTROL STICK
LIGHT GRAY

DECAL PLACEMENT
22 FUSELAGE ASSEMBLY
3
WING ASSEMBLY
4
Kit 5859 - Page 14 Kit 5859 - Page 3
COMPLETED COCKPIT
1
RIGHT
FUSELAGE HALF
2
LEFT
FUSELAGE HALF
LIGHT GRAY
5
RIGHT
WING TOP
3
WING BOTTOM
4
LEFT
WING TOP
WHITE
WHITE
LIGHT
GRAY

FUSELAGE / WING ASSEMBLY
5
STABILIZER ASSEMBLY
6
DECAL PLACEMENT
21
Kit 5859 - Page 4 Kit 5859 - Page 13
FROM REAR SHOWING STABILIZER ANGLE
ALUMINUM
ALUMINUM
60
RIGHT
STABILIZER
12
LEFT
STABILIZER

CANOPY ASSEMBLY
19
FINAL ASSEMBLY
20
AIR RAMP ASSEMBLY
7
FRONT / NOSE GEAR ASSEMBLY
8
Kit 5859 - Page 5
Kit 5859 - Page 12
CLOSED
OPEN
14
RIGHT
INTAKE COVER
WHITE INSIDE
80
WINDSHIELD
FRAME IS
FUSELAGE COLOR
44
ANTENNA
FUSELAGE COLOR
20
MIRRORS
DARK GRAY WITH
SILVER FACE
81
FRONT CANOPY
FRAME IS
FUSELAGE COLOR
83
COCKPIT ARCH
FRAME IS
FUSELAGE COLOR
*
*
*
*
*
DARK GRAY
82
REAR CANOPY
FRAME IS
FUSELAGE COLOR
13
LEFT
INTAKE COVER
WHITE INSIDE
73
LEFT
AIR RAMP
FUSELAGE COLOR
21
SENSOR BULGE
SEMI GLOSS BLACK
WHITE
STEEL
STEEL
45
NOSE
GEAR LOCK
WHITE
34
NOSE
WHEEL DOOR
WHITE
85
ANTENNA
WHITE
55
NOSE
GEAR DOOR
WHITE
(INSIDE ONLY)
36
NOSE GEAR
STRUTWHITE
79
NOSE GEAR
ACTUATOR STRUT
WHITE
37
NOSE WHEELS
SEMI GLOSS BLACK
54
COOLING DUCT
54
COOLING DUCT
74
RIGHT
AIR RAMP
FUSELAGE COLOR
SEMI GLOSS
BLACK
SILVER

WING TANK ASSEMBLY
18
BRAKE / DOOR ASSEMBLY
9
MAIN WHEEL ASSEMBLY
10
MISSILE ASSEMBLY CONTINUED
17
Kit 5859 - Page 6 Kit 5859 - Page 11
COMPLETED
MISSILE
ASSEMBLY
SEE STEP 16
ANGLE OF AIR BRAKES 8
LEFT
AIR BRAKE
RED
(INSIDE ONLY)
9
RIGHT
AIR BRAKE
RED
(INSIDE ONLY)
71
WHEEL DOOR
STRUT
WHITE
31
OUTER
WHEEL HALF
SEMI GLOSS BLACK
32
INNER
WHEEL HALF
SEMI GLOSS BLACK
WHITE
SILVER
SILVER
WHITE
71
WHEEL DOOR
STRUT
WHITE
29
RIGHT
MAIN WHEEL DOOR
WHITE
(INSIDE ONLY)
22
RIGHT MAIN
MAIN GEAR DOOR
WHITE
(INSIDE ONLY)
27
RIGHT
MAIN GEAR STRUT
WHITE
26
LEFT
MAIN GEAR STRUT
WHITE
23
LEFT MAIN
MAIN GEAR DOOR
WHITE
(INSIDE ONLY)
68
WING TANK HALF
DARK GREEN
67
WING TANK HALF
DARK GREEN
30
LEFT
MAIN WHEEL DOOR
WHITE
(INSIDE ONLY)
STEEL
STEEL

