Ricoh Rigel-PJ1nx Y105 Manual

1
Rigel-PJ1nx Training
Slide 1
Y015/Y016
Service Training
Rigel-PJ1nx
Version 1.0
This training course provides service technician training for the Rigel-PJ1nx
series.
This model is more similar to the Sirius-PJ1 than the other members of the Rigel-
PJ1 series, so we made a separate training course.
This course will cover information related to service. To understand the features
of the machine, the correct ways to turn the projector on or off, about power
saving modes, and other matters that are related to operation, please study the
user guide.

2
Rigel-PJ1nx Training
Slide 2
Y015/Y016
Service Training
Product Overview
This section provides an overview of the machine, and the options that can be
installed.

3
Rigel-PJ1nx Training
Slide 3
What Models are there in the Series?
Rigel-PJ1 nx (Y015): PJ X5360N
4200 lumens, XGA resolution
Rigel-PJ1 nw (Y016): PJ WX5350N
3500 lumens, WXGA resolution
These are high quality standard models for
medium size conferences and classrooms (up to
30 persons)
These models can be used over a network.
Advanced networking features can connect
quickly to a LAN
Can project from a PC with wired or wireless
network
Management and control using PJLink software
No additional notes

4
Rigel-PJ1nx Training
Slide 4
Main Specifications
265W mercury lampLamp type
Standard: 358W (NA), 343W (EU)
Eco Mode: 271W (NA), 264W (EU)
Power Consumption
WXGAXGAResolution
YesHDMI
YesUSB
YesWired LAN
Option (USB)Wireless LAN
10W x 1Speaker
3.9 kg (8.6 lbs)Weight
398 × 282 × 126.5Dimensions (W×D×H)
Rigel-PJ1 nx: 0.65 to 13.8 m (2.17 to 45.25 ft)
Rigel-PJ1 nw: 0.69 to 14.6 m (2.25 to 47.75 ft)
Projection Distance
25” - 300” (63.5 – 762 cm)Projection Screen Size
VerticalKeystone
3500 lm4200 lmBrightness
LCDType of Projector
Rigel-PJ1 nwRigel-PJ1 nx
See the specifications table in the service manual for more details.

5
Rigel-PJ1nx Training
Slide 5
Features
This product can be installed by users, except
when mounted on a ceiling.
This product is designed for user maintenance.
Regular on-site maintenance is not needed.
LEDs show the symptoms for troubleshooting
(blinking/lit, number of times the LEDs blink, etc).
A service mode is available.
No additional notes

6
Rigel-PJ1nx Training
Slide 6
Take Care When Tilting
Do not tilt the projector to the left to right at an angle of
more than 10 degrees.
Do not tilt upward/downward from the horizontal plane.
No additional notes

7
Rigel-PJ1nx Training
Slide 7
Low Energy Consumption
3,500 hour lamp life and lower power
consumption in Eco mode
The life of 3,500 hours is only achieved if the
lamp is always used in Eco mode.
Lamp power in Eco mode is 80% of full power.
Power consumption values:
Eco Mode Off (Normal): 358 W (100-130 V), 343
W (200-240 V)
Eco Mode: 271 W (100-130 V), 264 W (200-240
V)
Standby (Normal): 9 W (100-130 V/200-240 V)
Standby (Power saving): 0.2 W (100-130 V), 0.4
W (200-240 V)
Note that in the service mode menu, Eco Mode is referred to as ‘Low Mode’.

8
Rigel-PJ1nx Training
Slide 8
Consumables and Options
Replacement lamp (Y204)
265W mercury lamp (Replacement Lamp Type 6)
Life: 3000 hours (normal mode), 3500 hours (Eco
mode)
» There may be a 50% decrease in brightness at the end
of the lamp’s life.
Wireless LAN unit (Y106)
IEEE 802.11b/g/n are supported
Wireless LAN Unit M1: For USA, Canada, Mexico, Brazil. Colombia, and Taiwan
Wireless LAN Unit M2: For CE Countries (27 EU countries, and Iceland,
Liechtenstein, Norway, and Switzerland), UAE, Saudi Arabia, Oman, South
Africa, Turkey, Egypt, Israel, Australia, NZ, Thailand, HK, Singapore, Malaysia,
Sri Lanka, Pakistan, Vietnam, India, Philippines, Peru, Chile, Argentina, Ecuador
Wireless LAN Unit M3: For Russia

9
Rigel-PJ1nx Training
Slide 9
Utilities
Projection Utility
A utility for projecting from a computer over a
network
Advanced Network Utility
This allows you to send images from a PC to
more than one projector at the same time.
JPEG Conversion Tool
@Remote
@Remote is not available on this model.
No additional notes

10
Rigel-PJ1nx Training
Slide 10
Reliability Information
Average monthly projection time: 77 hrs/month
3.5 hrs/day x 22 working days/month
Failure Rate
1st year: 0.0013 cases/unit/month
2nd year: 0.0014 cases/unit/month
3rd year: 0.0017 cases/unit/month
The failure rate of a projector increases with its
total power-up time. This is due in part to the
failure characteristics of optical engines in
projectors.
Lamp Life
Normal Mode: 3,000 hrs
Eco Mode: 3,500 hrs
No additional notes

