RGBlink RMS 8424S User manual

RMS 8424S
USER MANUAL
Article No: RGB-RD-UM-RMS 8424S E001
Revision No: V1.4

RMS 8424S User Manual
CONTENTS
CONTENTS ..................................................................................................................................................... 1
Declarations .................................................................................................................................................. 2
FCC/Warranty ........................................................................................................................................ 2
Operators Safety Summary ................................................................................................................... 3
Installation Safety Summary.................................................................................................................. 3
Chapter 1 Your Product.................................................................................................................................. 5
1.1 In the Box......................................................................................................................................... 5
1.2 Product Overview............................................................................................................................ 6
1.2.1 Back Panel ............................................................................................................................ 7
1.2.2 Front Panel ........................................................................................................................... 9
1.2.3 Dimension .......................................................................................................................... 11
Chapter 2 Installing Your Product................................................................................................................ 12
2.1 Plugging in Signals ......................................................................................................................... 12
2.2 Plugging in Main Power................................................................................................................. 12
2.3 Turning on Your Product ............................................................................................................... 12
Chapter 3 Using Your Product...................................................................................................................... 13
3.1 Using the MENU Button ................................................................................................................ 13
3.2 Using the Menu ............................................................................................................................. 14
3.2.1 System Submenu ................................................................................................................ 14
3.2.2 Picture Submenu ................................................................................................................ 15
3.2.3 OSD Submenu..................................................................................................................... 16
3.2.4 Display Submenu................................................................................................................ 17
3.2.5 F Key Submenu ................................................................................................................... 18
3.2.6 VGA Setup Submenu .......................................................................................................... 19
3.3 Turn on/off the Monitor................................................................................................................ 20
3.4 Monitor the Audio......................................................................................................................... 21
3.5 User Defined the Function Key...................................................................................................... 22
3.6 Display Aspect Ratio ...................................................................................................................... 23
3.7 Display Current Settings ................................................................................................................ 24
3.8 Using TALLY Light ........................................................................................................................... 25
Chapter 4 Ordering Codes ........................................................................................................................... 26
4.1 Product .......................................................................................................................................... 26
4.2 Options .......................................................................................................................................... 26
4.2.1 Input Options...................................................................................................................... 26
Chapter 5 Support ....................................................................................................................................... 27
5.1 Contact Us ..................................................................................................................................... 27
Chapter 6 Appendix ..................................................................................................................................... 28
6.1 Specification .................................................................................................................................. 28
6.2 Installing Input Options ................................................................................................................. 30
6.3 Terms & Definitions ....................................................................................................................... 32
6.4 Revision History............................................................................................................................. 36

RMS 8424S User Manual
Thank you for choosing our product!
This User Manual is designed to show you how to use this video processor quickly and make use of all
the features. Please read all directions and instructions carefully before using this product.
Declarations
FCC/Warranty
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area may cause harmful interference, in which case the user will be
responsible for correcting any interference.
Guarantee and Compensation
RGBlink provides a guarantee relating to perfect manufacturing as part of the legally stipulated
terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for
damage incurred during transport, as well as for material and manufacturing faults. RGBlink must be
informed immediately in writing of any complains.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and
software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of
justified notice of compliant, RGBlink can repair the fault or provide a replacement at its own discretion
within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can
demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular
those relating to compensation for direct or indirect damage, and also damage attributed to the
operation of software as well as to other service provided by RGBlink, being a component of the system
or independent service, will be deemed invalid provided the damage is not proven to be attributed to the
absence of properties guaranteed in writing or due to the intent or gross negligence or part of RGBlink.
If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if
the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if,
after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all
guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are
system failures which are attributed to programs or special electronic circuitry provided by the purchaser,
e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by
RGBlink either.
The environmental conditions as well as the servicing and maintenance regulations specified in this
manual must be complied with by the customer.

