RH Turrell Task User manual

Turrell Task Table Lamp
PARTS ENCLOSED
(A)
Lamp Body
(B) Bolt
(C) Base
(D) Fabric Power Cord
(E) Lamp Arm
Page 1 of 2
(A)
(F)
(B)
(D)
(E)
(C)
(G)
(F) Shade
(G) Screw
1.
2.
3.

Turrell Task Table Lamp
This lamp has a polarized plug (one blade is wider than the
other) as a feature to reduce the risk of electric shock.
This plug will t in a polarized outlet only one way. If the plug
does not t fully in the outlet, reverse the plug. If it still does not
t, contact a qualied electrician. Never use with an extension
This xture has been rated for one (1) 8-Watt integrated LED
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your xture is fully assembled. To reduce the risk of re,
electrical shock, or personal injury, always turn off xture and allow it
to cool prior to replacing the lightbulb. Do not touch or look directly
at the bulb when xture is illuminated. Keep ammable materials
away from lit bulb.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
W A R N I N G : S T R A N G U L AT I O N HAZ AR D
AS S E MB LY & I NS TALLATION
1. Carefully remove all parts from the box and remove all plastic
coverings.
2.
5.
Lift the Fabric Power Cord (D) and insert the Lamp Body (A) into
3. If the Shade (F) gets loose, tighten Screw (G) on shade joint
CAR E INS TR UCTIONS
Wipe all surfaces with a soft, dry cloth. Do not use any harsh cleaners
(including ammonia-based products) or abrasives on your xture, as
Bolt (B) of lamp Base (C) and ensure it is secure.
they will damage the nish.
Page 2 of 2
I M P O R T A N T SA F E T Y I N S T R U C T I O N S
cord unless plug can be fully inserted. Do not alter the plug.
Assembly is complete.
4. Plug into proper electrical outlet and test xture.
W AR N ING S Do not move the lamp by grabbing only the lamp body to keep
using a Phillips-head screwdriver.
the heavy base from falling to the ground. Move the lamp by
holding both the body and the base.
energy-saving bulb (included). To avoid the risk of re, do not
exceed the recommended wattage.
Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3 years of age.
CAUTION:
REMINDER:
The LED bulb is replaceable. Please check with the RH service
center for more information.