Ricoh PJ LX3000ST User manual

RICOH PJ LX3000ST/LW3000ST Series
RICOH PJ XL4540/WXL4540

English
1
English
Table of Contents
Table of Contents ............................1
Usage Notice....................................2
Precautions.........................................2
Safety Labels of This Machine............7
Remote Control Battery ......................8
Regulation & Safety Notices ...............9
Other Information..............................14
Introduction....................................15
Product Features ..............................15
Package Overview............................16
Product Overview .............................17
Main Unit .............................................. 17
Control Panel........................................ 18
Input/Output Connections..................... 19
Remote Control .................................... 20
Remote Control Battery Installation...... 21
Remote Control Operating Range........ 22
Connecting the Projector ..................23
Connect to Computer/Notebook........... 23
Connect to Video Sources.................... 24
Powering the Projector On / Off........25
Powering On the Projector ................... 25
Basic Operations...........................26
Powering Off the Projector ................... 26
Warning Indicator ................................. 26
Adjusting the Projected Image..........27
Adjusting the Projector�s Height .......... 27
Adjusting zoom-in of the projector........ 28
Adjusting Projection Image Size
(Diagonal)............................................. 29
Control Panel & Remote Control ......31
Control Panel........................................ 31
Remote Control .................................... 32
User Settings .................................34
On-screen Display Menus ................34
How to operate .................................... 34
OSD Menu Tree ................................35
Picture .................................................. 38
Screen.................................................. 40
Setting .................................................. 42
Volume ................................................. 44
Options................................................. 45
Options | LASER Settings .................... 47
3D......................................................... 48
Troubleshooting ............................49
Maintaining the lter .....................54
VGA Analog.................................... 55
Appendices ....................................55
HDMI Digital ................................... 57
Congurations of Terminals ..............59
Terminal : Analog RGB
(Mini D-sub 15 pin)............................... 59
PC Control ........................................60
RS232 Port Setting............................... 60
RS232 Signals Connection .................. 60
Specications....................................61
Ceiling Mount Installation..................63
Trademarks .......................................64

2
English
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as
recommended in this user�s guide to maximize the life of
your unit.
■ Warning- This apparatus must be earthed.
■ Warning- Do not look into the projector’s lens when the
light source is on. The bright light may hurt your
eyes.
■ Warning- To reduce the risk of re or electric shock, do not
expose this projector to rain or moisture.
■ Warning- Please do not open or disassemble the projector
as this may cause electric shock.
■ Warning- When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 60 seconds for the
projector to cool down.
■ Warning- Do not use lens cap when projector is powered
on.
■ Warning- Turn on the projector rst and then the signal
sources.
■ Warning- Do not remove the cabinet cover, or you may be
exposed to dangerous voltage. Refer servicing to
qualied service personnel only.
■ Warning- The supplied power cord is for use with this
machine only. Do not use it with other
applianses. Doing so could result in re or
electric shock.

English
3
English
Usage Notice
■ Warning- This product should be operated only from the
type of power source which does not exceed the
voltage range specied on the rating label and
the power cord. If you are not sure of the type of
power supply to your home, consult your sales
representative or local power company.
■ Warning- Do not use the polarized plug with an exten-
sion cord , receptacle, or other outlet unless the
blades can be inserted completely with three
wire grounding type to prevent blade exposure.
Failure to follow these instructions may result in
re or electric shock.
■ Warning- Plastic bags can be dangerous, please do not
leave near babies and young children. To avoid
the threat of suffocation, please keep away from
their nose and mouth.
■ Warning- Installing the Projector on a Wall or Ceiling:
a) Do not attempt to clean or replace parts for a
machine that is installed in a high location on
a wall or ceiling. Doing so may cause it to fall
down, resulting in an injury.
b) Contact your sales or service representative
to clean or replace parts for a machine that is
installed on a wall or ceiling.
c) If a machine is incorrectly installed on a wall
or ceiling, it may fall down and cause an injury.
Contact your sales or service representative
if you want to install a machine on a wall or
ceiling.
d) Do not obstruct the machine’s vents. Doing
so risks re caused by overheated internal
components.
e) For users, do not install the projector by
yourself. Contact your sales or service
representative if you want to install the
projector on a wall or ceiling.

