Rexing W202 Mini User manual

W202 Mini
User Manual
The information in this manual is subject to change without notice.
www.rexingusa.com

2

3
Safety information
To prevent injury to yourself or others, or damage to your device, read all safety
information before using.
Warning
Failure to comply with safety warnings and regulations can result in serious injury or
death.
REXING Dash Cam is not intended to be touched, modified, or calibrated while operating
a vehicle. REXING is not responsible for any damages resulting from the user's misuse of
the camera.
Do not use damaged power cords or plugs, or loose electrical sockets. Faulty
connections can cause electric shock or fire.
Do not touch the car charger with wet hands or disconnect the charger by pulling the
cord. Doing so may result in electrocution.
Do not use a bent or damaged car charger. Doing so may cause electric shock or fire.
Do not use your device while it is charging or touch your device with wet hands. Doing
so may cause electric shock.
Use only manufacturer-approved chargers, accessories, and supplies.

4
- Use only the manufacturer-approved charger specifically designed for your device.
Using an incompatible charger can cause serious personal injury or damage to your
device.
- REXING cannot be responsible for the user's safety when using accessories or supplies
that are not approved by REXING.
Do not drop the charger or device, or subject them to impact. Handle and dispose of the
charger and device with care.
- Never crush or puncture the device.
- Never dispose of the device in a fire.
- Never place the device in or on heating devices, such as microwave ovens, stoves, or
radiators. The device may explode if overheated. Follow all local regulations when
disposing of a used device.
- Avoid exposing the device to high external pressure, which can lead to an internal short
circuit and overheating.
Protect the device and charger from damage.
- Avoid exposing your device to excessive cold or heat. Extreme temperatures can
damage the device and reduce the charging capacity and life of your device.
- Do not allow children or animals to bite or chew the device. Doing so can result in fire
or explosion, and small parts can be a choking hazard. If children use the device, make
sure they use the device properly.
- Never use a damaged charger.

5
Caution
Failure to comply with safety precautions and regulations can result in property damage,
serious injury or death.
Do not use your device near other electronic devices. Most electronic devices use radio
frequency signals. Your device may interfere with other nearby electronic devices.
Do not use your device near other devices that emit radio signals, such as sound systems
or radio towers. Radio signals from these may cause your device to malfunction.
Do not expose the device to heavy smoke or fumes. Doing so may damage the outside of
the device or cause it to malfunction.
If you notice strange smells or sounds coming from your device, or if you see smoke or
liquid leaking from the device, stop using the device immediately and take it to a REXING
Service Center. Failure to do so may result in fire or explosion.
For your own safety, do not operate the controls of this product while driving. The
window mount is needed when using the dash cam in a car. Make sure that you place
the dash cam in a location where it will not obstruct the driver's view.
Always keep the camera lens clean, and ensure that the lens is not blocked by any object
or placed near any reflective material. If the car's windshield is tinted with a dark coating,
recording quality may be affected.

6
Your device is recommended for use and store within a temperature range of 15
degrees Fahrenheit to 150 degrees Fahrenheit, and a humidity range of 10% to 80%.
If your device becomes overheated, allow it to cool down before use. Prolonged
exposure of skin to an overheated device may cause low-temperature burn symptoms,
such as red spots or areas of darker pigmentation.
Install mobile devices and equipment with caution.
- Ensure that any mobile devices or related equipment installed in your vehicle are
securely mounted.
- Avoid placing your device and accessories in or near an airbag deployment area.
Improperly installed wired equipment can cause serious injury in a situation where
airbags inflate rapidly.
Do not drop your device or subject your device to impact. If the device is bent, deformed
or damaged, malfunction may occur.
Do not attempt to disassemble, repair, or modify your device.
- Any changes or modifications to your device can void your manufacturer's warranty. If
your device needs servicing, take it to an authorized REXING Service Center.
Clean your device and charger by wiping with a towel or eraser. Do not use chemicals or
detergents. Doing so can discolor or corrode the outside of the device, and may result in
electric shock or fire.
Do not distribute copyright-protected material. Doing so without the permission of the
content owners may violate copyright laws. The manufacturer is not responsible or
liable for any legal issues that result from the user's illegal use of copyrighted material.

7
Correct disposal of this product
(applicable in countries with separate waste collection systems)
Waste Electrical & Electronic Equipment
This symbol, found on the device, accessories or accompanying literature, indicates that
the product and its electronic accessories (e.g. charger, headset, USB cable) should not
be disposed of with other household waste.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for information on where and how they can take these
items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.

