
ASSEMBLY & INSTALLATION
1. Carefully remove all parts from the box and remove all
plastic covering.
2. Insert the LED Bulb (D) into the threaded socket.
3. Insert Harp (B) into the Harp Saddle (C).
4. Unscrew the Finial (A) from the Harp (B) and place the
desired shade (not included) over the Harp (B).
5. Attach the Finial (A) and tighten to secure the shade.
6. Plug into proper electrical outlet and test fixture.
7. Assembly is complete.
CARE INSTRUCTIONS
Do not use polisher or cleaners on your lamp. Wipe
clean with a soft, dry cloth.
IMPORTANT SAFETY INSTRUCTIONS
For safety purpose, this lamp equipped with a polarized plug
(one blade is wider than the other). If the plug does not fit
securely into the outlet, do not force it — contact a professional
electrician. Use an extension cord only if the plug can be fully
inserted into the cord’s socket. Never alter the plug in any way.
This fixture has been rated for one (1) 100-watt maximum
Type A standard bulb (not included), one (1) 23-watt compact
fluorescent bulb (not included), or one (1) 8.5-watt LED bulb (D)
(included). To avoid the risk of fire, do not exceed the recom-
mended wattage.
WARNINGS
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your fixture is fully assembled. To reduce the risk of fire,
electrical shock, or personal injury, always turn off fixture and
allow it to cool prior to replacing the light bulb.
Do not touch or look directly at the bulb when fixture is
illuminated. Keep flammable materials away from lit bulb.
WARNING: This product can expose you to lead, which is
known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
THIS IS NOT A TOY AND THE PRODUCT HAS
NO PLAY VALUE.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 ft away from cribs, bassinets, and toddler
beds. Keep out of reach of children under 3 years of age.
SONORA TABLE LAMP