4
English
Usage Notice
f) For sales or service representatives:
- Use brackets that are strong enough to
support the projector. PJ WXL4540 Series
and LW3000ST Series projectors weigh
about 5.5 kg (12.2 lb.).
- The projector must be installed in a location
that is sturdy enough to support the full
weight of the projector and brackets.
- Use only the screws (four M4~16 screws)
provided with the projector to attach the
brackets to the projector.
- Use all three of the projector’s screw holes
to attach the brackets. The locations of the
screw holes are shown in the illustration
below. Make sure that the screws are
tightened rmly.
■ Caution- Never operate this unit on AC power during a
thunderstorm. If you see lightning or hear thun-
der, never touch the unit, cables and/or peripher-
als. An electric surge caused by the storm, may
result in an electrical shock or damage to the
unit.
■ Caution- Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a re or electric shock. Never spill liquid of any
kind on the product.
■ Caution- Do not place or keep the projector within the
reach of the children. It may fall or tip over, pos-
sibly causing serious injury.
■ Caution- Do not stack other equipment on this product
and do not place this product on other equip-
ment. The top and bottom surface of this product
increase in temperature during normal use and
may damage the other unit.
■ Caution- Do not use attachments not recommended by
the product manufacturer. Use of an incompat-
ible attachments could cause hazards or damage
to the product.

English
5
English
Usage Notice
■ Caution- Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and
serious damage to the product.
■ Caution- Unplug this product from the wall outlet and take
the product to qualied service personnel if you
encounter any of the following conditions:
a) The power supply cord or plug is damaged.
b) Liquid has been spilled, or objects have fallen
into the product.
c) The product has been exposed to rain or
water.
d) The product does not operate normally when
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions.
e) The product has been dropped or damaged in
any way. (If the cabinet should break, please
handle with care to avoid injury.)
■ Caution- Do not place anything in front of the lens while
the projector is operating Things placed in front
of the lens may overheat and burn or start a re.
■ Caution- Unauthorized substitutions may result in re,
electric shock, or other hazards.
■ Caution- Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to verify that the product is in
proper operating condition.
■ Caution- Do not leave thermal paper documents or easily
deformed items on top of the unit or near the air
exhaust for long periods of time.

6
English
Usage Notice
Do:
■After unpacking this product, read the manual carefully, and fol-
low all the operating and other instructions.
■Turn off the product before cleaning.
■Use a soft cloth moistened with mild detergent to clean the
display housing.
■Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Do not:
■Block the slots and openings on the unit provided for ventilation.
■Use abrasive cleaners, waxes or solvents to clean the unit.
■Use under the following conditions:
- Extremely heat, cold or humidity.
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic eld.
- In direct sunlight.
Important:
Contents of this manual are subject to change without prior notice.
In no event will the company be liable for direct, indirect, special,
incidental, or consequential damages as a result of handing or
operating this product.
■ Caution- The heat from the unit could erase the informa-
tion on the thermal paper, or cause deformation
or warping.
■ Caution- Do not use the product in a closed installation
location. Do not place the product in a box or in
any other closed installation location. Otherwise
it may overheat, which could result in a risk of
re.

English
7
English
Usage Notice
1
3
2
6 4
5
DANGER-CLASS 4 LASER RADIATION WHEN OPEN AVOID EYE
OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION
DANGER-RAYONNEMENT LASER DE CLASSE 4-EN CAS
D’OUVERTURE EXPOSITION DANGEREUSE AU RAYONNEMENT
DIRECT OU DIFFUS DES YEUX OU DE LA PEAU
Safety Labels of This Machine
1 Do not block the air intake or exhaust. Doing so could cause a re
due to internal overheating. Do not place your hands, face, or other
objects near the air exhaust, the bottom of the unit. Doing so could
result in injury and/or damage the object.
2 Do not look into the lens while the light source is on. The strong
light from the light source may cause damage to your eyesight.
3 Do not place anything in front of the lens while the projector is op-
erating. Things placed in front of the lens may overheat and burn or
start a re. If you want to temporarily stop the projected image, use
the AV mute on the remote control or the keypad.
4 Do not remove any screws. Do not block or cover the vents.
If you wish to discard this product, please contact your local authorities,
the shop where you bought this product, your local dealer or sales/ser-
vice representatives.

