Richelieu E-Lock EVO E15 User manual

E-Lock EVO User Manual
Please read this manual carefuly before installation and keep if for future refernce

2
721ELOCKG900
Unscrew the four screws of the lock and of the lock strike and remove the correspondent boxes.
Loosen the nuts of the lock and of the lock strike and check the side (the standard side is right)
External view
Internal view – right
Internal view – left
View from indoors
Step 1

3
Install the strike plate
box and tighten the four
screws to fix it to the
body.
View from indoors
View from indoors
Apply the plates on the internal
side of the door using the
supplied double-sided tape.
Install the strike plate body and fix it using the dedicated nuts
Step 3
Step 5
Step 4
Unscrew the four screws of the front lock body, remove the box by extracting the cable band.
Rotate the glass plate of 180° maintaining the external keyboard in its position. Reposition the cable band and
fix the four screws.
Step 2 – Reversibility (from right to left)

4
Install the cover box and
screw tighten the four
screws to fix it to the lock
body.
Install the front lock
body and fix it using
the dedicated nuts.
Connect the back lock
body with the frontal one
by coupling the “cable
band” connector and
close the mechanism by
rotating the flap.
View from indoors
View from indoors
View from indoors
Step 6
Step 7
Step 8

5
System installation
Open the front panel cover (see step 9),
keep the “Reset” button on the back of
the panel pressed for 5 seconds, digit
“000#” to complete the inizialization.
After the reset, the language is English.
pulsante reset
Step 9 View from indoors
Unscrew the front
panel to insert the
batteries.

6
1-1
1-2
1-3
3. Recording
Android Sistem Apple Sistem
3

1-4 1-5 1-6
E15
E15
1-7 1-8
7

11
℃ ℃

：
：
：
：
：