RGBlink MSP 204 User manual

MSP 204 – Quick Start
Interfaces
MSP 204 Quick Start
Version 1.3
Page 1 of 2
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [e-mail] http://www.rgblink.cn
VIEWSIZE THE WORLD
NOTE
This quick start provides basic instructions for an experienced installer to set up
and operate MSP 204.
For full installation, configuration, and operation details, please refer to
MSP 204 user manual, which is available at www.rgblink.com.
SDI Output
Can connect the next level device with SDI
interface.
HDMI Input
Input the video signal from HD player,
DVD player and computer, etc.
USB Interface
Used to control the computer.
Power indicator 2 lights when device has power
supply.
LED indicator 4 lights when output SDI signal.
LED indicator 6 lights when connect USB to
computer.
Indicator
Functional Description Block Diagram
Interface Description
Input Interface
4
2Audio Input port3
Indicator
5
1HDMI Input Port
Audio Input
Input audio signals from DVD player,
set top box, hardware player, etc.
Indicator
When input analog audio signal, LED indicator4, 5 light,
when input digital AES/EBU signal, LED indicator4
lights.
Output and Other Interface
Interfaces
4
3SDI Output port
Indicator
6
1Power 2
5 USB Interface
Power
Connect one end of the power adapter with the
device, the other end into a socket. Plug in, power
indictor light means the device works normally.
The device uses the standard 12V/3A power supply.
Interface Description
Instructions
The dial switch upwards is OFF, downwards is ON：
1. Dial switch1 OFF: mute.

MSP 204 Quick Start
Version 1.3
Page 2 of 2
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [e-mail] http://www.rgblink.cn
Functional Description
1. HDMI input to SDI output.
2. Support input and output resolution of 480i, 576i,
720p, 1080i and 1080p.
3. Support left and right analog sound channel input,
digital AES/EBU input, HDMI embedded audio input
and mute function.
Functional Description
4. The LED indicator beside SDI interface lights when
output SDI signal.
When input analog audio signal, the LED indicators
beside L-ANALOG and R-ANALOG light.
When input digital AES/EBU signal, the LED
indicator beside L-ANALOG or AES/EBU lights.
2. Dial switch 1 ON: cancel mute.
3. Dial switch 2 must be set to ON.
4. Dial switch 7 OFF: HDMI embedded audio output, no
analog audio and AES/EBU audio output.
5. Dial switch 7 ON, no HDMI embedded audio output,
analog or AES/EBU audio output (depend on dial
switch 8).
6. Dial switch 7 ON, dial switch 8 OFF: AES/EBU
output, no analog audio output.
7. Dial switch 7 ON, dial switch 8 ON: L-analog and R-
analog audio output, no AES/EBU output.
Functional Description Block Diagram