Ricoh M3 Quick start guide

Side Tray Type M3
Machine Code: D725
Field Service Manual
July, 2014
Subject to change

Revision Lists
Version Section Details
1.00 - Initial release of this document.
Created this manual for D146 series.
1.10
All Revised all sections according to the release
of D197 series.
Read This First > Safety and Symbols Modified some icons.
Replacement and Adjustment >
Drive Motor Unit
Modified items need to be removed in Step
2, 3, and 6.
Replacement and Adjustment >
Upper Paper Exit Sensor
Modified items need to be removed in Step 6
and Step 10.
Replacement and Adjustment > Left
Paper Exit Sensor
Modified items need to be removed in Step
3.
Replacement and Adjustment >
Upper Paper Exit Tray Set Switch Modified items need to be removed in Step
3.
Replacement and Adjustment >
Paper Exit Switching Unit Set Switch
1

Safety and Symbols
This manual uses several symbols and abbreviations. The meaning of those symbols and abbreviations
are as follows:
Clip ring
Screw
Connector
Clamp
SEF Short Edge Feed
LEF Long Edge Feed
[A] Short Edge Feed (SEF)
[B] Long Edge Feed (LEF)
Trademarks
Microsoft®, Windows®, and MS-DOS® are registered trademarks of Microsoft Corporation in the
United States and /or other countries.
PostScript® is a registered trademark of Adobe Systems, Incorporated.
PCL® is a registered trademark of Hewlett-Packard Company.
Ethernet® is a registered trademark of Xerox Corporation.
PowerPC® is a registered trademark of International Business Machines Corporation.
Other product names used herein are for identification purposes only and may be trademarks of their
respective companies. We disclaim any and all rights involved with those marks.
2

TABLE OF CONTENTS
Revision Lists........................................................................................................................................................1
Safety and Symbols............................................................................................................................................2
Trademarks.....................................................................................................................................................2
1. Replacement and Adjustment
Drive Motor Unit.................................................................................................................................................5
Upper Paper Exit Sensor....................................................................................................................................9
Left Paper Exit Sensor.......................................................................................................................................13
Upper Paper Exit Tray Set Switch...................................................................................................................14
Paper Exit Switching Unit Set Switch..............................................................................................................15
3

4

1. Replacement and Adjustment
Drive Motor Unit
1. Upper extension tray [A], Left extension tray [B].
2. Fixing plate [A] ( ×1).
5

3. Side tray [A] ( ×1).
1. Replacement and Adjustment
6

4. Drive motor unit cover [A] ( ×2).
5. Side tray rear cover [A] ( ×1).
Drive Motor Unit
7

6. Drive motor unit [A] ( ×3, ×2).
1. Replacement and Adjustment
8

Upper Paper Exit Sensor
1. Side tray (page 5).
2. Upper paper exit tray [A].
3. Drive motor unit cover (page 5).
4. Side tray rear cover (page 5).
5. Left paper exit cover [A] ( ×1).
Upper Paper Exit Sensor
9

6. Paper exit switching unit [A] ( ×1, ×1, ×1).
7. Paper exit switching unit cover [A] ( ×4).
1. Replacement and Adjustment
10

8. Guide plate [A].
9. Guide plate [A] ( ×1).
Upper Paper Exit Sensor
11

10. Upper paper exit sensor [A] ( ×1).
1. Replacement and Adjustment
12

Left Paper Exit Sensor
1. Upper paper exit tray (page 9).
2. Turn it upside down.
3. Left paper exit sensor [A] ( ×1).
Left Paper Exit Sensor
13

Upper Paper Exit Tray Set Switch
1. Upper paper exit tray (page 9).
2. Upper paper exit tray set switch cover [A].
3. Upper paper exit tray set switch [A] ( ×1).
1. Replacement and Adjustment
14

Paper Exit Switching Unit Set Switch
1. Open the Paper exit switching unit [A].
2. Paper exit switching unit set switch cover [A].
Paper Exit Switching Unit Set Switch
15

3. Paper exit switching unit set switch [A] ( ×1).
1. Replacement and Adjustment
16 EN