FRONT ARMAMENT ASSEMBLY
16
MISSILE ASSEMBLY
17
MAIN WHEEL ASSEMBLY CONTINUED
10
WING FLAP ASSEMBLY
11
Kit 5859 - Page 10 Kit 5859 - Page 7
COMPLETED
MAIN GEARS
SEE STEP 17
OPTIONAL ARMAMENT
LOCATION SHOWN IN
STEPS 16 AND 17
ANGLE OF FLAP
25
LEFT MAIN
GEAR DOOR
WHITE
(INSIDE ONLY)
24
RIGHT MAIN
GEAR DOOR
WHITE
(INSIDE ONLY)
47
STRIKE CAMERA
FUSELAGE COLOR
46
POD RACK
FUSELAGE COLOR
SEMI GLOSS
BLACK
SEMI GLOSS
BLACK
SEMI GLOSS
BLACK
SEMI GLOSS
BLACK
SILVER
86
AIM-9
SIDEWINDER
WHITE
87
MISSILE FIN
WHITE
52 RIGHT 53 LEFT
INBOARD WING PYLON
LIGHT GRAY
78
MISSILE RACK
FUSELAGE COLOR
64
MISSILE RACK
FUSELAGE COLOR
87
MISSILE FIN
WHITE
SILVER
28
MAIN GEAR
RETRACTOR
STRUTS
WHITE
SILVER
6
RIGHT
WING FLAP
7
LEFT
WINGFLAP
17
AIM-7
SPARROWS
WHITE ECM'S

AFTERBURNER ASSEMBLY
12
GUN ASSEMBLY
13
REAR SPARROW ASSEMBLY
14
ECM ASSEMBLY
15
Kit 5859 - Page 8 Kit 5859 - Page 9
ANGLE OF AFTERBURNERS
10
AFTERBURNER
NOZZLE
10
AFTERBURNER
NOZZLE
TITANIUM
TITANIUM
84
CENTERLINE
PYLON
FUSELAGE COLOR
18
AIM-7
SPARROWS
WHITE
57
VULCAN GUN
MUZZLE
STEEL
STEEL
58
GUN POD
TOP HALF
FUSELAGE COLOR
59
GUN POD
BOTTOM HALF
FUSELAGE COLOR
51
ECM POD
RIGHT HALF
WHITE
48
ECM POD
RIGHT HALF
WHITE
SEMI GLOSS
BLACK
SEMI GLOSS
BLACK
50
ECM POD
LEFT HALF
WHITE
49
ECM POD
LEFT HALF
WHITE

AFTERBURNER ASSEMBLY
12
GUN ASSEMBLY
13
REAR SPARROW ASSEMBLY
14
ECM ASSEMBLY
15
Kit 5859 - Page 8 Kit 5859 - Page 9
ANGLE OF AFTERBURNERS
10
AFTERBURNER
NOZZLE
10
AFTERBURNER
NOZZLE
TITANIUM
TITANIUM
84
CENTERLINE
PYLON
FUSELAGE COLOR
18
AIM-7
SPARROWS
WHITE
57
VULCAN GUN
MUZZLE
STEEL
STEEL
58
GUN POD
TOP HALF
FUSELAGE COLOR
59
GUN POD
BOTTOM HALF
FUSELAGE COLOR
51
ECM POD
RIGHT HALF
WHITE
48
ECM POD
RIGHT HALF
WHITE
SEMI GLOSS
BLACK
SEMI GLOSS
BLACK
50
ECM POD
LEFT HALF
WHITE
49
ECM POD
LEFT HALF
WHITE

