RH Teen CALLUM PLOATING NIGHTSTAND BED User manual

CALLUM PLOATING NIGHTSTANDB E D
PARTS INCLUDED:
ASSEMBLY INSTRUCTIONS:
STEP 1
STEP 2
A [1]
B [1]
C [1]
D [2]
E [1]
F [2]
HEADBOARD
HEADBOARD BASE
FOOTBOARD
SIDE RAILS
SLAT ROLL
NIGHTSTAND
1
2
3
4
5
1pc.
16pcs.
16pcs.
16pcs.
4pcs.
Flat Washer 5/16”
Allen Key 4mm
Wood Screw 8x30mm
Page 1 of 2
Spring Washer 5/16”
Bolt 5/16”x1-3/4”
NO. ITEM DESCRIPTION QTY.
1. Attach the Headboard (A) to the Headboard Base (B)
using Flat Washer (1), Spring Washer (2), Bolt (3) and
Allen Key (4), and tighten (as shown in step 1).
2. Attach the Side Rails (D) to the Headboard (A) &
Footboard (C) using Flat Washer (1), Spring Washer (2),
Bolt (3), Allen Key (4), and tighten (as shown in step 2).
TOOLS NEEDED:
Phillips Head Screwdriver
(Not included)
BA
D
A
3
4
A&B

CALLUM PLOATING NIGHTSTAND BED
CARE INSTRUCTIONS:
STEP 1
STEP 2
.
3. Lay the Slat Roll (E) in between the Side Rails (D)
and use Wood Screws (5) to fasten 2 end slats to
the side rails with a screwdriver, (as shown in step 3).
4. Attach the Nightstands (F) to the Headboard (A)
securely. Insert Flat Washer (1), Spring Washer (2),
Bolt (3) into the holes in the Nightstands (F) and
tighten using Allen Key (4), (as shown in step 4).
1. Dust often using a clean, soft, dry lint-free cloth.
2. Blot spills immediately, and wipe with a clean, damp cloth.
3. We do not recommend the use of chemical cleansers,
abrasives, or furniture polish on our lacquered finish.
Page 2 of 2
Philips Screwdriver
(Not included)
E
D
A
A
F
F
A
F
F
3