RMS 8424S User Manual
Operators Safety Summary
The general safety information in this summary is for operating personnel.
Do Not Remove Covers or Panels
There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous
voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the
cover installed.
Power Source
This product is intended to operate from a power source that will not apply more than 230 volts rms
between the supply conductors or between both supply conductor and ground. A protective ground
connection by way of grounding conductor in the power cord is essential for safe operation.
Grounding the Product
This product is grounded through the grounding conductor of the power cord. To avoid electrical shock,
plug the power cord into a properly wired receptacle before connecting to the product input or output
terminals. A protective-ground connection by way of the grounding conductor in the power cord is
essential for safe operation.
Use the Proper Power Cord
Use only the power cord and connector specified for your product. Use only a power cord that is in good
condition. Refer cord and connector changes to qualified service personnel.
Use the Proper Fuse
To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating
characteristics. Refer fuse replacement to qualified service personnel.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Installation Safety Summary
Safety Precautions
For all RMS 8424S processor installation procedures, please observe the following important safety and
handling rules to avoid damage to yourself and the equipment.
To protect users from electric shock, ensure that the chassis connects to earth via the ground wire
provided in the AC power Cord.
The AC Socket-outlet should be installed near the equipment and be easily accessible.
Unpacking and Inspection

RMS 8424S User Manual
Before opening RMS 8424S processor shipping box, inspect it for damage. If you find any damage, notify
the shipping carrier immediately for all claims adjustments. As you open the box, compare its contents
against the packing slip. If you find any shortages, contact your sales representative.
Once you have removed all the components from their packaging and checked that all the listed
components are present, visually inspect the system to ensure there was no damage during shipping. If
there is damage, notify the shipping carrier immediately for all claims adjustments.
Site Preparation
The environment in which you install your RMS 8424S should be clean, properly lit, free from static, and
have adequate power, ventilation, and space for all components.

RMS 8424S User Manual
Chapter 1 Your Product
1.1 In the Box
Note:
USB is contained on the Warranty/Registration Card. Please keep.
AC Power Cord
Screen Film
Warranty Card
& USB Files
Screw Driver
QC Declaration
Antistatic Bag

Chapter 1: Your Product
RMS 8424S User Manual
1.2 Product Overview
High Resolution LCD Panel
Consists of two 8-inch, 16:9, 1024X3（RGB）×600LCD panel, with wide viewing angle and
19-inch 4U rack mount.
Underscan and Overscan
Switch between underscan and overscan mode.
Pixel to pixel zoom-in
The real time zoom-in function is to enlarge to the input video as pixel to pixel from the
center.
Safe area
The safe area is offered to mark an area of picture that can be seen on the television
screens.
Multi Input/Output
Support SDI, DVI, VGA and CVBS loop out.
3G-SDI Input
Accept 3G/HD/SD SDI input.
SDI embed audio output
Convert SDI embed audio to analog and output via 3.5mm earphone.
HDMI embed audio output
Convert HDMI embed audio to analog and output via 3.5mm earphone.
Image flip
Rotate the image by 180°.
User defined function keys
There are 2 function keys on the monitor front panel, and users could define the functions
to achieve shortcut.
User defined video title
User can edit a video title for the current camera, and the title will display on the top of
screen.

Chapter 1: Your Product
RMS 8424S User Manual
1.2.1 Back Panel
Input Connectors
4
DVI-I –DVI
Standard DVI signals can input. Additionally this DVI port supports VGA with the use of
a DVI to VGA adapter.
The DVI port supports up to HDMI 1.3 if the port format is set to HDMI.
6
BNC –3G-SDI
Standard 3G-SDI signals can input.
8
BNC-CVBS
Standard CVBS signals can input.
Output Connectors
3
DVI-I –DVI LOOP
Connect to the DVI input of the next RMS 8424S or the device with DVI input.
5
BNC –3G-SDI LOOP
Connect to the SDI input of the next RMS 8424S or the device with SDI input.
9
BNC –CVBS LOOP
Connect to the CVBS input of the next RMS 8424S or the device with CVBS input.
Note: it is valid only when switch the signal to AV channel.
Control Connectors
2
TALLY
TALLY control port (RS-232). The electrical level is as follows:
Electrical level: ≤5V
Voltage
Tally light condition
≤0.5V
ON
≥1.3V
OFF

Chapter 1: Your Product
RMS 8424S User Manual
0.5V-1.3V
Indeterminate state
7
USB-B –USB
Used to software upgrade and video playing.
Power Connection
1
Power Input
Connect with DC12V power adapter. And the power polarity is negative inside and
cathode outside.

