Rexing P1 User manual

P1
User Manual
ユーザーマニュアル
The information in this manual is subject to change
without notice.
www.rexingusa.com 20Rev1

32
About This Manual
This device provides high-quality digital recording using
Rexing’s high standards of design, construction and
technological expertise. This user manual describes the
device’s functions and features in detail. Please read this
manual before using the device to ensure safe and proper
use. Note that all descriptions included here are based on
the device’s default settings.
• Images and screenshots may dier in appearance
from the actual product. Content may dier from the
nal product or from software provided by service
providers and is subject to change without prior
notice.
• For the latest version of this manual, refer to the
Rexing website at www.rexingusa.com/support/
product-support
• Available features and additional services may vary by
device and software.
• Applications and their functions may vary by country,
region, or hardware specications.
• Rexing is not liable for performance issues caused by
applications from any provider other than Rexing.
• Rexing is not liable for performance issues or
incompatibilities caused by failure to install the device
www.rexingusa.com/support/registration/
as stated in this manual. Attempting to customize
the installation may cause the device or applications
to work improperly which may result in device
malfunctions and data corruption or loss. These
actions are violations of your Rexing agreement and
will void your warranty.
• Default applications that come with the device are
subject to updates and possible discontinuation of
support without prior notice. If you have questions
about an application provided with the device, contact
an authorized Rexing Service Center.
/rexingusa
@rexingdashcam

54
Table of Contents
About This Manual
Table of Contents
1. What’s in the box?
2. Camera Overview
3. LCD Screen Indications
4. Charging the Device
5. Basic Operation
6. Camera Shooting
7. Product Parameters
8. Troubleshooting
9. Name and Content Identication of Toxic or
Harmful Substances or Elements
page
2
4
6
8
10
11
12
18
24
26
27
目次
概要
1.本製品の同梱物
2.カメラの概要
3.LCDディスプレイ指示アイコン
4.デバイスの充電
5.基本操作
6.録画
7.製品仕様
8 . トラブ ル シュ ー ティング
9.有毒有害物質/元素の名称と含有量
page
28
30
32
34
35
36
43
50
52
53
page

76
1. What’s in the box?
The items supplied with the device and any available
accessories may vary depending on your region.
Appearances and specications are subject to change
without prior notice. Availability of accessories is subject
to change.
All supplied items are designed for use only with this
device and may not be compatible with other devices.
Malfunctions resulting from the use of unapproved
accessories are not covered by the warranty service.
For more information about available accessories, refer to
www.rexingusa.com.
1. Rexing P1 Body Camera
2. Power Adapter
3. Shoulder Mount
4. Chest Mount
5. USB Cable
6. User Manual
7. Safety Guide
REXING P1 — What’s in the box
1 2
5
6 7
3
4
P1
User Manual
ユーザーマニュアル
The information in this manual is subject to change
without notice.
www.rexingusa.com 20Rev1
Safety Guide
安全ガイド
www.rexingusa.com

98
RR
OK
2. Camera Overview
Device Layout
1. Camera Shooting Key
2. Voice Recording Key
3. Scroll UP Key
4. Scroll DOWN Key
5. Red Flashing Light
6. IR Light
7. White Light
8. Power Indicator Light
9. Microphone
10. Blue Flashing Light
11. IR Light
12. COMOS
13. Working Indicator Light
14. Camerra Shooting Key
15. Speaker
16. Picture Taking Key
17. Mini USB Port
18. Power Switch
19. Reset Key
20. Display
21. Menu Key
22. Enter Key
23. Return Key
1
510
712
14
15
22
9
611
813
2
3
4
R
16
19
20
21
17
18 23

