RH Teen LANDIS QUILTED TWIN BED User manual

PARTS INCLUDED
A [1] Headboard
B [2] Side rail
C [1] Footboard
D [1] Slat Roll
TOOLS NEEDED:
ASSEMBLY INSTRUCTIONS
Bed must be assembled by at least two people.
Please read instructions carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts.
1.
3.
Place the Slat Roll (D) into the cleats on the inside of the Side Rail (B). Screw the ends of the Slats to the cleats using
Page 1 of 2
Screw (6), as shown in Diagram III.
Insert the Thread Rods (1) into the holes on the of Side Rails (B), and attach Curved Washers (2), Lock Washers (3),
Nuts (4) onto the Thread Rods (1).Tighten the Nuts (4) & Thread Rods (1) with Spanner Wrench (5) as shown in the
Diagram II.
2.
Stand the Headboard (A) upright and attach Side Rails (B), as shown in Diagram I.
CARE INSTRUCTIONS
Spot clean only with a soft, damp cloth.
Screw (4cm)
Allen Key (0.5cm Dia)
NO. Qty
1
2
DESCRIPTION
3
4
5
Thread Rod (0.8cm Diax11.5cmLength)
Curved Washer
Lock Washer
Spanner Wrench
Nut
4 Pcs
1 Pc
1 Pc
4 Pcs
4 Pcs
4 Pcs
30 Pcs
6
7
LANDIS QUILTED TWIN BED - ASSEMBLY INSTRUCTIONS
Phillips head--- Screwdriver (not included)
-

Diagram I
Diagram II
Diagram III
2
3
4
5
6
7
1
A
B
C