RH Teen CALLUM FLOATING NIGHTSTAND BED User manual

PARTS INCLUDED
A [1] HEADBOARD
B [1] HEADBOARD BASE
C [1] FOOTBOARD
D [2] SIDE RAILS
E [1] SLAT ROLL
F [2] NIGHTSTAND
NO. ITEM DESCRIPTION QTY.
4mm Allen Wrench
5/16" Flat Washer
5/16" Spring Washer
5/16" x 1-3/4" Bolt
1
2
3
4
16pcs
16pcs
16pcs
1pc
8x30mm Wooden Screw
54pcs
Page 1 of 2
(B)
(D)
ASSEMBLY INSTRUCTIONS
1. Attach the Headboard (A) to the Headboard Base (B) using Flat
Washer (1), Spring Washer (2), Bolt (3) and Allen Key (4), and
tighten (Diagram 1).
2. Attach the Side Rails (D) to the Headboard (A) & Footboard (C)
using Flat Washer (1), Spring Washer (2), Bolt (3) and Allen
Key (4), and tighten (Diagram 2).
(A)
3
4
(A)
TOOLS NEEDED
Phillips Head Screwdriver (not included)

3. Lay the Slat Roll (E) in between the Side Rails (D) and use Wood Screws (5) to fasten 2 end slats to the side rails with a screwdriver.
4. Attach the Nightstands (F) to the Headboard (A) securely. Insert Flat Washer (1), Spring Washer (2), Bolt (3) into the holes in the
Nightstands (F) and tighten using Allen Key (4) (Diagram 4).
Page 2 of 2
Philips Screwdriver
(Not included)
(A)
(A)
(F)
(F)
(A)
(F)
(F)
3
(E)
Diagram 3
Diagram 4