1110
REXING P1 — CHARING DEVICE
USB charging mode
(input voltage DC5V-1A)
HD 16:00:14
57.6G
PID: 000001 DSJ-D1: 000001
2020/03/02 16:20:52
HD 00:00:04
57.6G
2020/03/02 16:20:52
REXING P1 — LCD Screen
HD 16:00:14
57.6G
PID: 000001 DSJ-D1: 000001
2020/03/02 16:20:52
HD 00:00:04
57.6G
2020/03/02 16:20:52
REXING P1 — LCD Screen
3. LCD Screen Indications
12
5
3
4
9
6 7 8
10
1. Video Shoot Resolution
2. Memory Time Remaining
3. Available Memory Space
4. Police ID Number
5. Device ID Number
6. System Date
7. System Clock
8. Battery Level Icon
9. IR Light Indicator
10. Current Video Duration
4. Charging the Device
The device can be charged in the following
two ways:
1. Connect the device to its charger where shown.
2. Connect the device to a computer.
As shown in the gure above, charge the device by
connecting it to a computer with the USB cable. When
charging, the working indicator light shows green, and
the power indicator light shows blue. The indicator lights
extinguish after charging.

1312
Power on
With the camera is in its power-o state,
press the ON/OFF key to start the device.
The device displays a preview screen after
starting. The working indicator light turns
green. If no operation is performed within
60 seconds after starting, the device enters
screen saver mode as its default. The
device automatically enters screen saver
mode 60 seconds after it starts to shoot.
5. Basic Operation
Power off
With the camera in its power-on state, depress
the ON/OFF key to power o the device. All indicator
lights will extinguish. Press the ON/OFF key to enter
screen saver mode.
Standby
With the camera in its power-on state, if no operation is
performed within 60 seconds after starting, the device
automatically enters screen saver mode; in this mode,
the screen goes o and the working indicator light turns
green. Press any key to illuminate the screen.
Menu Setup
With the camera in its standby state, press the MENU
key to enter the MENU setup interface. Press the UP or
DOWN key to select the desired function. Press the OK
key to conrm your option. Use the UP or Down key to
change your option. Press the OK key again to conrm
your selection(s). The device automatically saves any
setup changes. Detailed system options are not described
hereinafter. The screen display is shown below:
ON/OFF
OK
MENU
Up
Down
Settings
Video Resolution
Photo Resolution
LED
Video Time
Sound Cue
REXING P1 — LCD Screen
RR
OK

1514
Video shoot resolution
Press the OK key to enter the to-be-altered function.
Press the UP or DOWN key to select a value from the
following: 1920x1080P 30FPS, 1280x720P 30FPS, or
800x600P 30FPS. The system default is 1280x720P
30FPS. Press the OK key to conrm your selection.
Picture taking resolution
Press the OK key to enter the to-be-altered function.
Press the UP or DOWN key to select a value from the
following: 8000X4500, 5200X3900, 4608X3456, and
4000X3000. The system default is 5200X3900.
Press the OK key to conrm your selection.
IR switching
Press the OK key to enter the to-be-altered function.
Press the UP or DOWN key to select between Auto and
Manual. The system default is Manual. Press the OK key
to conrm your selection.
Video-shooting duration
Press the OK key to enter the to-be-altered function.
Press the UP or DOWN key to select a value from the
following: 1, 2, 3, 5, 10, 20, or 30 minutes. The system
default is 5 minutes.
Press the OK key to conrm your selection.
Voice prompt
Press the OK key to enter the to-be-altered function.
Press the UP or DOWN key to select between ON and
OFF. The system default is ON.
Press the OK key to conrm your selection.
Timed power-off
Press the OK key to enter the to-be-altered function.
Press the UP or DOWN key to select a value from the
following: 1, 3, 5 and 10 minutes. The system default is
3 minutes. Press the OK key to conrm your selection.
Loop recording
When this function is ON, old video les will be overwritten
when memory is insucient. Press the OK key to enter
the to-be-altered function. You can select ON or OFF.
The system default is ON. Press the OK key to conrm
your selection.
On-board mode
Press the OK key to enter the to-be-altered function.
Press the UP or DOWN key to select between ON and
OFF. The system default is OFF. Press the OK key to
conrm your selection.