FRONT ARMAMENT ASSEMBLY
16
MISSILE ASSEMBLY
17
MAIN WHEEL ASSEMBLY CONTINUED
10
WING FLAP ASSEMBLY
11
Kit 5859 - Page 10 Kit 5859 - Page 7
COMPLETED
MAIN GEARS
SEE STEP 17
OPTIONAL ARMAMENT
LOCATION SHOWN IN
STEPS 16 AND 17
ANGLE OF FLAP
25
LEFT MAIN
GEAR DOOR
WHITE
(INSIDE ONLY)
24
RIGHT MAIN
GEAR DOOR
WHITE
(INSIDE ONLY)
47
STRIKE CAMERA
FUSELAGE COLOR
46
POD RACK
FUSELAGE COLOR
SEMI GLOSS
BLACK
SEMI GLOSS
BLACK
SEMI GLOSS
BLACK
SEMI GLOSS
BLACK
SILVER
86
AIM-9
SIDEWINDER
WHITE
87
MISSILE FIN
WHITE
52 RIGHT 53 LEFT
INBOARD WING PYLON
LIGHT GRAY
78
MISSILE RACK
FUSELAGE COLOR
64
MISSILE RACK
FUSELAGE COLOR
87
MISSILE FIN
WHITE
SILVER
28
MAIN GEAR
RETRACTOR
STRUTS
WHITE
SILVER
6
RIGHT
WING FLAP
7
LEFT
WINGFLAP
17
AIM-7
SPARROWS
WHITE ECM'S

WING TANK ASSEMBLY
18
BRAKE / DOOR ASSEMBLY
9
MAIN WHEEL ASSEMBLY
10
MISSILE ASSEMBLY CONTINUED
17
Kit 5859 - Page 6 Kit 5859 - Page 11
COMPLETED
MISSILE
ASSEMBLY
SEE STEP 16
ANGLE OF AIR BRAKES 8
LEFT
AIR BRAKE
RED
(INSIDE ONLY)
9
RIGHT
AIR BRAKE
RED
(INSIDE ONLY)
71
WHEEL DOOR
STRUT
WHITE
31
OUTER
WHEEL HALF
SEMI GLOSS BLACK
32
INNER
WHEEL HALF
SEMI GLOSS BLACK
WHITE
SILVER
SILVER
WHITE
71
WHEEL DOOR
STRUT
WHITE
29
RIGHT
MAIN WHEEL DOOR
WHITE
(INSIDE ONLY)
22
RIGHT MAIN
MAIN GEAR DOOR
WHITE
(INSIDE ONLY)
27
RIGHT
MAIN GEAR STRUT
WHITE
26
LEFT
MAIN GEAR STRUT
WHITE
23
LEFT MAIN
MAIN GEAR DOOR
WHITE
(INSIDE ONLY)
68
WING TANK HALF
DARK GREEN
67
WING TANK HALF
DARK GREEN
30
LEFT
MAIN WHEEL DOOR
WHITE
(INSIDE ONLY)
STEEL
STEEL

CANOPY ASSEMBLY
19
FINAL ASSEMBLY
20
AIR RAMP ASSEMBLY
7
FRONT / NOSE GEAR ASSEMBLY
8
Kit 5859 - Page 5
Kit 5859 - Page 12
CLOSED
OPEN
14
RIGHT
INTAKE COVER
WHITE INSIDE
80
WINDSHIELD
FRAME IS
FUSELAGE COLOR
44
ANTENNA
FUSELAGE COLOR
20
MIRRORS
DARK GRAY WITH
SILVER FACE
81
FRONT CANOPY
FRAME IS
FUSELAGE COLOR
83
COCKPIT ARCH
FRAME IS
FUSELAGE COLOR
*
*
*
*
*
DARK GRAY
82
REAR CANOPY
FRAME IS
FUSELAGE COLOR
13
LEFT
INTAKE COVER
WHITE INSIDE
73
LEFT
AIR RAMP
FUSELAGE COLOR
21
SENSOR BULGE
SEMI GLOSS BLACK
WHITE
STEEL
STEEL
45
NOSE
GEAR LOCK
WHITE
34
NOSE
WHEEL DOOR
WHITE
85
ANTENNA
WHITE
55
NOSE
GEAR DOOR
WHITE
(INSIDE ONLY)
36
NOSE GEAR
STRUTWHITE
79
NOSE GEAR
ACTUATOR STRUT
WHITE
37
NOSE WHEELS
SEMI GLOSS BLACK
54
COOLING DUCT
54
COOLING DUCT
74
RIGHT
AIR RAMP
FUSELAGE COLOR
SEMI GLOSS
BLACK
SILVER

