RGBlink MSP 211 User manual

Mini Video & Audio Converter User Manual
RGBlink Science & Technology Co., Ltd.
The pictures and data in the user manual are consult only, if there is
fluctuation, according to the real object please!
MSP 211
HDMI to DVI

Contact Us
Headquarter: S603 Weiye Building Torch Hi-Tech Industrial Development Zone
Xiamen,Fujian Province, P.R.C
Shenzhen office: Room A05, Floor 4, Building 24, Industry factory Nanshan
Science & Technology Park, Shenzhen, Guangdong Province, P.R.C
Beijing office: No.27,west circle 3,Haidian District, Beijing, P.R.C
Tel: [phone] Fax：[phone]
QQ:505941001 MSN：rgblin[email protected]
Skype: rgblink Email: [email protected]
File version
Version Date ECO#
Description principal
1.0 2010/10/19 0001 Release LISA

目录
1.0 Safety........................................................................................... 1
2.2 Specification/Parameters ............................................................ 2
3.0 Description of button and interface.................................................... 3
3.2 Interface description ....................................................................... 4
4.0 Communication Software Control Guide ............................................. 5
4.1 Running software ...................................................................... 5
5.0 User Quick Start ............................................................................. 9

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 1
1.0 Safety
The proper use of power
The operating voltage for this product is 12V. This product is only
workable under correct power condition, which is already mark on
the back panel of the power.
High Voltage
There are many high voltage components inside.
Do not Remove Covers and Panels
Do not remove Covers in any conditions. There are not any spare
components inside for maintenance, so do not maintain this product
by userrselves, any requirement, please feel free to contact our
service engineer. Keep heavy device from power cord.
Grounding the Product and Use the Proper Fuse
This product is grounded through the grounding conductor of
the power cord. To Avoid electrical shock, plug the power cord into
a properly wired receptacle before connecting to the product input
or output terminals.
Keep away from Magnet, Motor, TV and Transformer.
Guard Against Damp
Keep using inside clean and dryness environment, once the
device get wet, must remove power cord right now.
Keep away Exploder
Do not operate the device inside dangerous and easy explosive
gas, which it may make fire, blast or something without
expectation.
Keep away Pour Liquid and Fragment
It is forbid to pour liquid, metal fragment or anything else inside
this device to avoid fire and other accident. Once that happens,
must remove power cord and try to make it clean before power on
again.

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 2
2.2 Specification/Parameters
DVI Input
Number of Inputs 1
Connector Standard DVI-I socket
Input resolution
（Supported Standards）
480i;480p;576i;576p;720p@50;720p@60;
1080i@50;1080i@60;1080p@50;1080p@60;800x600@60Hz
1024x768@60Hz;1024x768@75Hz;1280x768@60Hz;
1280x1024@60Hz;1440x900@60Hz;1400x1200@60Hz;
1600x1200@60Hz;1680x1050x60Hz;
HDMI output（Share with DVI output）
Number of Inputs 1
Connector Standard DVI-I socket
Input resolution
（Supported Standards）
480i;480p;576i;576p;720p@50;720p@60;1080i@50;
[email protected];1080i@60;1080p@50; [email protected];
1080p@60;800x600@60Hz;1024x768@60Hz;1024x768@75
Hz;1280x768@60Hz;1280x1024@60Hz;1440x900@60Hz;14
00x1050@60Hz;1600x1200@60Hz;1680x1050x60Hz;
DVI output（Share with HDMI output）
Number of Inputs 1
Connector Standard DVI-I socket
Input resolution
（Supported Standards）
480i;480p;576i;576p;720p@50;720p@60;1080i@50;
[email protected];1080i@60;1080p@50; [email protected];
1080p@60;800x600@60Hz;1024x768@60Hz;1024x768@75
Hz;1280x768@60Hz;1280x1024@60Hz;1440x900@60Hz;14
00x1050@60Hz;1600x1200@60Hz;1680x1050x60Hz;
Audio output
Number of outputs 2
Connetor Standard 1/4” socket
Audio standard 48Kbps 24bit balance analogue audio
Extras
Communication RS422
Working Environment 0°C~45°C
Power Supply +12V 3.5” interface power module
Stored Environment 10% to 90%
Product Warranty 1 years

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 3
3.0 Description of button and interface
3.1 Front panel interface description
1. DVI input interface.Input the video & graphic signal from computer, DVD player,
HDTV media player, DVI signal generator, HDMI signal generator and so on.（For
HDMI input, use HDMI to DVI cable. Does not comments to support
hot-plugging）
2. LED indicator:
Red Light: power indicator LED, it’s on when device has power supply;
Green Light: Green means there is signal input;
3. COM，be used for host computer control. Please check User Quick Start for more
detail;
4. Power，This device uses the standard 12V/1.5A power supply.

