RGBlink D8 User manual

User Manual
Article No: RGB-RD-UM-D8 E003
Revision No: V1.3
D8

©Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
1
CONTENTS
Declarations .......................................................................................................................................................................3
FCC/Warranty........................................................................................................................................................... 3
Operators Safety Summary .................................................................................................................................4
Installation Safety Summary ...............................................................................................................................4
Chapter 1 Your Product .................................................................................................................................................6
1.1 Packing Configuration ................................................................................................................................... 6
1.2 Product Overview ............................................................................................................................................ 7
1.2.1 Front Panel ............................................................................................................................................. 7
1.2.2 Rear Panel ............................................................................................................................................... 8
1.2.3 Dimension .............................................................................................................................................. 9
1.3 Key Features....................................................................................................................................................10
Chapter 2 Install Your Product .................................................................................................................................11
2.1 Plug in Power..................................................................................................................................................11
2.2 Connect Signal Source and Control Computer..................................................................................11
2.3 Turn on Your Product..................................................................................................................................12
Chapter 3 Use Your Product ..................................................................................................................................... 13
3.1 Main Menu...................................................................................................................................................... 13
3.1.1 Device.................................................................................................................................................... 13
3.1.2 Settings................................................................................................................................................. 13
3.1.3 Load Presets........................................................................................................................................ 24
3.1.4 Language ..............................................................................................................................................25

©Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
2
3.1.5 Version ...................................................................................................................................................26
3.1.6 Input.......................................................................................................................................................26
3.2 XPOSE 2.0 Installation ................................................................................................................................. 27
3.3 XPOSE 2.0 Operation................................................................................................................................... 30
3.3.1 Login in XPOSE...................................................................................................................................30
3.3.2 System Setting....................................................................................................................................31
3.3.3 Output|Input|Overview ................................................................................................................... 35
3.3.4 Display Management.......................................................................................................................38
3.3.5 Layer Management...........................................................................................................................40
3.3.6 Preset Management.........................................................................................................................43
Chapter 4 Order Codes ...............................................................................................................................................45
4.1 Product Code ..................................................................................................................................................45
Chapter 5 Support ........................................................................................................................................................46
5.1 Contact Us....................................................................................................................................................... 46
Chapter 6 Appendix .....................................................................................................................................................47
6.1 Terms & Definitions ......................................................................................................................................47
6.2 Revision History ............................................................................................................................................. 52

©Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
3
Thank you for choosing our product!
This User Manual is designed to show you how to use this product quickly and make use of all the features.
Please read all directions and instructions carefully before using this product.
Declarations
FCC/Warranty
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area may cause harmful
interference, in which case the user will be responsible for correcting any interference.
Guarantee and Compensation
RGBlink provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of
guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred
during transport, as well as for material and manufacturing faults. RGBlink must be informed immediately in
writing of any complains.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the
date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of compliant,
RGBlink can repair the fault or provide a replacement at its own discretion within an appropriate period. If this
measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or
cancellation of the contract. All other claims, in particular those relating to compensation for direct or indirect
damage, and also damage attributed to the operation of software as well as to other service provided by RGBlink,
being a component of the system or independent service, will be deemed invalid provided the damage is not
proven to be attributed to the absence of properties guaranteed in writing or due to the intent or gross negligence
or part of RGBlink.
If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if the goods
are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer
of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser
will be rendered invalid. Not included in the guarantee coverage are system failures which are attributed to
programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal
maintenance are not subject to the guarantee provided by RGBlink either.
The environmental conditions as well as the servicing and maintenance regulations specified in this manual must
be complied with by the customer.

©Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
4
Operators Safety Summary
The general safety information in this summary is for operating personnel.
Do Not Remove Covers or Panels
There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. To
avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed.
Power Source
This product is intended to operate from a power source that will not apply more than 230 volts rms between the
supply conductors or between both supply conductor and ground. A protective ground connection by way of
grounding conductor in the power cord is essential for safe operation.
Grounding the Product
This product is grounded through the grounding conductor of the power cord. To avoid electrical shock, plug the
power cord into a properly wired receptacle before connecting to the product input or output terminals. A
protective-ground connection by way of the grounding conductor in the power cord is essential for safe operation.
Use the Proper Power Cord
Use only the power cord and connector specified for your product. Use only a power cord that is in good condition.
Refer cord and connector changes to qualified service personnel.
Use the Proper Fuse
To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating characteristics. Refer
fuse replacement to qualified service personnel.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Installation Safety Summary
Safety Precautions
For all device installation procedures, please observe the following important safety and handling rules to avoid
damage to yourself and the equipment.
To protect users from electric shock, ensure that the chassis connects to earth via the ground wire provided in the
AC power Cord.
The AC Socket-outlet should be installed near the equipment and be easily accessible.

©Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
5
Unpacking and Inspection
Before opening device shipping box, inspect it for damage. If you find any damage, notify the shipping carrier
immediately for all claims adjustments. As you open the box, compare its contents against the packing slip. If you
find any shortages, contact your sales representative.
Once you have removed all the components from their packaging and checked that all the listed components are
present, visually inspect the system to ensure there was no damage during shipping. If there is damage, notify the
shipping carrier immediately for all claims adjustments.
Site Preparation
The environment in which you install your device should be clean, properly lit, free from static, and have
adequate power, ventilation, and space for all components.

©Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
6
Chapter 1 Your Product
1.1 Packing Configuration
Note: AC Power Cable supplied as standard according to destination market.
1 x AC Power
Cable
D8 (HDMI 2.1)
1 x Network
Cable
1 x DB9 to USB
Cable
1 x DB9 to RJ11
Cable
1 x 8K HDMI
Cable
D8 (DP 1.4)
D8 PLUS
1 x AC Power
Cable
1 x Network
Cable
1 x DB9 to USB
Cable
1 x DB9 to RJ11
Cable
1 x 8K DP
Cable
1 x AC Power
Cable
1 x Network
Cable
1 x DB9 to USB
Cable
1 x DB9 to RJ11
Cable
1 x 8K HDMI
Cable
1 x 8K DP
Cable

©Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
7
1.2 Product Overview
The D series has always been regarded as the leader in presentation-level image quality processing at different
display stages in the industry. D8 continues to lead the display technology to become an 8K@60-level video
processor in the industry. Create a visual experience.
The D8 (HDMI 2.1) is standard with one HDMI 2.1 input interface; D8 (DP 1.4) is standard with one DP 1.4 input
interface; D8 PLUS is standard with one HDMI 2.1 and one DP 1.4 input interfaces. Models with different
configuration allow flexibility in application and can meet the requirements of 8K input signal transmission.
The D8 is equipped with a 4-inch LCD touch screen, which optimizes the overall front panel aesthetic design.
D8 Application Diagram
1.2.1 Front Panel
Touch Screen
Rack Mount Ears
Handle
Rack Mount Ears
Handle

©Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
8
Name
Description
Touch Screen
4-inch LCD touch screen allows you to directly control D8, which optimizes
the user experience.
Rack Mount Ears
Use with the load-bearing screws to fix device on the rack.
Handles
For carrying device.
1.2.2 Rear Panel
Name
Description
Input Interface
● D8 (HDMI 2.1) is standard with Single HDMI 2.1 Input Interface
● D8 (DP 1.4) is standard with Single DP 1.4 Input Interface
● D8 PLUS is standard with Single HDMI 2.1 Input Interface and Single DP 1.4
Input Interface
Output Interface
Standard with Quad HDMI 2.0 Output Ports
Input Interface
Power Switch
Power Interface
Ground Screw
Interface Protector
Output Interface
Communication Interface
D8 (HDMI 2.1)
Input Interface
Power Switch
Power Interface
Ground Screw
Interface Protector
Output Interface
Communication Interface
D8 (DP 1.4)

©Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
9
Communication Interface
Standard with 1xRS 232 Serial Port，1xLAN Network Port (preliminary），
1xIN-GENLOCK-LOOP Port (preliminary）
Power Interface
Connect standard power cable to device and plug into wall socket
Power Switch
Power on or off the device
Interface Protector
Used to pull out device, fix cables and protect interfaces from collision
Ground Screw
Increase the safety and reliability, and avoid accidents such as fire and
explosion caused by static electricity
1.2.3 Dimension
Following is the dimension of D8 for your reference:
Dimension: 484mm×378mm×88.9mm
D8 (HDMI 2.1)
D8 (DP 1.4)