1716
Auto screen off
When this function is enabled, the screen will be powered
o at a set time. Press any key to restore power to the
screen. Press the OK key to enter the to-be-altered
function. Press the UP or DOWN key to select a value
from the following: 1, 3, and 5 minutes. The system
default is 1 minute. Press the OK key to conrm your
selection.
Factory setup
Press the OK key to enter the to-be-altered function.
Press the UP or DOWN key to select between YES or NO.
The system default is NO. Press the OK key to conrm
your selection.
Password setup
Press the OK key to enter the password entry function.
The system default password is six zeros (000000). Input
a password to modify it. Press the UP or DOWN key to
key in specic inputs. Press the OK key to conrm your
password.
Police ID setup
Press the OK key to enter the password entry function.
The system default password is six zeros (000000). Input
current a password to change the police ID. Press the UP
or DOWN key to key in specic inputs. Press the OK key
to conrm your password.
Time setup
Press the OK key to enter the password entry function.
The system default password is six zeros (000000). Input
your current password to modify the time. Press the UP
or DOWN key to key in specic inputs. Press the OK key
to conrm your input.
Machine code setup
Press the OK key to enter the password entry function.
The system default password is six zeros (000000). Input
your current password to change machine code. Press
the UP or DOWN key to key in specic inputs. Press the
OK key to conrm your input.
Language
Press the OK key to enter the to-be-altered function.
Press the UP or DOWN key to select between English
and Chinese. The system default is Chinese. Press the OK
key to conrm your selection.
System information
Press the OK key to view system information.

1918
6. Camera Shooting
Camera shooting
Press the VIDEO key under the preview
screen in the power-on state, or depress
the VIDEO key for 3 seconds in the power-
o state to start camera shooting. The
red indicator light in upper right corner
starts to ash slowly during recording,
and, together with the red time indication,
shows recording duration. The operating
status indicating light turns red and starts
to ash. Press the VIDEO key again
to stop camera shooting. The working
indicator light turns green; the video le
is automatically saved to the TF card, the
screen goes back to shooting preview, and
the video le is saved to the memory card
with a time indication and AVI as its sux.
To check the video, refer to the section
Video Review/Playback.
VIDEO
RECORD
PHOTO
Video lockup
Depressing the VIDEO key during camera shooting can
lock up the current video. Depress the VIDEO key again to
unlock it. The camera shooting function is not interrupted
during this process. A locked video cannot be deleted
under the loop recording mode.
Solo voice recording
In the power-on state, Press the
RECORD key under the preview screen
or depress the key for 3 seconds to
start solo voice recording. The screen
shows a recording symbol during
recording. The working indicator light
turns orange and starts to ash. Press
the RECORD key again to stop solo
recording and the working indicator
light turns green. The audio le is
automatically saved to the TF card. The
screen goes back to preview.
Taking pictures
In the power-on state, Press the
PHOTO key under the preview screen
to take a picture; the picture is saved
automatically. There is an audible snap
when taking a picture. A picture is taken
with each press of the PHOTO key.
These pictures are saved to the memory
card with a time indication and JPG as
the sux. To check the pictures, refer
to the section Video Review/Playback.

2120
IR Night Vision Mode
Default IR night vision mode is a Manual function
and the IR night vision indicator is o after starting the
device. The optical lter switch uses a color lter, which
is suitable for application at daytime. Use the optical
lter switch to manually switch to IR night vision mode
at night. In the power-on state, hold the UP key under
the preview screen to enable IR mode. Now the IR light
is ON and shows red. The image changes into a black
and white image under the preview screen or during
camera shooting. Hold the UP key again to turn o the
IR mode. Now the IR light is OFF and the image restores
color image under the preview screen or during camera
shooting. Pressing the UP key allows you to switch
between daytime working mode and night working mode. If
automatic switching is desired, you may set the IR control
to Auto in the menu. Now, the recorder may automatically
switch to IR night vision mode according to ambient the
brightness of light.
Deleting a File
You cannot delete any video le from the memory card
by using the device itself. To delete a video le, you must
connect the device to a computer and delete it from the
USB drive via the computer.
Videos and Photos Review/Playback
In the standby mode, press the RETURN key to check
the playback list. Use the UP or DOWN key to select a
desired item as shown below:
Press the OK key to check the playback list. Use the UP
or DOWN key to select a le to play.
During playback, press the OK key to pause or play.
Press the RETURN key to return to the previous menu.
Videos Photos Audios
REXING P1 DEVICE — Video Review
R
OK