11
Rigel-PJ1nx Training
Slide 11
Lamp Near-end/End Alerts
There is no near-end alert.
The lamp end alert occurs when the machine calculates
that the life time has expired.
If used in Normal Mode only, the alert appears after 3,000
hrs projection time
If used in Eco Mode only, the alert appears after 3,500 hrs
projection time
If the user switches between modes, the machine
calculates when to display the alert based on how long the
lamp was used in each mode.
If the projector is used for 100 hours after the lamp has
reached the end of its life, the projector will turn off and go
into standby mode.
In this condition, the lamp hours cannot be reset using the
menu.
The user must replace the lamp, then press the Help button
on the remote control for 10 seconds to reset the lamp
clock back to zero (do this only after replacing the lamp).
No additional notes

12
Rigel-PJ1nx Training
Slide 12
Disposal of Broken Lamps
Projector lamps normally contain mercury
vapour.
These lamps can rupture due to impact or being
used longer than their life expectancy.
The time that the breakage will occur differs
widely for each lamp and its circumstances of
use.
These lamps must be disposed of in accordance
with local environmental regulations.
No additional notes

13
Rigel-PJ1nx Training
13
Slide 13 13
Overview External View - Front
Slide 13 13
Overview External View - Front
1. Lamp Cover
2. Ventilation (outlet)
3. Lens Cover
4. Lens
5. Adjustable Tilt Foot Lever
6. Adjustable Tilt Foot
7. Controls
8. Focus Lever
9. Zoom Lever
10. Lens Shift Dial (Vertical)
11. Ventilation (inlet) / Filter Cover
12. Remote Sensor

14
Rigel-PJ1nx Training
14
Slide 14 14
Overview External View - Rear
Slide 14 14
Overview External View - Rear
1. Port Cover for USB Wireless LAN Unit
2. Mono Speaker
3. Terminal Panel
4. AC Input
5. Remote Sensor
6. Built-in Security Slot
7. Security chain opening
8. Rear Foot

15
Rigel-PJ1nx Training
Slide 15
Operation Panel
For details: Service manual > 1. Product Information > Overview
2. The left and right arrow buttons can be used to adjust the speaker volume.

16
Rigel-PJ1nx Training
Slide 16
Menus
Source Wireless LAN
Enabled
Eco Mode
High Altitude Mode High Temperature
Alert
Control Panel
Lock Enabled
Off Timer
Remaining Time
This slide shows the Input Menu, and explains the symbols that appear on the
menu screen.
For details of all functions, see the user’s manual.
High Altitude Mode: The fans operate at a higher speed in this mode. Use this
when the projector’s location is more than 1500 m (5500 ft) above sea level
(otherwise, the projector could overheat and shut down automatically).
¾Also, if you use high altitude mode at less than 1500 m (5500 ft) above sea
level, the projector could become too cool, causing images to flicker. Switch
[FAN MODE] to [AUTO].
High Temperature Alert: High temperature detected inside the projector, Eco
Mode is enforced
¾If the projector overheats, it shuts down automatically. Wait a few moments
then turn back on again.

17
Rigel-PJ1nx Training
Slide 17
Menus
This slide shows the other four menu tabs.
Note that in the Adjust, Setup, and Info tabs, there is more than one page.
¾For example, in the Adjust tab, there are three pages: Picture, Image
Options, and Audio.

18
Rigel-PJ1nx Training
18
Slide 18 18
9Interface
Overview Connection Ports
1. USB Port (Type A)
2. LAN Port (RJ-45)
3. USB (PC) Port (Type B)
4. HDMI In Connector (Type A)
5. Computer 2 Audio In Mini Jack (Stereo Mini)
6. Computer 2 In / Component Input Connector (Mini D-Sub 15 Pin)
7. S-Video In Connector (Mini DIN 4 Pin)
8. Computer 1 Audio In Mini Jack (Stereo Mini)
9. Computer 1 In / Component Input Connector (Mini D-Sub 15 Pin)
10. Audio Out Mini Jack (Stereo Mini)
11. PC Control Port (D-Sub 9 Pin ): Use this port to connect a PC or control
system. This enables the user to control the projector using serial
communication protocol. Be sure to use a cross cable.
12. Monitor Out (Comp.1) Connector (Mini D-Sub 15 Pin)
13. Video/S-Video Audio In (L/Mono, R) Connectors (RCA)
14. Video In Connector (RCA)

19
Rigel-PJ1nx Training
Slide 19
Locations of Main Units - 1
After removing the top cover, you see the main board.
This board must be removed to access the optical adjustments.
After you remove the main board, you can see these major subassemblies:
OPT BASE: Contains the LCD panels, cross prism, and projection lens housing
Engine unit: Contains the relay lens, field lens, polarizers and the dichroic mirrors
Integrators: These are the PBS units
Main Board
OPT BASE
Engine Unit
Integrators
Please ignore the callouts [A] and red circles in the diagram.

20
Rigel-PJ1nx Training
Slide 20
Locations of Main Units - 2
Lamp
Projection Lens
Power
Supply
Please ignore the callouts [A] and red circles in the diagram.