Ricoh D182 Manual

1
OR-C2 Training
Slide 1 Version 1.0
D182/D183/D184
Service Training
OR-C2
This course explains the new series of middle-range copiers OR-C2.

2
OR-C2 Training
Slide 2
Appearance
ARDF: Standard for
some models
Optional finisher
Optional one-
bin Tray
Optional two-tray
feed unit
No additional notes

3
OR-C2 Training
Slide 3
D182/D183/D184
Service Training
Product Overview
This section provides an overview of the machine, and the options that can be
installed.

4
OR-C2 Training
Slide 4
What Models are there in the Series?
Comparing Basic Specifications
OR-C2a (D182)
25 cpm
OR-C2b (D183)
30 cpm
OR-C2c (D184)
33 cpm
Controller: GW+
Contains new features introduced with the latest models
that use this controller
Java VM is standard (built into the controller)
USB/SD slots built into the operation panel
Memory
Basic models (no scanner or printer kits built in)
» 512 MB memory, no HDD
SP models (with scanner and printer kits built in)
» 1.5 GB memory, 250 GB HDD
No additional notes

5
OR-C2 Training
Slide 5
What Models are there in the Series?
Regional Variations in Standard Models
2 models
1) Basic model, no
ARDF, normal
operation panel
2) SP model, no
ARDF, normal
operation panel
2 models
1) Basic model, no
ARDF, normal
operation panel
2) SP model, no
ARDF, normal
operation panel
3 models
1) Basic model, no ARDF, normal
operation panel
2) SP model, ARDF, normal
operation panel
3) SP model, ARDF, Smart
operation panel
SP model only
ARDF is standard;
Smart Operation
Panel is option
C2c
2 models
1) Basic model, no
ARDF, normal
operation panel
2) SP model, no
ARDF, normal
operation panel
2 models
1) Basic model, no
ARDF, normal
operation panel
2) SP model, no
ARDF, normal
operation panel
3 models
1) Basic model, no ARDF, normal
operation panel
2) SP model, ARDF, normal
operation panel
3) SP model, ARDF, Smart
operation panel
SP model only
ARDF is standard;
Smart Operation
Panel is option
C2b
1 model
SP model , no
ARDF, normal
operation panel
1 model
SP model , no
ARDF, normal
operation panel
2 models
1) SP model, ARDF, normal
operation panel
2) SP model, ARDF, Smart
operation panel
SP model only
ARDF is standard;
Smart Operation
Panel is option
C2a
RCNRARERAC
Basic models can be upgraded with one or more of the following options:
Printer Unit Type M7
Scanner Enhance Option Type M7
Printer/Scanner Unit Type M7
Hard Disk Drive Option Type M7
Memory Unit Type M1 1.5GB
No additional notes

6
OR-C2 Training
Slide 6
Comparing Specifications with OR-C1
80 ipm (A4), 79 ipm (LT)50 ipmScanning Speed (max)
4.54.54.54.54.55.4First Copy Time
300 dpi200 dpiScanning Resolution
w/ HDD: 15.5 s, w/o HDD 14.5 sw/ HDD: 20 s, w/o HDD: 14 sWarm-up Time
31503150Paper Feed Capacity (max)
11501150Paper Feed Capacity (standard)
250 GB120 GBHDD
1.5 GB1 GBRAM (maximum)
9 inches8.5 inchesOperation panel
333025332823CPM
cbacba
OR-C2OR-C1
No additional notes

7
OR-C2 Training
Slide 7
Changes to the Engine
The machine is the same as the OR-C1, except for the
following points:
Scanner: This is the same as the MET-C1.
SBU board: This is also the same as the MET-C1.
Operation panel: This has been increased from 8.5 inches
to 9 inches. This is also the same as the MET-C1.
Boards: A GW+ controller is used. The BCU and IPU have
been changed.
Main switch: This is the same type as CH-C1 and MET-C1.
This means that the method of turning power off before
removing machine components is different from OR-C1.
The metal frame was modified because of the changes to
the scanner, controller board, and main PCBs.
No additional notes

8
OR-C2 Training
Slide 8
Yield of Consumables
Toner cartridges
360 g
11 k prints
Same toner as OR-C1
Yields are based on these conditions:
A4 (LT) long-edge feed
5% image coverage ratio

9
OR-C2 Training
Slide 9
Targets
Average Print Volume
OR-C2a: 4 k/month
OR-C2b: 5 k/month
OR-C2c: 7 k/month
No additional notes

10
OR-C2 Training
Slide 10
Reliability Information
PM Interval
Components of the PCU: 60k
Others: 120 k
MPBF Target (Mainframe)
OR-C2a: 102.6 k
OR-C2b: 106.4 k
OR-C2c: 111.1 k
Call Ratio Target (Mainframe)
OR-C2a: 0.039
OR-C2b: 0.047
OR-C2c: 0.063
Machine Life
OR-C2a: 900k or 5 years
OR-C2b: 1,200k or 5 years
OR-C2c: 1,800k or 5 years
No additional notes