2322
Computer Playback
When the device is connected with a computer via the
Mini-USB cable, the computer will recognize the device
as a USB Drive where you can nd videos and photos are
saved under two separate folders. Open the folder, and
you’d be able to review the video/photo from the list.
Reset & Restart
When the device system crashes or gives no response
due to improper operation or other special reasons,
you may press the RESET key (be careful to apply light
pressure) with a pen tip, toothpick, or other similar article.
The device switches o after the reset key is pressed.
Now, you can restart the device. Previous settings will be
resumed after the restart.
Notes on the Indicators
1. In the power-on state, the power indicator is not
shown in the preview screen.
2. In the power-on state, the working indicator light turns
red and ashes slowly under camera shooting mode.
3. In the power-on state, the working indicator light
turns orange and ashes slowly under recording
mode.
4. When the data cable is connected, the working
indicator light turns green and the power indicator
light turns blue.
5. In the charging state, the power indicator light turns
blue and it extinguishes after charging.
6. In the power-on state, the power indicator light
ashes during each shot.
Instructions for IR light, flashing light, and
white light
In the power-on state, hold the UP key to turn ON/OFF
the IR indicator light, which is used to provide additional
illumination when shooting at night. Please make sure
that the IR Switching is set to Manual to enable this
function.
In the power-on state, hold the ENTER key to turn
ON/OFF the ashing light. The device alternately ashes
a red and blue light in addition to sounding a warning
alarm. This alarm functions in case of emergency.
In the power-on state, hold the DOWN key to turn
ON/OFF the white light. The device gives out a white light
for illumination.

2524
7. Product Parameters
Lens
Lanuage Selection
Video recording
Video rec. format
Video compression
Storage card
Video bitrate
Power
Battery
RAM capacity
Duration
Protection grade
Fall impact grade
Storage temp.
Ambient temp.
Operating system
F2.1 aperture, high resolution,
multilayer lter, wide angle lens
Japaneses/Simplied Chinese/English
1920x1080P 30PFS
1280x720P 30PFS
800x600P 30PFS
(three adjustable levels)
AVI
H.264
Built-in
8 Mbit/sec
5V/1A
Built-in
See decal axed on the device.
Continuous working hours: 11 hrs
Standby hours: 20 hrs
Expert
Withstands free-fall from a height
of 1.5 m
-40 ℃ ~+60 ℃
-10~+45 ℃
(Recording and charging must not
be performed in temperatures
above 45 ℃.)
Windows XP/7/8 SP3/Vista and
Mac 10.5 or above

2726
8. Troubleshooting 9. Name and Content Identification
of Toxic or Harmful Substances or
Elements
The device cannot be started, and it gives no
response to any operation.
1. Connect the device to its charger and recheck its
operation after charging for 4 hours.
2. Check the charger and its cable for any abnormalities.
3. Press the reset key to resume factory settings and
recheck device operation.
4. If the problem persists, contact after-sale service
personnel and return it to the vendor for repair.
Flushing image
1. Switch o the device and restart it.
Toxic/Harmful
Substances Shell and other
or Elements LCD module Circuit board asssy. Battery components
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent
chromiu (Cr6+)
Polynickel
biphenyl (PBB)
Polybro-minated
diphenyl ethers
(PBDE)
X
X
O
O
O
O
X
O
O
O
O
O
X
O
X
O
O
O
O
O
O
O
O
O
O: Indicates that the content of toxic and hazardous substances in all
homogeneous materials of the component is below the limit requirements
specied in SJT 11363-2006.
X: Indicates that the content of toxic and hazardous substances in at least
one homogeneous material of the component exceeds the limit requirement
specied in SJ/T 11363-2006.
The environmental protection life of the complete unit is 10 years, and the
environmental protection life of lithium battery module is 5 years.