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 4
3.2 Back panel interface description
1-2. AUDIO output interface, used to access speaker or the audio amplifier system
which compatible with 3.1 system.The audio of the HDMI signal will be separated
from the video and output through this connector.
3. DVI output interface，connect to the monitor or back end DVI device which has
DVI interface. （This Connection does not comments to support hot-plugging）The
video of the HDMI signal will be separated from the audio and output by this
connector.

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 5
4.0 Communication Software Control Guide
AVMSP series of mini converter is equipped with user-friendly communication
control software.
4.1 Running software
Double-click AVMSP software , Software interface is as follows:
Fig. 4.1 MSP 211 Control Software
zSerial settings
User can set Comm Port and Comm Speed (Baudrate) through “Comm setup”. User
can select current using serial port by the pull-down arrow. Comm Speed should be
115200.
Fig. 4.2 MSP 211 Serial setting

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 6
zLanguage settings
This software supports both Chinese and English; User can switch the language by
“language” menu.
Fig. 4.3 MSP 211 Language settings
zAdvance
In the advance menu, send CMD and device SN are only for engineers, Ordinary
user do not need to set.
Fig. 4.4 MSP 211 Advance
MSP203 can upgrade MCU and FPGA firmware inside MSP 211，before upgrade user
need to key in the password in the “Admin password” dialog.
Fig. 4.5 MSP 211 “Admin password”
Fig. 4.6 MSP 211 “Update”
Click path button, Find out the updated bin file.

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 7
Click “Start” button to update
Click “Log” in the Advance menu, you can find out the log toolbar at the bottom of
the software interface. Click “Log” again, the log toolbar will disappear from the
software interface. Shown as below picture:
Fig. 4.7 MSP 211 Control Software
Save，User can save current log to specified path to review.
Remove, User can remove the log.
Factory Reset：User can set the status to the factory status.
zAbout
User can find out the software version and related information in “About” menu.
Fig. 4.8 MSP 211 “About”

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 8
zHow to use
User need to choose current small converter Model in the pull-down frstly.
Shown as below：
Fig. 4.9 MSP 211 “Choose Model”
Click” on” button to open the serial, The button will become
when serialis opened. User can click the “Close” button if user want to close the
serial.
Click this button can download user config (settings) on software into
MSP 211, but could not sync user config inside MSP 211 which by buttons.
Click this button can exit software.
zInput
The device will automatically read and display the format of DVI input, as follows:
Fig. 4.10 MSP 211 Optional Pictures
zOutput
DVI output interface is compatible with HDMI 1.3; HDMI interface is able to
embedded audio; If use DVI protocol, audio should go by additional CANNON to play.
Select “Output Mute” to make device mute.
Fig. 4.11 MSP 211 Optional Pictures

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 9
5.0 User Quick Start
1. Connect DVI input from source and DVI output to back end device, audio to
audio player;
2. Connect one end of the power adapter with the device, the other end into a
socket. Plug in, red led light means the device get power, and green on means it got
signal input works.
If user wants to change the mini converter output protocol, for example, from
DVI to HDMI, should check following steps. Defaultly, the converter output as DVI.
3. How does PC software control the device?
When using PC with COM, users can connect the device to PC through cable RJ11 to
DB9.
1) Firstly connect the device by cable RJ11 to DB9, another end to PC or laptop if
with RS232 connector;
2) Double click the software of AVMSP , seen as follows:
Fig. 5.2 MSP 211 Control Software
①Select current small converter Model as MSP 211 in the pull-down.

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 10
②User can set Comm Port and Comm Speed (Baudrate) through “Comm setup”.
User can select current using serial port by the pull-down arrow. Comm Speed
should be 115200.
Fig. 5.3 MSP 211 Serial setting
Click” on” button to open the serial, The button will become .
Click this button can realize host computer software data sync with MSP
211.
Remark：When user change output format, SYNC should be started to make
device operate correctly, and this operation is saved to memory directly,
user do not need to do save operation seperately.
For other operations, please refer to the fourth part③Communication Software
Control Guide.