Chapter 1: Your Product
RMS 8424S User Manual
1.2.2 Front Panel
3.5mm Earphone Jack
1
PHONE
3.5mm Earphone jack, for HDMI (supported by DVI input) and SDI embedded audio
monitoring.
Power
2
POWER
Power on/off indicator.
Plug in the power cord, push “POWER” button and the power indicator is turned on,
and after 10 seconds, the monitor will be switched on and get into working status.
Push the “POWER” button again, the indicator is turned off and monitor is switched off.
The monitor will memory the state before shutdown, and will keep the state when
startup the computer next time.
Note: Disconnect with power cable if the monitor will not be used for a period of time.
Multi-Function Buttons
13
Rotary Button
This button used for menu selections and confirmation.
Note: Push the knob to adjust volume when exit the menu system.
Buttons
3. 4
F1/F2 Button
User defined function key.
5
RATIO Button
Push the button, user can choose the ration 16:9 or 4:3.

Chapter 1: Your Product
RMS 8424S User Manual
6
ZOOM Button
Push the button, and turn the knob to zoom the pictures.
7
DISPLAY Button
Push the button to display safety mark, title and the current input signal information.
8~11
Dedicated Signal Buttons
For each of inputs on the back panel a dedicated backlit buttons are provided. Push the
knob, the signal is selected.
12
MENU Button
This button used for menu selections –refer to Using the Menu.
Push the button again will return to the last level menu or exit the menu.
TALLY Light
14
TALLY Light
Red, Green and Yellow TALLY indicator.

Chapter 1: Your Product
RMS 8424S User Manual
1.2.3 Dimension
Following is the dimension of RMS 8424S for your reference:

RMS 8424S User Manual
Chapter 2 Installing Your Product
2.1 Plugging in Signals
Connect signals to the product (ensure all devices are powered off first). Tighten connector
screws/locks where provided.
2.2 Plugging in Main Power
Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.
2.3 Turning on Your Product
Push “POWER” button and the power indicator is turned on, and after 10 seconds, the monitor
will be switched on and get into working status.

RMS 8424S User Manual
Chapter 3 Using Your Product
3.1 Using the MENU Button
Language setting
The language in menu is optional, it includes Chinese, English, etc. English is the default language.
Following is the operation for how to change English to Chinese, and the opposite applies as well.
1. Push the “MENU” button to enter to menu system.
2. Rotate the knob to select “OSD” and push the knob to confirm.
3. Enter to “OSD” option to select “LANGUAGE” and push the knob to confirm.
4. Rotate the knob to change “ENGLISH” to “CHINESE”.
5. Push the “MENU” button to return to menu system.
Submenu setting
1. Push the “MENU” button and it will display menu system.
2. Rotate the knob to select an item. The selected item will be highlighted display yellow.
Push the knob (select yellow ) to enter the selected item, rotate the knob to select the
parameter.
3. Under menu system, push the “MENU” button to back to previous menu, then push the
“MENU” button to exit.

