RH ROBESON User manual

ROBESON TABLE LAMP
PARTS ENCLOSED
(A) Finial (1)
(B) Harp (1)
(C) Harp Saddle (1)
(D) LED Bulb (1)

ROBESON TABLE LAMP
IMPORTANT SAFETY INSTRUCTIONS
For safety purposes, this lamp is equipped with a polarized plug (one
blade is wider than the other). If the plug does not fit securely into
outlet, do not force it - contact a professional electrician. Use the
plug with an extension cord only if it can be fully inserted into the
cord’s socket. Never alter the plug in any way.
This fixture has been rated for one (1) 150-Watt maximum TYPE A
standard bulb (not included) or one (1) 42-Watt Compact Fluorescent
bulb (not included) or one (1) 4.5-Watt SBLED light bulb (D)
(included). To avoid the risk of fire, do not exceed the recommended
wattage.
WARNINGS
All wires are connected. When unpacking, be careful not to pull
wires, as a bad conection may result. Do not connect electricity until
your fixture is fully assembled. To reduce the risk of fire, electrical
shock, or personal injury, always turn off fixture and allow it to cool
prior to replacing the light bulb. Do not touch or look directly at the
bulb when fixture is illuminated. Keep flammable materials away
from lit bulb.
WARNING: This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
THIS IS NOT A TOY AND THE PRODUCT HAS NO
PLAY VALUE
WARNING: STRANGULATION HAZARD
Keep cord at least 3 ft away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3.
ASSEMBLY & INSTALLATION
1. Carefully remove all parts from the box and remove all plastic
covering.
2. Insert Harp (B) into the Harp Saddle (C).
3. Unscrew the Finial (A) from the Harp (B) and place the shade
(packed separately) over the Harp (B).
4. Attach the Finial (A) and tighten to secure the shade.
5. Insert Bulb (D) into threaded socket.
6. Plug into proper electrical outlet and test fixture.
7. Assembly is complete.
CARE INSTRUCTIONS
Do not use polishes or cleaners on your lamp. Just wipe clean with
a soft cloth.