RH KEMPTON UPHOLSTERED STORAGE BED User manual

KEMPTON UPHOLSTERED STORAGE KING AND CAL KING BED INSTRUCTIONS
PARTS INCLUDED
ASSEMBLY INSTRUCTIONS
HARDWARE INCLUDED
NO. ITEM DESCRIPTION QTY.
Allen Bolt
Lock Washer
Flat Washer
Allen Wrench
16 pcs.
16 pcs.
16 pcs.
1 pc.
1
2
3
4
1. Place the headboard (A) upright in the location you wish the bed to be in
when fully assembled. Remove all drawers from the storage rail (B).
2. Attach the storage rail to the headboard by using the Allen bolt (1), lock
washer (2) and flat washer (3) as shown in FIGURE 1.
3. Repeat the above procedure with the other storage rail to attach it to the
headboard, and then repeat to connect both storage rails to footboard (C).
A
B
C
D
[1]
[2]
[1]
[1]
HEADBOARD
STORAGE RAILS
FOOTBOARD
PLATFORM PANEL
Page 1 of 2
10/1/18

KEMPTON UPHOLSTERED STORAGE KING AND CAL KING BED INSTRUCTIONS
Set the Platform Panels (D) on both of the storage rails.
Insert the drawers. Assembly is complete.
4.
5.
Kempton Storage - Page 2 of 2
10/1/18
CARE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
1. Dust often using a clean, sofy, dry and lint-free cloth.
2. Blot spills immediately and wipe with a clean, damp cloth.
3. We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
1. Please read all instructions carefully before assembling.
2. For your safety, assembly by two or more adulst is strongly recommended.
3. Keep these instructions for future use.
4. Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity
of the item