Ricoh Pro C900s Quick start guide

Notes for Users
Please note the following corrections to these manuals.
About This Machine
Use the following procedure in place of the procedure shown in the manual.
Topic : Getting Started > Control Panel > Adjusting the Angle of the Control Panel
BQD 9S
1. Turn the handle to the left to unlock the horizontal joint securing the control panel.
2. Position the control panel at the horizontal angle that you require. Turn the handle
to the right to lock the joint.
BQD 1 S
1. Turn the handle upward to unlock the vertical joint securing the control panel.
2. Position the control panel at the vertical angle that you require. Turn the handle
downward to lock the joint.

Copyright © 2 8
Printed in France
GB GB D 16-51 7
Security Reference
The settings listed below appear in the manual, but this machine does not support
them. For this reason, disregard the following settings.
Topic : Appendix > User Settings -Control Panel Settings > System Settings
< Unsupported System Settings >
eneral Features:
Perfect Binding Cut Fine Adjustment *2
*2 The optional Perfect Binder must be installed.
Tray Paper Settings:
Tray Paper Settings: Perfect Binder Interposer Upper Tray *2
Tray Paper Settings: Perfect Binder Interposer Lower Tray *2
*2 The optional Perfect Binder Interposer Unit must be installed.
Timer Settings:
Binding Glue Heater Auto Off Timer *1
*1 The optional Perfect Binder must be installed.
Topic : Appendix > User Settings -Web Image Monitor Settings > Device Set-
tings
< Unsupported Device Settings >
Paper:
Perfect Binder Interposer Upper Tray: Paper Size
Perfect Binder Interposer Upper Tray: Custom Paper Size
Perfect Binder Interposer Lower Tray: Paper Size
Perfect Binder Interposer Lower Tray: Custom Paper Size
The manuals contain information related to log functions. However, this machine has
no log functions. For this reason, disregard all log-related information in the manuals.
User Settings
General Settings Guide / Security Reference
About Log Functions
D0165107