RevJams STUDIO TWS User manual

True Wireless Stereo Sport Earbuds
USERS GUIDE
TWS

Thank you for choosing the RevJams Studio
True Wireless Bluetooth Stereo Sport
Earbuds.
Please take the time to read this manual
carefully, even if you are already familiar
with a similar product.
This product is compatible with all
Bluetooth enabled devices.
2

• RevJams Studio True Wireless
Bluetooth Stereo Sport Earbuds (L+R)
• Micro USB Y charging cable
• 3 sets of ear bud tips (S,M,L)
• Users guide
PACKAGE CONTENTS:
L R
3

1. Multi-Function Button - Power/ Pair/ Call
Functionalities- Answer/ End/ Redial/
Reject Call/ Music functionalities- Play/
Pause/ Track selection
2. Microphone
3. Micro USB charging port
4. LED Indicator
HEADSET CONTROLS:
324 1
4

To start using your RevJams Studio True
Wireless Bluetooth Stereo Earbuds, please
follow the steps below:
1. Ensure your Bluetooth Earbuds are fully
charged.
2. Pair your Bluetooth Earbuds to a
Bluetooth-enabled device prior to use.
(See Pairing your Headset instructions)
GETTING STARTED
5

Your RevJams Studio True Wireless Bluetooth
Stereo Earbuds come with a built-in
rechargeable battery and a Micro USB Y
charging cable. Charge fully before use.The
battery indicator will turn red when charging
and turn Blue once charging is complete.
Initial charging time is approximately 2 hours.
CHARGING YOUR HEADSET
Appx. 2 hours
1
2
6

Your RevJams Studio TWS Bluetooth Stereo
Earbuds are True Wireless Earbuds that
require that the earbuds be paired to each
other as well as to your Bluetooth enabled
device in order to achieve stereo sound from
both earbuds.
There are 2 WAYS to pair your earbuds to your
Bluetooth device.
FIRST METHOD
1. Press and hold down the Multi-function
button on both earbuds (L+R) simultaneously
for approximately 3-4 seconds until both
earbuds’ LED indicator flash blue and red
alternately. The earbuds will automatically
pair to each other. After a few seconds the
Right earbud’s LED indicator will flash blue
and red alternately while the Left earbud’s
LED indicator will flash blue confirming
pairing success.
2. Activate your mobile phone's Bluetooth
pairing function and select “RevJams Studio”
from the list of available Bluetooth devices to
connect. A voice prompt will confirm your
Bluetooth connection.
PAIRING YOUR HEADSET
7

(If you are prompted for a Passcode enter “0000” and
press “ok” to pair the headset with your mobile phone)
SECOND METHOD:
1. Press and hold down on the Right earbud’s
Multi-function button for approximately 5-7
seconds until the blue and red LED indicator
light flashes alternately, then activate your
mobile phone's Bluetooth pairing function and
select “RevJams Studio” from the list of
available devices to connect.
2. Press down on the Left earbud’s
Multi-function button for approximately 3-4
seconds until the blue LED indicator light
flashes. The earbuds will automatically pair to
each other. After a few seconds both earbud’s
LED indicator will slowly flash blue confirming
your Bluetooth connection and pairing success.
Settings
Bluetooth
Bluetooth
RevJams
Studio
100% PRESS & HOLD
3-4 seconds
8

Press and hold down the Multi-Function
button for 3 seconds until a blue light appears.
POWERING ON THE HEADSET
Once powered on, Press and hold down the
Multi-Function button for 4 seconds until a red
light appears.
POWERING OFF THE HEADSET
PRESS & HOLD
3 seconds
PRESS & HOLD
4 seconds
9

The Left / Right indicator is located on the
inside of the earbuds.
Because everyone’s ears are different, be sure
to try all sizes of earbud tips. Only with the
right size earbud tips will you enjoy a snug fit
& premium sound quality.
The silicone ear hook attached to each earbud
should fit just under your ear ridge for
additional support.
WEARING YOUR HEADSET
RightLeft
10