RGBlink MSP 203 User manual

MSP 203 – Quick Start
Interfaces
MSP 203 Quick Start
Version 1.3
Page 1 of 2
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [e-mail] http://www.rgblink.cn
VIEWSIZE THE WORLD
NOTE
This quick start provides basic instructions for an experienced installer to set up
and operate MSP 203.
For full installation, configuration, and operation details, please refer to
MSP 203 user manual, which is available at www.rgblink.com.
HDMI Output
Can connect television and video
projectors.
SDI Input
Input the video signal from HD player and
HD camera, etc.
Power indicator 2 lights when device has power
supply.
LED indicator 4 lights when output HDMI signal.
LED indicator 6 lights when connect USB to
computer.
Indicator
Functional Description Block Diagram
Interface Description
Input Interface
3
4Audio Input port
5
Indicator
6
1SDI Input Port
Audio Input
Input audio signals from DVD player, set top
box, hardware player, etc.
Indicator
When input analog audio signal, LED indicator3, 6 light,
when input digital AES/EBU signal, LED indicator3
lights.
Output and Other Interface
Interfaces
4
3HDMI Output port
Indicator
6
1Power 2
5 USB Interface
Power
Connect one end of the power adapter with the
device, the other end into a socket. Plug in, power
indictor light means the device works normally.
The device uses the standard 12V/3A power supply.
Interface Description
Instructions
The dial switch upwards is OFF, downwards is ON：
1. Dial switch1 OFF: mute.
2SDI Loop Out
SDI Loop Out
Can connect the device with SDI input.
USB Interface
Used to control the computer.

MSP 203 Quick Start
Version 1.3
Page 2 of 2
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [e-mail] http://www.rgblink.cn
4. The LED indicator beside HDMI interface long
lights when output HDMI signal and blinks when
output DVI signal.
When input analog audio signal, the LED indicators
beside L-ANALOG and R-ANALOG light.
When input digital AES/EBU signal, the LED
indicator beside L-ANALOG or AES/EBU lights.
2. Dial switch 1 ON: cancel mute.
3. Dial switch 2 must be set to ON.
5. Dial switch 7 OFF: SDI embedded audio output, no
analog audio and AES/EBU audio output.
6. Dial switch 7 ON, no SDI embedded audio output,
analog or AES/EBU audio output (depend on dial
switch 8), HDMI signal.
7. Dial switch 7 ON, dial switch 8 OFF: AES/EBU
output, no analog audio output, HDMI signal.
8. Dial switch 7 ON, dial switch 8 ON: L-analog and R-
analog audio output, no AES/EBU output, HDMI
signal.
Functional Description Block Diagram
Functional Description
1. SDI input to HDMI output.
2. Support input and output resolution of 480i, 576i,
720p, 1080i and 1080p.
3. Support left and right analog sound channel input,
digital AES/EBU input, SDI embedded audio
input and mute function.
Functional Description
4. Dial switch 6 ON, signal format is 480i, signal swap
CbCr.
9. Dial switch 7 OFF, dial switch 8 OFF: DVI signal,
no audio output.