RGBlink MSP 325N User manual

Quick Start
MSP 325N

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
2
Content
1 Packing List................................................................................................................. 2
2. Device Interface.........................................................................................................3
3. Device Indicators.......................................................................................................3
4. Applications................................................................................................................ 4
5. Login to the device management page.................................................................4
6. Work with your device.............................................................................................. 5
7 Restore factory settings.............................................................................................7
8 Note...............................................................................................................................7

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
3
1 Packing List
(1) MSP 325N×1
(2) Power supply×1
(3) Warranty card×1
(4) Quick start guide×1
2. Device Interface
(1) Power Switch
(2) Power Port
(3) 3.5mm Line in/Line out
(4) HDMI Loop
(5) HDMI Input
(6) USB Port
(7) 1 GbE port with PoE
(8) Status indicator

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
4
(9) Reset（bottom）
3. Device Indicators
LED Indicators
Name
Color
Status
Description
Power
White
Always on
Power connected
Off
Power off or failure
LINK
White
Flashing
Network connected
Off
Network disconnected/abnormal
Run
White
Flashing
Working normally
Always on
Starting to work
Off
Working abnormal/not start
9

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
5
4. Applications
HDMI Video source
LOOP
Logging in PC
AC100~240V Power Supply
Switch
Power Adapter
DC12V
Network
Note:
Please use the standard power adapter equipped in the package. Likewise, other unqualified
power adaptor may damage the device.
Please make sure the camera is connected to the HDMI IN connector.
If you wish, you can connect MSP 325N to your monitor for real time preview by HDMI OUT.
5. Login to the device management page
Enter http://192.168.1.168/ in the browser to visit Web UI.Open the Web page of MSP 325N，
default username/password is admin/admin.
Note:
To ensure your information security, it is recommended to revise your password after you
log into for the first time.

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
6
6. Work with your device
6.1 Video input checking
After video source connected, you will be allowed to preview video in real time through web browser.
Kindly note the video preview window is under “image” mode by default, and it is refreshed every 3
seconds. If your computer’s CPU performance is good, you can click the mouse to switch to the “video”
mode, and the smoothness of the preview will be improved.
6.2 Streaming service
Click“+”on the right side of the stream service at the bottom of MSP 325N Web UI. Add a stream service,
take RTSP protocol as an example.
Select RTSP, fill in the name, service port and session ID, the other setting parameters can remain default
configuration, click “OK”.

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | s[email protected] | www.rgblink.com
7
After saving configurations, it will be displayed under the stream service, which is closed by default. Click
switch to start the stream service, it will come up a RTSP stream address in the corresponding address.
Click icon at the back of stream address, copy it and then check the encoded video stream by VLC.
Note:
The default RTSP port is 554, when add multiple RTSP service, different port number
should be used.
Session ID can be any combination of numbers, letters and symbol.
Download VLC tool
Download and install VCL tool through official website https://www.videolan.org/vlc/,
please follow the official VCL instructions for download method and installation process.
VLC is a multimedia player and framework with free and open cross platform, which
can play most of streaming media protocols.

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | [e-mail] | www.rgblink.com
8
Click media on the VLC - open network streaming - enter the URL address of RTSP over internet, click
play at the lower right corner to start streaming.
7 Restore factory settings
If the device cannot work normally after modifies the parameters or forgot internet IP configuration and
couldn’t search and find the device, please restore factory settings.
Two methods for restoring factory settings:
1) If you can login to web page, then via the WEB page, click "Settings—System settings--Restore
factory settings".
2) If you can’t login to web page, press the RESET button for 5 seconds in the bottom of device.
Note:
After restoring factory setting, below parameters will be turned to default value:
Login username and password will be “admin”;
IP address will be restored as 192.168.1.168, subnet mask will be 255.255.255.0;
All encoding parameters of video and audio will be restored to default value.
8 Note
To prolong the device life， please unplug the power and keep it properly if you do not use it for a long time.
Contact Information
Headquarter: S601 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
● Tel: [phone]
● Fax: [phone]
● Customer Hotline: [phone]
● Web: http://www.rgblink.com
● E-mail: [e-mail]