2928
概要
このデバイスは、Rexingの高水準の設計、構造、技術的専門知
識を使用して、高品質のデジタル録画を提供します。このユー
ザーマニュアルでは、デバイスの機能について詳しく説明して
います。安全で適切な使用を確保するために、デバイスを使用
する前にこのマニュアルをお読みください。ここに含まれるす
べての説明は、デバイスのデフォルト設定に基づいていること
に注意してください。
• 画像とスクリーンショットは、実際の製品と外観が異なる場
合があります。コンテンツは最終製品またはサービスプロバ
イダーが提供するソフトウェアとは異なる場合があり、予告
なく変更される場合があります。
• このマニュアルの最新バージョンについては、Rexing
のWebサイト（www.rexingusa.com/support/product-
support）を参照してください
• 利用可能な機能と追加サービスは、デバイスとソフトウェア
によって異なる場合があります。
• アプリケーションとその機能は、国、地域、またはハードウェ
アの仕様によって異なる場合があります。
• Rexingは、Rexing以外のプロバイダーのアプリケーションに
起因するパフォーマンスの問題には責任を負いません。
• Rexingは、このマニュアルに記載されているデバイスのイン
ストールの失敗に起因するパフォーマンスの問題や非互換
性については責任を負いません。インストールをカスタマイ
ズしようとすると、デバイスまたはアプリケーションが正しく
動作せず、デバイスの誤動作やデータの破損や損失が発生
する可能性があります。これらのアクションは、Rexing契約
の違反であり、保証が無効になります。
• デバイスに付属しているデフォルトのアプリケーションは、
事前の通知なしに更新およびサポートの中止の対象となり
ます。デバイスに付属のアプリケーションについて質問が
ある場合は、認定RexingServiceCenterにお問い合わせく
ださい。
/rexingusa
@rexingdashcam
www.rexingusa.com/support/registration/

3130
1. 本製品の同梱物
本デバイスの付属品および使用可能な部品は、ご使用になる地
域によって異なる場合があります。デザインと仕様は予告なしに
変更される場合があります。全ての部品の可用性は、メーカーの
都合で変更される場合があります。
付属品は全て、本デバイスで使用するためだけに設計されてお
り、他製品ではご使用になれない場合があります。非承認の部
品を使用したことによる機能障害は、保証サービスの対象には
なりません。
ご利用いただける部品についての情報は、Rexingのウェブサイ
トwww.rexingusa.comをご確認ください。
1. RexingP1ボディカメラ
2. 電源アダプタ
3. ショルダーマウント
4. チェストマウント
5. 操作説明書
6. 安全ガイド
REXING P1 — What’s in the box
1 2
5
6 7
3
4
P1
User Manual
ユーザーマニュアル
The information in this manual is subject to change
without notice.
www.rexingusa.com 20Rev1
Safety Guide
安全ガイド
www.rexingusa.com

3332
RR
OK
2. カメラの概要
各部の名称
1. 録画ボタン
2. 録音ボタン
3. 上矢印ボタン
4. 下矢印ボタン
5. 赤ランプ
6. 赤外線ラ
ンプ
7. ライト
8. 電源ランプ
9. マイク
10. 青ランプ
11. 赤外線ラ
ンプ
12. COMOSセ
ンサー
13. 動作ラン
プ
14. カメラ
15. スピーカー
16. シャッター ボタン
17. MiniUSB端子
18. 電源ボタン
19. リセットボタン
20. ディスプレイ
21. メニューボタン
22. OKボタン
23. 戻るボタン
22
R
16
19
20
21
17
18 23
1
510
712
14
15
9
611
813
2
3
4