8
Disclaimer
Some content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal non-commercial use.
You may not use any content or services in a manner that has not been authorized by
the content owner or service provider. Without limiting the foregoing, unless expressly
authorized by the applicable content owner or service provider, you may not modify,
copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit,
or distribute in any manner or medium any content or services displayed through this
device.
"THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." REXING DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR
ANY PURPOSE. REXING EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. REXING DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE
AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL REXING BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY
FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH,
ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY CONTENT OR
SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES."

9
Third party services may be terminated or interrupted at any time, and REXING makes
no representation or warranty that any content or service will remain available for any
period of time. Content and services are transmitted by third parties by means of
networks and transmission facilities over which REXING has no control. Without limiting
the generality of this disclaimer, REXING expressly disclaims any responsibility or liability
for any interruption or suspension of any content or service made available through this
device.
REXING is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should
be made directly to the respective content and service providers.
Warm Prompt
We recommend that you carefully read this manual before using the dash cam, then
read it again with the dash cam in your hands as this will help you to familiarize yourself
with its many features. The dash cam is constantly improved over time, so the
specification of the dash cam may change.
Please note that each button has multiple functions so please be careful which Buttons
you press in relation to each Mode / Function. There is no need to get frustrated
because you should only do this once in order to set it up in the way that you require.
1. Please ensure that the dash cam is SWITCHED OFF when you either insert or remove a
Micro SD Card, in order to avoid damage.

10
2. Please ensure that the Micro SD Card is inserted in the right way. If it is
inserted backwards, it might damage the dash cam and Card.
3. If the Micro SD Card is not compatible with the dash cam, please DO
NOT insert it again, as you will damage the Card and the dash cam. Please
buy the correct card and then try again.
4. The dash cam supports the Micro SD card from 32GB to the highest 128GB, Class 10
only.
5. Adjust the position of the lens to ensure that you correctly record what you want.
6. We recommend a 32 GB Class 10 Micro SD Card for this dash cam.
7. In video recording mode, if you want to press Menu / Mode button, please stop
recording videos first by pressing the REC button.
8. We recommend using default factory settings, once the MENU has been set, then
connect the car charger to the unit and put into the card. Once the car is started, the
unit will automatically start recording. Once the car turns off, the unit will
automatically stop recording. Please note that your vehicle’s Cigarette Lighter Sockets
do not have any power when the ignition is switched OFF.
9. This dash cam must be continuously connected to a power supply via a 5V Charger
because there is no built-in battery.
10. If you turn the option of SCREEN SAVER ON, in video recording mode, when the
screen is switched Off, the dash cam is still recording. You can turn the screen on by
pressing power button.

11
11. If you want to playback the videos, we recommend unplugging your micro SD card
and plugging into your PC with card reader. We recommend using VLC Video player
on
Windows OS, and Movist + VLC on MAC OS.
12. After several weeks of daily recording it may be necessary for you to format your
Micro SD Card - if that is the case, please note that you will lose all of your files, so
please back up a copy on your computer first in a unique dash cam Folder that you
have created.
13. When your dash cam crashes / screen goes black, the phenomenon may be caused
by
improper operation, crash, please press the R = Reset button, hole by the top corner,
gently with a cocktail stick. Just like you would do for a computer, printer, phone,
etc.
14. Dash cam only supports the micro SD card with the FAT32 file format. If you use the
64GB or 128GB card, you must format your micro SD card on the dash cam before
you
can use it.
15. We recommend formatting your micro SD card once a month, and replace the micro
SD card every three months because the memory card has a certain number of reads
and writes, if it reaches the numbers, the micro SD card can't be used.
16. Please use Samsung EVO or SanDisk High Endurance Micro SD Card. Please don't use
SanDisk Ultra cards with our cameras.

12
Device Layout

13
Button
Functions
• Press to turn on and off screen
• Press and hold 3 seconds to turn the device on or off
• Press to confirm a selection while in Setting Mode
• Recording Mode Hot Key: Emergency Lock
(Press to manually lock the file during recording)
• Stop recording first, press and hold for about 2
seconds to display the GPS information
•In standby mode (stop recording first), press
ONE/TWICE to enter settings, press again to EXIT
•Press and hold for about 3 seconds to switch between
Recording / Photo / Playback modes
• Press to navigate UP through options in Settings Mode
• Recording Mode Hot Key: Record (Press to start / stop
recording)
•Stop recording first, press and hold for about 2
seconds to turn on/off the WiFi feature
• Press to navigate DOWN through options in Settings
Mode
• Press to mute / un-mute the microphone
•Press to switch screen between front, inside, picture
in picture
•Infrared Light- Press and hold for about 2 seconds to
turn on/off the Infrared Light
RESET
Press and hold for 7 seconds to reset the device in the
event that it operates erratically, hangs up, or freezes

14
Installation
1. Attaching the camera to the window mount
Before the device can be used in a car, it is essential to first install a
properly attached window mount. Make sure that you place the
recorder in a safe, appropriate location where it will not obstruct the
driver’s view.
2. Connecting the charger to the car's 12V DC outlet
Be sure to connect only the REXING-approved at least a 2A charger
designed and supplied specifically for use with your device. Using an
incompatible charger can cause serious personal injury or damage to
your device.
3. Inserting a memory card
You will need to insert a memory card before you can begin recording.
The recorder supports Micro SD cards with a capacity of up to 128GB.
For reliable operation, use a Class 10 memory card with a capacity of
at least 32GB.
DO NOT insert or remove a memory card while the device is in
operation.

