Rheem RXHK-D01 User manual

DECORATIVE WALL GRILL
RXHK-D01 & D02
The decor tive w ll grill is designed for pplic tions which require
ventil tion for return ir for ir h ndlers which re inst lled inside
closets or w ll structures.
92-103404-04-01
FIGURE 1
1 Decor tive Door
1 Decor tive Door Fr me
2
2
2
#10-24 Thumb Screws
#10-24 Tinnerm n Clip
#10 Ret ining W sher
Qty. Description
Parts List
IN TALLATION IN TRUCTION
GRILLE FRAME
39-1/4
LOUVERED PANEL
RXHK-D01 = 23-1/2 CTC
RXHK-D02 = 26-1/4 CTC
!RECOGNIZE THIS SYMBOL AS AN INDICATION OF IMPORTANT SAFETY
INFORMATION!
!WARNING
THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED SERVICE PERSONNEL FOR PROPER INSTALLATION,
ADJUSTMENT AND OPERATION OF THIS UNIT. READ THESE INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING
INSTALLATION OR OPERATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN IMPROPER INSTALLATION,
ADJUSTMENT, SERVICE OR MAINTENANCE, POSSIBLY RESULTING IN FIRE, ELECTRICAL SHOCK, CARBON MONOXIDE
POISONING, EXPLOSION, PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

1. Verify the cutout dimensions of the w ll or closet re de-
qu te to ccount for the size of the fr me s illustr ted in fig-
ure 1.
2. Att ched tinnerm n clips to e ch side of the decor tive door
fr me s illustr ted in Figure 2.
3. Att ch decor tive door fr me to w ll or door structure using
qty 8 - #10 wood screws (screws not supplied with kit). Refer-
ence figure 2 for recommended drill loc tions. Note: The t-
t chment structure should be ble to support 30lb. lo d.
4. Insert the two thumb screws into the mounting holes on the
decor tive w ll grill nd thre d on the #10 ret ining w shers.
This will help prevent the thumb screws from being lost during
routine m inten nce. Reference Figure 3.
5. Insert the w ll grill into the fr me nd tighten the thumb
screws into the tinnerm n clips.
FIGURE 2
DECORATIVE WALL GRILLE A EMBLY IN TRUCTION FIGURE 3
CM 0212
43.625
42. 59
TYP.
39.625
TYP.
36.630
TYP.
6.995
TYP.
4.000
TYP.
.466
TYP.
4.063
TYP.
.534
TYP.
.000
.000
A
TYP. B
TYP.
C
MOUNTING HOLE
LOCATIONS
MOUNTING HOLE
LOCATIONS
TINNERMAN
CLIP
2 REQ’D
THREAD ON
RETAINING
WASHER
THREAD ON
RETAINING
WASHER
RXHK-D01 22.563 25.091 26.625
RXHK-D02 25.269 27.798 29.332
A (in.) B (in.) C (in.)