8
English
Usage Notice
If you wish to discard this product, please contact your local authori-
ties, the shop where you bought this product, your local dealer or
sales/ service representatives.
Warning
• Never throw batteries into a re.
Using the batteries improperly may cause them to explode or leak
and may result in serious injury. If battery-leaking uid contacts
skin, wash the uid off immediately with clean water and consult a
doctor. If the uid spills on an instrument, avoid contact and wipe
it off using tissue paper. Then dispose of the used tissue paper as
ammable garbage after moistening the tissue with water.
• Do not ingest battery, Chemical Burn Hazard.
The remote control supplied with this product contains a coin cell
battery.
If the coin cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the
product and keep it away from children.
If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
Notes
• Be sure to use CR2025 lithium 3.0V coin battery.
• Dispose of batteries in a designated disposal area.
• Attention should be drawn to the environmental aspects of battery
disposal.
• If the remote control does not operate correctly, or if the operating
range becomes reduced, replace the battery.
• Avoid contact with water or liquid.
• Do not expose the remote control to moisture or heat.
• Do not drop the remote control.
• Dispose of used battery according to the instructions.
Remote Control Battery

English
9
English
Usage Notice
This appendix lists the general notices of your Projector.
Notice: Users in the United States of America
FCC notice
MODEL NAME: RICOH PJ XL4540
TRADE NAME: PROJECTOR
MODEL NAME: RICOH XL4540
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
This device has been tested and found to comply with the
limits for a Class B digital device pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can
be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
▀■Reorient or relocate the receiving antenna.
▀■Increase the separation between the device and
receiver.
▀■Connect the device into an outlet on a circuit different
from that to which the receiver is connected.
▀■ Consult the dealer or an experienced radio/television
technician for help.
Regulation & Safety Notices

10
English
Usage Notice
Notes to Users in the State of California
Perchlorate Material - special handling may apply, See www.dtsc.
ca.gov/hazardouswaste/perchlorate.
WARNING: Handling the cord on this product will expose you to
lead, a chemical known to the State of California to cause cancer,
and birth defects or other reproductive harm. Wash hands after
handling.
RESPONSIBLE PARTY: Ricoh Americas Corporation
5 Dedrick Place, West Caldwell, NJ 07006
Phone: [phone]
Notice: Shielded cables
All connections to other computing devices must be made
using shielded cables to maintain compliance with FCC
regulations.
Caution
Changes or modications not expressly approved by the
manufacturer could void the user’s authority, which is grant-
ed by the Federal Communications Commission, to operate
this projector.

English
11
English
Usage Notice
Declaration of Conformity for EU countries
▀■ EMC Directive 2004/108/EC (including amendments)
▀■ Low Voltage Directive 2006/95/EC
Notice: Users in EU countries
CE Marking Traceability Information
(For EU Countries Only)
Manufacturer:
Ricoh Co., Ltd.
3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555, Japan
Importer:
Ricoh Europe PLC
20 Triton Street, London. NW1 3BF, United Kingdom
User Information on Electrical and
Electronic Equipment
Users in the countries where this symbol shown in this section has
been specied in national law on collection and treatment of E-
waste.
Our Products contain high quality components and are designed to
facilitate recycling.
Our products or product packaging are marked with the symbol be-
low.
This product contains substances which are harmful to humans and
the environment.