FUSELAGE / WING ASSEMBLY
5
STABILIZER ASSEMBLY
6
DECAL PLACEMENT
21
Kit 5859 - Page 4 Kit 5859 - Page 13
FROM REAR SHOWING STABILIZER ANGLE
ALUMINUM
ALUMINUM
60
RIGHT
STABILIZER
12
LEFT
STABILIZER

DECAL PLACEMENT
22 FUSELAGE ASSEMBLY
3
WING ASSEMBLY
4
Kit 5859 - Page 14 Kit 5859 - Page 3
COMPLETED COCKPIT
1
RIGHT
FUSELAGE HALF
2
LEFT
FUSELAGE HALF
LIGHT GRAY
5
RIGHT
WING TOP
3
WING BOTTOM
4
LEFT
WING TOP
WHITE
WHITE
LIGHT
GRAY

FIGURE ASSEMBLY
1
COCKPIT ASSEMBLY
2
DECAL PLACEMENT
23
Kit 5859 - Page 2 Kit 5859 - Page 15
76
PILOT ARM 75
PILOT
77
PILOT
19
SEAT TOP
DARK GRAY
43
SEAT BACK
DARK GRAY
40
REAR
CONTROL STICK
LIGHT GRAY
YELLOW
AND BLACK
STRIPES
LIGHT GRAY
SEMI
GLOSS-
BLACK
SEMI
GLOSS-
BLACK
SEMI
GLIOSS-
BLACK
SEMI
GLOSS-
BLACK
OLIVE GREEN
41
FRONT INSTRUMENT PANEL
LIGHT GRAY
(WITH BLACK INSTRUMENTS)
38
COCKPIT
LIGHT GRAY
1A
DECAL
1
DECAL
16
DECAL
2
DECAL
42
REAR INSTRUMENT PANEL
LIGHT GRAY
(WITH BLACK INSTRUMENTS)
PAINT NOTE FOR PILOTS:
WHITE OR DARK GREEN HELMET WITH
BLACK TRIM, OLIVE GREEN SUIT, DARK
GRAY MASK AND HOSE, BLACK BOOTS,
LIGHT GRAY CHUTE STRAPS WITH SILVER
BUCKLES, BLACK GLOVES.
ADD SEATED PILOT IF DESIRED
39
FRONT
CONTROL STICK
LIGHT GRAY

DECAL PLACEMENT
24
International Orange
Semi Gloss Black
Steel
Titanium
Yellow
White
Aluminum
Silver
Light Gray
Dark Gray
Dark Green
Olive Green
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Métallique
Noir
Acier
Metallisé
Jaune
Blanc
Aluminum
Argent
Gris clair
Gris fonce
Vert fonce
Vert olive
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
F-4C PHANTOM
KIT 5859 85585900200
If you have any questions or comments, call our hotline at: [phone]
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85585900200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
Kit 5859 - Page 16
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
* REPEAT PROCEDURE
* R E P E T E Z L E P R O C E D E
`` ` ` ` `
The F-4 Phantom was devel-
oped and produced by McDonnell
Aircraft and is known for it's out-
standing performance. Among the
fastest, most versatile and pow-
erful aircraft ever built, it can be
recognized by it's characteristic
upswept wingtips and drooping tail.
Your Monogram model features
a detailed cockpit with open or
closed canopy, a standing and
seated pilot figures, optional
ECM and camera pods, gun pod,
Sidewinder and Sparrow missiles
and decal with authentic markings.