15
Inserting the memory card
Your device accepts memory cards with a maximum capacity of 128GB.
Depending on the memory card manufacturer and type, some cards
may not be compatible with your device. Using an incompatible card
may damage the device or the memory card, or corrupt the data
stored on it.
Please let the screen of the dash cam face you.
•Insert memory card with the gold-colored contacts facing you.
•Push the memory card into the slot until it locks in place.
It is recommended that you reformat a memory card after every time
that images are transferred from it to a computer, or at least once a
month.
Reformatting a memory card keeps important elements of data and file
structure clean, helping to prevent error messages and missing images.
Reformatting also restores the memory card, which can help prevent it
from becoming corrupted.

16
Removing the memory card
Before removing a memory card from your dash cam, you must first
unmount it for safe removal.
Before removing a memory card from your device:
1. Press the REC button to stop the device from recording
2. Press and hold the ON/OFF button to switch off the device
3. Gently push the memory card in and let go until it unlocks
Do not remove the memory card while the device is transferring or
accessing information. Doing so can result in data loss or corruption, or
damage to the memory card or device. REXING is not responsible for
losses that result from the use of damaged memory cards, including
the loss of data.
Formatting the memory card

17
We recommend formatting the card on dash cam before using.
1. Press the REC button to stop the device from recording
2. Press the MENU button twice to enter System Settings
3. Press the DOWN button to navigate to the "Format" option
4. Press OK to confirm your selection
5. Press the UP button once
6. Press OK when the word YES is highlighted in blue
Before formatting a memory card, always remember to make backup
copies of all important data stored on the device. The manufacturer’s
warranty does not cover loss of data resulting from user actions.
Resolution
Use the following procedure to set the recording resolution:
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Resolution" option
3. Press OK to view available resolutions:
FHD P30 + FHD P30 (1080P+1080P, 30fps, dual channel)
HD P30 + HD P30 (720P+720P, 30fps, dual channel)
UHD P24 (2196P, 24fps, single channel)
QHD P30 (1440P, 30fps, single channel)
FHD P60 (1080P, 60fps, single channel)
FHD P30 (1080P, 30fps, single channel)
HD P60 (720P, 60fps, single channel)
HD P30 (720P, 30fps, single channel)
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings

18
Loop Recording
With Loop Recording Mode enabled, the device will continuously erase
older video as it records new video, keeping only the images captured
over a user-selected time range. All video older than this range will be
replaced with new video. (Note: any locked video files on the memory
card will remain protected, and will not be automatically deleted
during Loop Recording.)
It is recommended that you reformat a memory card after every time
that images are transferred from it to a computer, or at least once a
month. This keeps important elements of data and file structure clean,
helping to prevent error messages and missing images.
Remember to always make backup copies of all important data stored
on the device. The manufacturer’s warranty does not cover loss of data
resulting from user actions.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Loop Recording"
option
3. Press OK to view the current selection: 1min / 3min / OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
WDR (Wide Dynamic Range)

19
When enabled, this feature automatically adjusts exposure settings to
improve recording quality in particularly bright or dim environments,
providing balanced lighting and clearer recorded video.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "WDR" option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
Exposure
Adjust the camera exposure value for brighter or darker recorded
video, according to your preference.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Exposure" option
3. Press OK to view the current selection: +0.0, +1/3, -1/3, etc.
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
Record Audio
You may choose to record audio with video, or turn off the microphone
so that all recorded videos will be muted.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Record Audio"
option

20
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
Alternatively, you can use a hot key shortcut for this feature. During
Recording Mode, press the DOWN button to mute / unmute the
microphone for video recording.
Date Stamp
You have the option to display the date and time in your videos. Note
that the date and time stamp cannot be removed from videos if this
feature was enabled at the time of recording.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Date Stamp"
option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
Gravity Sensing
Default setting: Low
If a change in gravitational forces is detected, such as in the event of a
vehicular accident, the g-sensor will signal to the camera, and an
automatic file lock will be placed on the current video, preserving your