RH FULCRUM User manual

FULCRUM TABLE LAMP
PARTS ENCLOSED
(A) Outer Glass Shade (1)
(B) Collar Ring (1)
(C) Bracket (1)
(D) Inner Glass Shade (1)
(E) Bulb (1)
(F) Cap (1)
(G) Knurled Ring (1)
(H) Socket Cover (I)

FULCRUM TABLE LAMP
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY
RECOMMENDED.
This lamp has been rated for one (1) 75-Watt maximum Type T
lightbulb (25-Watt bulb included) or one (1) 23-Watt compact
uorescent lightbulb (not included). To avoid the risk of re, do not
exceed the recommended wattage.
WARNINGS
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your lamp is fully assembled. To reduce the risk of fire, electrical
shock, or personal injury, always turn off lamp and allow it to cool
prior to replacing the lightbulb. Do not touch or look directly at the
bulb when lamp is illuminated. Keep flammable materials away from
lit bulb.
WARNING: This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
THIS PRODUCT IS NOT A TOY AND HAS NO
PLAY VALUE.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler
beds. Keep out of reach of children under 3 years of age.
ASSEMBLY & INSTALLATION
SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE FUSE
BOX OR CIRCUIT BREAKER PANEL.
1. Carefully remove all parts from the box and remove all plastic
coverings.
2. Remove Collar Ring (B) from Cap (F). Attach Outer Glass Shade
(A) to Cap (F) and secure with Collar Ring (B).
3. Attach Bracket (C) to the top of Socket Cover (H) and secure
with Knurled Ring (G).
4. Screw Inner Glass Shade (D) to Socket Cover (H).
5. Insert Bulb (E) into the socket.
6. Assembly is complete.
CARE INSTRUCTIONS
Do not use polishes or cleaners on the lamp. Wipe clean with a soft,
dry cloth.