3534
HD 16:00:14
57.6G
PID: 000001 DSJ-D1: 000001
2020/03/02 16:20:52
HD 00:00:04
57.6G
2020/03/02 16:20:52
REXING P1 — LCD Screen
3. LCDディスプレイ指示アイコン
12
5
3
4
6 7 8
1. 録画解像度
2. 残り録画可能時間
3. 残り容量
4. 警察官ID
5. 機器ID
6. 日付
7. 時刻
8. バッテリー残 量アイコン
9. 赤外線暗視インジケータ
10. 現在の録画時間
4. デバイスの充電
本製品の充電方法には以下の2種類の方式が
あります。
1. 充電器に接続
2. パソコンに接続
上記の図で示す位置にUSBケーブルを挿入して、パソコン
と接続して充電を行います。充電中、動作ランプは緑色に、
電源ランプは青色に点灯します。充電が完了するとランプ
は消えます。
REXING P1 — CHARING DEVICE
USB充電モード
(入力電圧DC5V-1A)
HD 16:00:14
57.6G
PID: 000001 DSJ-D1: 000001
2020/03/02 16:20:52
HD 00:00:04
57.6G
2020/03/02 16:20:52
REXING P1 — LCD Screen
9 10

3736
電源オン
電源がオフの状態で、【電源】ボタンを短く押
します。電源がオンになるとプレビュー画面
が表示され、動作ランプが緑色に点灯します。
何も操作を行わないまま60秒が経過すると自
動的にディスプレイの保護モードになります。
録画を開始して60秒が経過すると自動的にデ
ィスプレイの保護モードになります。
5. 基本操作
電源オフ
電源がオンの状態で、【電源】ボタンを長押しすると、すべてのラ
ンプが消えます。【電源】ボタンを短く押すと、ディスプレイの保
護モードになります。
待機
電源がオンの状態で、何も操作を行わないまま60秒が経過する
と自動的にディスプレイの保護モードになり、ディスプレイの表
示が消え、動作ランプが緑色に点灯します。いずれかのボタンを
押すとディスプレイが点灯します。
メニュー 設 定
待機状態で、【メニュー】ボタンを短く押すと、「メニュー」設定画
面が表示されます。この画面で【上矢印】ボタンまたは【下矢印】
ボタンを押して、設定したい項目を選びます。【OK】ボタンを押し
て項目を確定し、【上矢印】または【下矢印】ボタンで設定を変
更します。設定が終わったら、もう一度【OK】ボタンを押すと、設
定の変更が保存されます。
システムの詳細な設定項目はここでは詳しく説明しません。ディ
スプレイには下記の図の通り表示されます。
電源
OK
メニュー
上矢印
下矢印
Settings
Video Resolution
Photo Resolution
LED
Video Time
Sound Cue
REXING P1 — LCD Screen
RR
OK

3938
録画解像度
【OK】ボタンを押して変更状態にしてから、【上矢印】または
【下矢印】ボタンを押して録画解像度を選択します。選択項目
には、1920x1080P30FPS、1280x720P30FPS、800x600P
30FPSの三種類があり、規定値は1280x720P30FPSです。変更
したい録画解像度を選択してから【OK】ボタンを押します。
画像解像度
【OK】ボタンを押して変更状態にしてから、【上矢印】または
【下矢印】ボタンを押して画像解像度を選択します。選択項目
には、8000X4500、5200X3900、4608X3456、4000X3000の
四種類があり、規定値は5200X3900です。変更したい画像解
像度を選択してから【OK】ボタンを押します。
赤外線切り替え
【OK】ボタンを押して変更状態にしてから、【上矢印】または【下
矢印】ボタンを押して設定を選択します。選択項目には自動と
手動があり、規定値は手動です。変更したい設定を選択してから
【OK】ボタンを押します。
録画時間
【OK】ボタンを押して変更状態にしてから、【上矢印】または
【下矢印】ボタンを押して録画時間を選択します。設定可能な
録画時間の長さは、1、2、3、5、10、15、20、30分間で、規定値は
5分間です。変更したい録画時間を選択してから【OK】ボタンを
押します。
音声メッセージ
【OK】ボタンを押して変更状態にしてから、【上矢印】または
【下矢印】ボタンを押して設定を選択します。選択項目にはオン
とオフがあり、規定値はオンです。変更したい設定を選択してか
ら【OK】ボタンを押します。
電源オフタイマー
【OK】ボタンを押して変更状態にしてから、【上矢印】または
【下矢印】ボタンを押して設定を選択します。選択項目には
1、3、5、10分間、オフなどがあり、規定値は3分間です。変更し
たい設定を選択してから【OK】ボタンを押します。