Chapter 3: Using Your Product
RMS 8424S User Manual
3.2 Using the Menu
3.2.1 System Submenu
The System Submenu includes:
1. RATIO: Aspect ratio has two options, 16:9 and 4:3.
2. SCAN: “UnderScan” / “OverScan” selection.
3. ZOOM: “OFF”, “Zoom1” and “Zoom2” selection.
Zoom1: Canon DSLR scale zoom-in.
Zoom2: Pixel to Pixel zoom-in.
4. MARKER: Select and set the safe area scale from 80%, 85%, 90% 95% and user. In user mode,
user can adjust the width, height, POS X and POS Y of the marker.
5. FLIP: Select “ON” and push the knob to flip the picture by 180°.
6. FAC RESET: Select “ON” to recover all to factory setting.
7. TITLE: User defined title.
Yellow is the selected letters, rotate the knob to select the letters, and push the knob to input.
Max 10 letters are supported. After setting, push the knob to confirm, the system will display
the user defined title.

Chapter 3: Using Your Product
RMS 8424S User Manual
3.2.2 Picture Submenu
The Picture Submenu includes:
1. CONTRAST: The adjustment range is 0~100.
2. BRIGHTNESS: The adjustment range is 0~100.
3. SATURATION: The adjustment range is 0~100.
4. SHARPNESS: The adjustment range is 0~100.
5. COLOR TEMP: Color temperature, the selections includes: cool, medium, warm and user.
6. PIC MODE: User defined and preset picture modes, including dynamic, standard, mild and user.
7. HUE: 0~100 (Only available under CVBS NTSC input, other signal display gray and can not be
adjusted).

Chapter 3: Using Your Product
RMS 8424S User Manual
3.2.3 OSD Submenu
The OSD Submenu includes:
1. LANGUAGE: Can choose Chinese or English.
2. H-POSITION: Adjust the horizontal position of the menu window, the adjustment range is
0~100.
3. V-POSITION: Adjust the vertical position of the menu window, the adjustment range is 0~100.
4. DURATION: Menu timeout setting, the adjustment range is 5-60s, choose “Off”, it will
automatically exit if no operation, system default “Off”.

Chapter 3: Using Your Product
RMS 8424S User Manual
3.2.4 Display Submenu
Enter to “DISPLAY” submenu, to set the following items:
1. INFO: Select “ON”, screen will display input signal”, “RATIO”, “SCAN”, “MARKER”,
“FLIP”, ”ZOOM” and marker set information at the up-left.
Push the “F1” button to adjust the width of the marker, and push the “F2” button to adjust the
height of the marker.
2. MARKER: Safe area. Select “ON”, screen will display the safe area, and select “OFF” to close it.
3. TITLE: User edited title.
4. MODE: ”DISPLAY” or “TP”. Select and push “DISPLAY” option, screen will display the image.
Select “TP” and push ”DISPLAY”, screen will display test patterns to check if LCD screen operate
normally.
5. MARKER 4:3: Choose “ON”, then 4:3 scale mark on image.
6. AUTO TP: Choose “ON”, and open the auto test pattern function.
7. AUTO TIME: The auto switch time adjustment range is 5 to 30S.

Chapter 3: Using Your Product
RMS 8424S User Manual
3.2.5 F Key Submenu
Enter to “FKEY“ submenu, user defined F1/F2 functions.
The available function items are:
RATIO: Aspect ratio switch.
SCAN: Underscan / Overscan switch.
ZOOM: Picture Zoom-in.
FLIP: Image flip.
PIC MODE: Preset picture mode switch.
CLR TEMP: Color-temperature switch.
BW/COLOR: Color / Black & white switch.
AUTO TP: Auto test patterns.
UPDATE (USB): Via USB input, enter to “Software Upgrade (USB)”, and select “ON” can achieve
upgrade software.
USB PLAYER: “ON” or “OFF”, choose “ON”, user can open USB player.
SN NUM: Display the serial number (For read only).
MCU VER: Display the software version information (For read only).
SDI Version: Display the SDI version information (For read only).

Chapter 3: Using Your Product
RMS 8424S User Manual
3.2.6 VGA Setup Submenu
Enter to “VGA Setup” submenu to adjust VGA-HPOS (0~100), VGA-VPOS (0~100), CLOCK (0~100),
PHASE (0~100). Also can select “ON” at “AUTO ADJUST” to adjust when input VGA signal.