12
English
Usage Notice
Notice: Users in Turkey
All Other Users
If you wish to discard this product, please contact your local
authorities, the shop where you bought this product, your local dealer
or sales/service representatives.
Laser Notice
• This Product is classied as Class 2 of IEC60825-1:2007 and also
complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No.50, dated June 24,2007. (For USA)
• IEC 60825-1:2014 and IEC 62471: CLASS 1 LASER PRODUCT -
RISK GROUP 1. (For EU countries and Japan and China)
Light source specication
3.5W laser diodes x 19
Wavelength: 440-455nm
Pulse duration: 1.32ms
Warning
• This projector has built-in laser module.
Possibly hazardous optical radiation emitted from this product.
Do not stare into the beam. May be harmful to the eyes.
Caution
• Use of controls or adjustments or performance of procedures
other than those specied herein may result in hazardous radiation
exposure.
Laser emission
port

English
13
English
Usage Notice
Notice: Users in the EU
Note for the Battery and/or Accumulator
Symbol
In accordance with the Battery Directive 2006/66/EC Article 20
Information for end-users Annex II, the above symbol is printed on
batteries and accumulators. This symbol means that in the European
Union, used batteries and accumulators should be disposed of
separately from your household waste. In the EU, there are separate
collection systems for not only used electrical and electronic products
but also batteries and accumulators. Please dispose of them correctly
at your local community waste collection/recycling centre.
Notice: Users in Taiwan
⺊暣㰈婳⚆㓞
請勿將電池當作一般垃圾丟棄。這個標
誌表示電池不應視為一般垃圾丟棄。僅
適用於台灣。

14
English
Usage Notice
Other Information
Copyrights to Images
When projecting images using the projector, be careful
not to infringe the copyright of protected materials.
The following are examples that may infringe the copy-
right of protected materials.
• Broadcasting images or movies for commercial purposes
• Modifying images or movies using functions such as freeze,
magnify, or zoom to broadcast images for commercial pur-
poses or public viewing
• Varying the aspect ratio of images or movies using a function
that changes the screen size to broadcast images for com-
mercial purposes or public viewing
Note to Users Viewing 3D Images
Pay attention to the following points when viewing images us-
ing 3D glasses with projector:
• How 3D images are viewed may vary according to the indi-
vidual.
• Do not use 3D glasses for viewing any material other than
3D images.
• Before viewing 3D images, make sure to read the manuals
provided with your 3D glasses and 3D compatible content.
• Avoid viewing 3D images for a long period of time. Take a
break of 15 minutes or longer after every hour of viewing.
• If you feel sick while viewing 3D images, stop viewing them.
If you continue to feel sick, consult a doctor.
• When viewing 3D image in a room where on LED lighting
system or uorescent lights are used, you may feel that the
light in the room ickers. If this is the case, dim the lights until
you do not notice any ickers, or turn off the lights.
• If you or any member of your family has a history of light-sen-
sitive seizures, consult a doctor before viewing 3D images.

English
15
English
Introduction
Product Features
Outstanding features include:
■Single chip DLP®technology
■NTSC3.58/NTSC4.43/PAL(B/D/G/H/I/M/N)/SECAM
(B/D/G/K/K1/L) and SDTV(480i/576i), EDTV(480p/576p),
HDTV(720p/1080i/1080p) compatible
■ Multi-Auto functions: Auto detection, Auto image and Auto
saving the adjustments
■Full function remote control
■User friendly multilingual on screen display
■Advanced digital keystone correction and high quality full
screen image re-scaling
■Built-in mono 10-Watt speaker.
■UXGA, WXGA, SXGA+, SXGA, XGA compression and
VGA re-sizing
■Macintosh compatible

16
English
Introduction
Due to different
applications in
each country,
some regions
may have
different
accessories.
Documentation :
 
Read This First
 
User Manual (CD)
Remote Control
(with Battery)
CR2025
3V
Power Cord
Package Overview
Unpack and inspect the box contents to ensure
all parts listed below are in the box. If something
is missing, please contact your nearest customer
service center.
Projector VGA Cable
Use only the
VGA cable,
power code
provided with
the projector.

English
17
English
Introduction
Product Overview
Main Unit
1. Control Panel
2. Focusing Ring
3. Ventilation (inlet)
4. IR Receiver
5. Ventilation (outlet)
6. Speaker
7. Power Socket
8. Input / Output
Connections
9. Lens
The interface
is subject to
model’s
specications.
6
7
8
4
2
5
3
1
9

18
English
Introduction
Control Panel
1. Power LED
2. Enter
3. Temp LED
4. Light LED
5. Menu
6. Input
7. Four Directional Select Keys
8. Power/Standby button
9. IR Receiver
8
5
6
9
31 42
7